Operating instructions Freestanding coffee machine To avoid the risk of accidents or damage to the machine, it is essential to read these instructions before it is installed and used for the first time. en - GB M.-Nr.
Packaging material / Disposal of old machine Packaging material Disposing of your old machine The packaging material used protects the machine during transportation. Electrical and electronic appliances often contain valuable materials. They also contain materials which, if handled or disposed of incorrectly, could be potentially hazardous to human health and to the environment. They are, however, essential for the correct functioning of your appliance.
Contents Packaging material / Disposal of old machine . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Warning and Safety instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Guide to the machine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Display and controls . . . . . . . . . . . . . . . . . . . .
Contents Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Eco mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35 Info (display information) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Warning and Safety instructions This coffee machine complies with current safety requirements. Improper use can, however, present a risk of both personal injury and material damage. To avoid the risk of accidents and damage to the machine, please read these instructions carefully before using it for the first time. They contain important notes on setting it up, as well as on its safety, operation and maintenance.
Warning and Safety instructions Safety with children , There is a danger of burning and scalding from the coffee and hot water dispensing spouts. Children's skin is far more sensitive to high temperatures than that of adults. Ensure children do not touch hot surfaces of the coffee machine or place parts of their body under the dispensing spouts. ~ Place the coffee machine where it is out of the reach of children.
Warning and Safety instructions Technical safety ~ A damaged coffee machine is dangerous. Check it for any visible damage before setting it up. Never attempt to use a damaged coffee machine. ~ Before connecting the coffee machine to the mains supply, make sure that the rating on the data plate corresponds to the voltage and frequency of the household supply. This data must correspond in order to avoid the risk of damage to the machine. Consult a qualified electrician if in any doubt.
Warning and Safety instructions ~ If the coffee machine is installed behind a kitchen furniture door, it may only be used with the furniture door open. Do not close the furniture door while the coffee machine is in use. ~ Protect the coffee machine from water and water spray. Do not immerse the machine in water. ~ Repairs and other work by unqualified persons to the machine and the connection cable could be dangerous. The manufacturer cannot be held liable for unauthorised work.
Warning and Safety instructions Correct use , The spouts present a danger of burning or scalding. The liquids and steam dispensed are very hot. ~ Please note: – Keep well away from the area underneath the spouts when hot liquids and steam are being dispensed. – Do not touch hot components. – Hot liquid or steam could spatter from the spouts. Ensure that the central spout is clean and fitted correctly. – Water in the drip tray can also be very hot. Take care when emptying it.
Warning and Safety instructions ~ Only add ground coffee or cleaning tablets to the ground coffee chute. The cleaning tablets are used for degreasing the brew unit. ~ Only use milk without additives. Additives in milk usually contain sugar and this will stick to the milk pipework. ~ If using dairy milk make sure that it has been pasteurised. ~ Do not place any alcohol mixtures which are alight underneath the central spout. The flames could ignite plastic components and cause them to melt.
Warning and Safety instructions ~ Degrease the brew unit regularly with Miele cleaning tablets. Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. ~ Used coffee grounds should be disposed of with the organic rubbish or on the compost heap. Do not empty them down the sink, as they could block it. ~ The machine must not be used for cleaning objects.
Accessories The following accessories are included with your coffee machine depending on model: – Measuring scoop for ground coffee – Cleaning tablets for degreasing the brew unit (starter set) – Descaling tablets for descaling the water pipework (starter set) – Test strips for determining the water hardness level – Cleaning brush for cleaning the milk tube These products and other useful accessories can be ordered via the internet at www.miele-shop.
Guide to the machine a Master switch b Controls and display c Water container d Ground coffee chute e Coffee bean container f Grinder setting (behind the service panel) i Park position for milk pipework (behind the service panel) j Drip tray with lid and waste container k Milk tube aperture l Holder for drip tray cover and drip tray cover m Milk flask (not supplied) g Brew unit (behind the service panel) h Central spout with integrated cappuccinatore 13
Display and controls a On/Off - For switching the coffee machine on and off b Drink sensors For making . Espresso / Coffee H Cappuccino k Latte macchiato c Display Shows information about the current action or status d Back # For returning to the previous menu, cancelling unwanted actions e Arrow sensors Y X For displaying further options and highlighting a selection.
Before using for the first time Language Before using the coffee machine for the first time, please read these instructions and make yourself familiar with the appliance and its controls. ^ Use the arrow sensors to highlight the required language. Then touch OK. ^ Use the arrow sensors to highlight the required country. Then touch OK. Before using for the first time The setting is now saved. ^ Set up the coffee machine and remove any protective film (see "Installation").
Before using for the first time Water hardness Measuring water hardness The water hardness level indicates how much calcium is dissolved in the water. The higher the calcium content, the harder the water, and the harder the water, the more often the coffee machine will need to be descaled. You can measure the water hardness yourself using the enclosed test strip. Alternatively, your local water authority will be able to tell you the hardness of water in your area.
Operation To operate the coffee machine, touch the sensors with your finger. You are in the drinks menu when the display shows: To select an option ^ Touch the X and Y arrow sensors until the option you want is highlighted. To confirm your choice: { Miele ^ Touch OK. Select drink Exiting a menu or cancelling an action To exit the current menu: To make a drink, touch one of the drinks sensors. ^ Touch #. The "Other drinks" menu is accessed via the X menu.
Filling the water container The quality of the water plays an important part in the quality of the coffee. Warning. Bacteria can cause infection. It is important to empty and fill the container with fresh tap water every day to avoid the risk of bacteria building up. Hot or warm water or other liquids can damage the coffee machine. Do not use mineral water in the water container. It will cause serious limescale deposits to build up in your machine and damage it. ^ Press the lid on the right hand side.
Filling the coffee bean container Fill the coffee bean container with roasted coffee beans if you want to use freshly ground coffee beans for each cup of espresso or coffee. Alternatively, you can make coffee or espresso with ready ground coffee (see "Making coffee or espresso using ready ground coffee"). Warning. Only put roasted coffee beans in the container. Anything else, including ground coffee, will damage the grinder. Warning.
Switching on and off Switching on Switching off Switch the master switch on the left hand side of the machine to the "I" position. ^ Touch the On/Off sensor -. ^ Touch the On/Off sensor -. If the coffee machine has been used for making a drink it will rinse itself before switching off. The appliance will begin rinsing after the heating-up phase. Hot water will come out of the central spout. If a drink has been made using milk, the message "Place milk pipework in drip tray" will appear in the display.
Adjusting the central spout to the correct cup height You can adjust the central spout to suit the height of the cup you are using so that the coffee or espresso will not cool down as quickly and the crema will have a better consistency. ^ Pull the central spout down to the same level as the rim of the cup. or ^ Push the spout up until there is enough room to fit the cup or mug underneath.
Making drinks Espresso or coffee To make two portions You can dispense two portions into one cup or dispense two portions into two cups at the same time. To fill two cups at the same time: ^ Place a cup under the central spout. ^ Touch the sensor for the drink you want: . Espresso ^ Place a cup under each coffee spout. / Coffee ^ Touch °. X Select "Long coffee" from the Settings menu. ^ Touch the sensor for the drink you want.
Making drinks Cancelling preparation To cancel preparation: ^ Touch one of the drinks sensors again, or X for "Other drinks" again. Tip: Drink preparation can be cancelled by pressing the OK sensor as soon as "Stop" appears in the display. When making coffee with milk or two portions of a drink you can cancel each stage individually. ^ Touch OK. The machine will stop making the drink.
Making drinks Adding ready ground coffee Use the measuring scoop supplied so that the correct amount is used. Do not add more than one level scoop of ground coffee to the coffee chute. If too much is added, the brew unit will not be able to process the coffee. Making coffee with ready ground coffee If you want to make a drink with ready ground coffee: ^ Select "Yes" and touch OK. You can now select which type of drink you would like to make with ready ground coffee. ^ Place a cup under the central spout.
Making drinks Drinks with milk You can use bottled milk or cartons ,Caution. Danger of burning and scalding from the central spout. Liquids and steam dispensed from the spouts will be very hot. Do not use milk with additives. Most additives contain sugar which will adhere to the milk pipework and damage the machine. As soon as you select a drink containing milk the machine will start to heat up.
Making drinks ^ Place the end of the milk tube in the container making sure that it is sufficiently immersed in the milk. Making drinks with milk ^ Place a suitable container underneath the central spout. ^ Touch the sensor for the drink you want: H Cappuccino k Latte macchiato X Go to "Other drinks:" for Caffè Latte, Hot milk, Milk froth The selected drink will now be made. Stainless steel milk flask (optional accessory, not supplied) The stainless steel flask keeps milk cool for longer.
Coffee the way you like it You can customise your coffee machine to suit the type of coffee you are using. The "Parameters" menu , allows you to adjust the amount of coffee that is ground, set the brew temperature and deselect the "Pre-brewing" option. The parameters for each type of coffee can be individually specified. The grinder can also be set to suit the type of coffee beans being used. To avoid damaging the grinder, please note the following: Only adjust the grinder one setting at a time.
Coffee the way you like it Displaying and changing the parameters of a drink ^ Touch ,. The , sensor will light up. ^ Select the drink you want and touch OK. The current settings for the amount of coffee, brewing temperature and pre-brewing will be displayed for this drink. ^ Use the arrow sensors to change the amount. Then touch OK. The setting is now saved.
Coffee the way you like it Pre-brewing When the pre-brewing function is switched on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavour of the coffee. You can set pre-brewing for a normal length of time or an extra long length of time. Alternatively, you can switch off the " Pre-brewing " function. The machine is supplied with the "Pre-brewing" function switched off.
Portion size The flavour of the coffee produced depends not just on the type of coffee used, but also on the amount of water used. You can programme the amount of water to suit the size of your cups and the type of coffee you are using. For coffee drinks that use milk you can also set the amount of milk or milk froth to be dispensed. You can also set the portion sizes for hot milk and milk froth alone. Each type of drink has a maximum portion size that can be programmed into the machine.
Portion size Portion sizes for cappuccino and latte macchiato Portion sizes for caffé latte, hot milk and milk froth ^ Place a suitable container underneath the central spout. ^ Place a suitable container underneath the central spout. ^ Touch H or k until the ingredients for that drink are shown in the display. ^ Touch ,. Cappuccino: milk froth, espresso ^ Select "Portion size" and touch OK.
Settings Changing and saving settings You can use the "Settings" menu to customise the coffee machine to suit your individual requirements. ^ Touch X and select "Settings". Calling up the "Settings" menu ^ Select the required setting with the arrow sensors and touch OK. ^ Touch X and select "Settings". You can now check or change the settings. Options which are currently selected will have a tick ( next to them. Touch # if you want to access the previous menu.
Settings Overview of available settings The factory setting for each option is shown in bold. Option Available settings Language deutsch, english and other languages Country Time Clock format 12 h / 24 h Set Timer Set Switch on at / Switch off after (1:00) / Switch off at Activate Switch on at (Yes / No) / Switch off at (Yes / No) Eco mode On / Off Info Number of drinks Total portions / Espresso / Coffee / Cappuccino / Latte macchiato / Caffè Latte / Milk froth / Hot milk No.
Settings Language Timer You can select a language and country for all display texts. The timer offers the following options: Tip: If you select the wrong language by mistake, you can find the "Language" option by following the flag symbol J. Time You can set the clock display and the time of day. Clock format The options are: – 24-hour display (24 h) – 12-hour display (12 h) Setting the time Use the arrow sensors to set the hours and minutes. The coffee machine – switches on at a particular time, e.g.
Settings The programmed times will, however, remain in memory and will be reactivated after manually switching the machine on again. Switch off at Use the arrow sensors to set the hours and minutes. If you have not used the coffee machine for a long time, the saved times will be reactivated after manually switching the machine on again (see "Switch on at"). Switch off after Eco mode Eco mode is an energy-saving mode.
Settings Locking the coffee machine (System lock 0) You can lock the coffee machine to prevent it being used without your knowledge, by children, for example. Activating and deactivating the system lock 0 When the system lock is activated, the "Switch on at" option for the timer will not work. Overriding the system lock While "To unlock, press OK sensor for 6 seconds" is showing in the display, ^ touch the OK sensor for 6 seconds.
Cleaning and care Quick guide Clean the coffee machine regularly to avoid a build-up of bacteria.
Cleaning and care ,Danger of burning and scalding on hot components or by hot liquids. Always allow the coffee machine to cool down before cleaning it. Caution. Water in the drip tray can be very hot. Do not use a steam cleaner to clean the coffee machine. Steam could cause a short circuit.
Cleaning and care Milk pipework Ensure that all components in which milk is transported are cleaned on a regular basis. Milk naturally contains bacteria that rapidly multiply if the milk pipework is not cleaned properly. Soiling in the appliance may be dangerous to health. Rinsing the milk pipework Milk residue can clog up the milk pipes. If a drink has been made using milk the coffee machine will prompt you to rinse the pipework when you switch the machine off.
Cleaning and care Cleaning the milk pipework with Miele cleaning agent for milk pipework ^ Touch X and select "Maintenance". ^ Select "Clean milk pipework". The cleaning process cannot be cancelled once it has started. The process has to be completed through to the end. ^ Touch OK. The process will start. ^ Follow the instructions given in the display. ^ Place the container next to the machine and hang the milk pipe in the solution. Make sure it is placed sufficiently far into the cleaning solution.
Cleaning and care The central spout with cappuccinatore Clean the central spout cover by hand only using warm water and a little washing-up liquid. All other parts are dishwasher safe. ^ Twist upper section a with the holder for the milk pipework and pull it off. Then pull the Y-shaped piece b off. Release the spouts c. ^ Clean all parts thoroughly. ^ Push the central spout right down and remove the stainless steel cover by pulling it off towards you.
Cleaning and care If the milk pipe is blocked, clean it under running water with the brush supplied. ^ Insert the brush in the tube and move it back and forth as far as it will go until all milk residue has been removed. ^ Fit the dispensing unit back together. ^ Push the dispensing unit back onto the central spout. Press firmly to ensure the spouts at the bottom connect correctly with the edge of the dispenser. ^ Replace the stainless steel cover and connect the milk pipe if applicable.
Cleaning and care Water container Drip tray cover Clean the water container lid by hand only using hot water and a little washing-up liquid. ^ Remove the drip tray cover from the drip tray. Change the water every day to prevent a build-up of bacteria. Make sure that the valve, the underside of the water container and the surface the water container sits on are clean. Otherwise the water container will not sit correctly.
Cleaning and care Drip tray and waste container ^ Push the central spout up as far as it will go. Clean the drip tray and waste container every day to avoid unpleasant smells and mildew. The waste container is located in the drip tray. Water from rinsing also collects in the waste container. A prompt will appear in the display when the drip tray and/or the waste container is full and needs to be emptied. Empty the drip tray and the waste container.
Cleaning and care Bean container and ground coffee chute ,Disconnect the coffee machine from the power supply before cleaning. Tip: Use a vacuum cleaner to remove any coffee residues from the bean container and the ground coffee chute. ^ Open the bean container. ^ Remove any coffee beans. Brew unit ,Disconnect the coffee machine from the power supply before cleaning. Clean the brew unit by hand only using warm water. Do not use washing-up liquid. The moving parts of the brew unit are lubricated.
Cleaning and care If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (See "Problem solving guide"). ^ Push the brew unit back into the coffee machine, making sure it goes in straight. After taking the brew unit out of the machine do not change the position of the brew unit handle, as this would cause the brew unit to be out of alignment and you will not be able to push it back into the coffee machine.
Cleaning and care Degreasing the brew unit Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. Use the cleaning tablets supplied with the coffee machine to clean the brew unit. ^ Follow the instructions given in the display. When "Place a cleaning tablet in the ground coffee chute and close the chute" appears in the display: Degrease the brew unit regularly with the Miele cleaning tables supplied.
Cleaning and care Housing External surfaces may suffer discolouration or damage if soiling is left on them for too long. Remove soiling immediately. Make sure that water cannot get behind the display. All external surfaces are susceptible to scratching and can suffer discolouration if they come into contact with unsuitable cleaning agents. Wipe up any spillages or splashes of descaling agent immediately. ^ Switch the coffee machine off.
Descaling When descaling the machine, cover delicate surfaces and natural flooring to prevent damage from splashes of descaling solution. Ensure that any splashes of descaling solution are wiped up immediately. Limescale builds up in the coffee machine through use. How often the appliance needs to be descaled will depend on the water hardness level in your area. The machine should be descaled regularly to ensure that it functions correctly. The machine will guide you through the descaling process.
Descaling ^ Place 1 descaling tablet in the water. Ensure that you adhere to the mixing ratio for the descaling tablets. It is important that you do not fill the water container with less water than prescribed. The descaling programme will otherwise be cancelled prematurely. ^ Replace the water container. ^ Follow the further instructions given in the display.
Problem solving guide Most problems that occur during daily use can be easily corrected. With the help of the following guide, you will be able to find the causes of problems and rectify them. ,Important! Do not open the outer casing of the machine. Repairs must only be carried out by a Miele approved service technician. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. If you can't remedy the problem yourself, please call Miele.
Problem solving guide Message Possible cause and remedy "Too much ground There is too much ready ground coffee in the ground coffee coffee" chute. If more than one level scoop of ground coffee is added to the coffee chute, the brew unit cannot process the coffee. The ground coffee will be directed into the waste container and the fault message will appear in the display. ^ Switch the machine off with the On/Off - sensor. ^ Remove and clean the brew unit (see "Cleaning and care – Brew unit").
Problem solving guide Message Possible cause and remedy F73 or "Check the brew unit" The brew unit cannot be positioned correctly. ^ Switch the machine off with the On/Off - sensor. ^ Remove and clean the brew unit (see "Cleaning and care – Brew unit"). ^ Push the coffee ejector of the brew unit into the correct position (see diagram). ^ Do not fit the brew unit. Close the front of the machine and switch the machine on with the On/Off - sensor.
Problem solving guide Unusual performance of the coffee machine Problem Possible cause and remedy The lighting remains off after the coffee machine has been switched on. The lighting has been switched off. ^ Switch the lighting on (see "Settings - Lighting"). The display remains dark after the coffee machine has been switched on using the On/Off - sensor. The On/Off - was not touched for long enough. ^ Touch the On/Off - sensor for at least 3 seconds. The lamp is defective. ^ Call Miele Service.
Problem solving guide Problem Possible cause and remedy The coffee machine does not switch itself on, although the "Switch on at" setting has been activated for the timer. The system lock has been activated. ^ You need to deactivate the system lock (see "Settings System lock"). The machine was not used after being switched on automatically three times in succession. ^ Switch the machine on and dispense a drink. The display is The display brightness has been set too low.
Problem solving guide Problem Possible cause and remedy "Empty the drip tray" appears in the display, even though the drip tray is empty. The drip tray is not positioned correctly in the machine. ^ Push the drip tray in as far as it will go. Drink preparation has been cancelled. ^ Make sure the holder for the drip tray cover is correctly located on the drip tray. If the water container becomes empty while a drink is being made, the message "Water container empty.
Problem solving guide Problem Possible cause and remedy Milk is dripping or The level of milk in the milk flask is higher than the central running out of the spout. central spout even ^ Push the central spout up as far as it will go. though no milk is being dispensed. The descaling programme was started by mistake. The descaling programme cannot be stopped once the OK sensor has been touched. Descaling must be continued through to completion.
Problem solving guide Problem Possible cause and remedy After switching the machine a message appears prompting you to empty the drip tray and the waste container even though they are empty. This is not a fault. The drip tray and waste container was probably not emptied after making the last coffee, or the internal counter was not reset. 58 ^ Remove the drip tray and waste container from the machine and empty them.
Problem solving guide Unsatisfactory results Problem Possible cause and remedy The consistency of The milk temperature is too high. Good milk froth can only the milk froth is be achieved when cold milk (below 13°C) is used. unsatisfactory. ^ Check the temperature of the milk. The milk pipework is blocked. ^ Clean the central spout with integrated cappuccinatore and the milk pipework with the cleaning brush.
Problem solving guide Problem Possible cause and remedy The crema on the The grinder setting is not correct. coffee or espresso ^ Set the grinder to a finer or coarser setting (see "Setting is not as it should the coffee grinder"). be. The brewing temperature is too high for this type of coffee. ^ Set a lower brewing temperature (see "Brewing temperature"). The coffee beans are no longer fresh.The coffee beans are stale. ^ Add fresh coffee beans to the coffee bean container.
Transporting the machine If you are not going to use the coffee machine for an extended period of time, e.g. whilst on holiday, or if it needs to be moved, a number of procedures will need be carried out to ensure its safety. Please carry out the following: ,Caution. Danger of burning and scalding from hot steam coming out of the hot water spout. The evaporation process is finished when "Process finished" appears in the display.
After Sales / Guarantee In the event of a fault which you cannot correct yourself, or if the machine is under guarantee please contact: – your Miele Dealer or – Miele Contact details for Miele are given at the end of this booklet. N.B. A call-out charge will be applied to service visits where the problem could have been resolved as described in these instructions. When contacting Miele, please quote the model and serial number of your machine.
Saving energy If the default settings for "Eco mode" or the "Timer" have been altered, energy consumption will increase. The message " This setting uses more energy" will appear in the display. Switch the machine off with the master switch and at the wall socket. If the coffee machine is not going to be used for a longer period of time, e.g. whilst on holiday, switch it off with the master switch and at the wall socket.
Electrical connection All electrical work should be carried out by a suitably qualified and competent person only, in strict accordance with current national and local safety regulations (BS 7671 in the UK). Installation, repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held liable for unauthorised work. Ensure power is not supplied to the machine until after installation work has been carried out.
Installation Please observe the following installation instructions: Danger of overheating. Please ensure that there is adequate ventilation around the machine. Do not cover the machine with tea towels or similar objects whilst it is in use. Danger of overheating. If the coffee machine is installed behind a kitchen furniture door, it may only be used with the furniture door open. Do not close the furniture door while the coffee machine is in use.
Appliance dimensions 66
Technical data Current draw in standby mode (default setting) < 0.5 Watt Pump pressure: max. 15 bar Through-flow heater: 1 stainless steel thermo block Appliance dimensions (W x H x D): 251 x 359 x 427 mm Net weight 9.9 kg Connection cable length: 140 cm Water container capacity: 1.8 l Bean container capacity: 300 g Stainless steel milk flask capacity: 0.5 l Waste container capacity: max.
8QLWHG .LQJGRP -IELE #O ,TD &AIRACRES -ARCHAM 2OAD !BINGDON /XON /8 47 4EL #USTOMER #ONTACT #ENTRE 4EL % MAIL INFO MIELE CO UK )NTERNET WWW MIELE CO UK $XVWUDOLD -IELE !USTRALIA 0TY ,TD !". 'ILBERT 0ARK $RIVE +NOXFIELD 6)# 4EL &AX )NTERNET WWW MIELE COM AU &KLQD -IELE 3HANGHAI 4RADING ,TD &LOOR .
CM 6100 en - GB M.-Nr.