User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the appliance
- Controls and display
- Accessories
- Operating principles
- Before using for the first time
- Water hardness
- Filling the water container
- Filling the coffee bean container
- Switching on and off
- Adjusting the central spout to the correct cup height
- Making drinks
- Grinder setting
- Amount of coffee, brew temperature and pre-brewing
- Portion size
- User profiles
- Settings
- Cleaning and care
- Cleaning intervals - Quick guide
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Waste container, drip tray and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Central spout
- Milk pipework
- Bean container and ground coffee chute
- Cleaning the housing
- Opening the menu
- Rinsing the appliance
- Rinsing the milk pipework
- Cleaning the milk pipework using the maintenance programme
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Transporting the machine
- Problem solving guide
- After sales service and warranty
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Problem solving guide
58
Problem Possible cause and remedy
Too much ground coffee There is too much ground coffee in the coffee chute.
The brew unit cannot compact coffee powder if more
than two level spoonfuls of ground coffee are added
to the coffee chute. The ground coffee will be
emptied into the waste container and the fault
message will appear in the display.
Switch the coffee machine off with the On/Off
sensor.
Remove and clean the brew unit by hand (see
"Cleaning and care - Degreasing the brew unit and
cleaning the interior").
Remove the ground coffee inside the coffee
machine, e.g. with a vacuum cleaner.
Place a maximum of 12g of coffee in the ground
coffee chute.