User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the appliance
- Controls and display
- Accessories
- Operating principles
- Before using for the first time
- Water hardness
- Filling the water container
- Filling the coffee bean container
- Switching on and off
- Adjusting the central spout to the correct cup height
- Making drinks
- Grinder setting
- Amount of coffee, brew temperature and pre-brewing
- Portion size
- User profiles
- Settings
- Cleaning and care
- Cleaning intervals - Quick guide
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Waste container, drip tray and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Central spout
- Milk pipework
- Bean container and ground coffee chute
- Cleaning the housing
- Opening the menu
- Rinsing the appliance
- Rinsing the milk pipework
- Cleaning the milk pipework using the maintenance programme
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Transporting the machine
- Problem solving guide
- After sales service and warranty
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Settings
39
The following will not be reset:
- The number of drinks dispensed
and the appliance status (No. of
portions until appliance needs
descaling,...brew unit needs
degreasing)
- Language
- Profiles and the associated drinks
(CM5410, CM5510, CM5710)
Demo mode (showroom
programme)
Do not activate this setting for
domestic use.
TheShowroom programme function
enables the coffee machine to be
demonstrated in stores or showrooms.
Although the sensor controls and
display seem to be working, the thermo
block is not being heated. The
appliance does not dispense any
drinks, run the maintenance
programmes or save any settings.
You can activate demo mode without
commissioning the appliance for the
first time. The water container is
empty or not inserted. Switch the
coffee machine on. As soon as the Fill
and replace the water container message
appears, touch the sensor for
5seconds. Demo mode is active.