User Manual
Table Of Contents
- Contents
- Warning and Safety instructions
- Guide to the appliance
- Controls and display
- Accessories
- Operating principles
- Before using for the first time
- Water hardness
- Filling the water container
- Filling the coffee bean container
- Switching on and off
- Adjusting the central spout to the correct cup height
- Making drinks
- Grinder setting
- Amount of coffee, brew temperature and pre-brewing
- Portion size
- User profiles
- Settings
- Cleaning and care
- Cleaning intervals - Quick guide
- Cleaning by hand or in the dishwasher
- Unsuitable cleaning agents
- Waste container, drip tray and drip tray cover
- Cleaning the water container
- Removing and cleaning the water container filter
- Central spout
- Milk pipework
- Bean container and ground coffee chute
- Cleaning the housing
- Opening the menu
- Rinsing the appliance
- Rinsing the milk pipework
- Cleaning the milk pipework using the maintenance programme
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Transporting the machine
- Problem solving guide
- After sales service and warranty
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Making drinks
28
Using milk cartons or bottles
The milk tube for cartons and other
suitable containers is located behind
the appliance door.
Connect the milk tube to the aperture
in the central spout.
Place a container with sufficient milk
in it beside the coffee machine.
Place the end of the milk tube in the
container. Make sure that it is
sufficiently immersed in the milk.
Useful tip: The Miele milk flask is the
perfect addition to Miele coffee
machines if you make a lot of coffees
with milk. The milk flask is dishwasher-
safe and easy to store in the fridge after
preparing. Good milk froth can only be
made with cold milk (<10°C).
The milk flask is available to order via
the Miele webshop or directly from
Miele (see the end of this booklet for
contact details).
Making a coffee drink
Place a cup or glass under the central
spout.
Select a drink: touch the sensor
control for the drink you want.
Alternatively, select a drink in the
Other drinks menu (sensor).
Dispensing will start.
Cancelling preparation
To cancel making a drink, touch the
drinks sensor control or the
sensor control for drinks from
Other drinks again.
Preparation will be cancelled.