Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Controls and indicators
- Operation
- Miele@home
- Before first use
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Cup heating
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Drip tray and grounds container
- Cleaning the drip tray cover
- Water container
- Removing and cleaning the water container filter
- Dismantling and cleaning the main dispenser
- Cleaning the steam jet
- Cleaning the milk pipework and rinse valve
- Cleaning the milk siphon
- Cleaning the milk flask
- Bean container and ground coffee chute
- Cleaning the casing
- Accessing the Maintenance menu
- _
- Rinsing the milk pipework
- Cleaning the milk pipework (maintenance program)
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Frequently Asked Questions
- Transport
- Service and warranty
- Accessories
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Parameters
42
Displaying and changing
parameters
You can change the portion size for all
drinks.
In addition, you can set the amount of
coffee, brew temperature, and pre-
brewing parameters for each coffee
drink individually.
Tap and select Parameters.
Select a drink and confirm withOK.
The parameters that can be changed
for this drink are displayed.
Once you have selected a drink, the
current settings for the following
appear: Amount of coffee, Brew
temperature, and Pre-brewing.
The Portion size menu option is
displayed in the first line. If you
select Portion size and confirm
withOK, the drink will be dispensed
immediately.
Select the parameter you want.
Change the setting as required and
confirm withOK.
The setting is now saved.
Portion size
The flavor of the coffee produced
depends not only on the type of coffee,
but also on the amount of water used.
You can program the amount of water
for all drinks (apart from the Coffee Pot
function) to suit the size of your cups
and/or the type of coffee you are using.
For coffee drinks that use milk, you can
also set the amount of milk or milk froth
to be dispensed with these drinks, as
well as the amount of coffee or
espresso.
A maximum portion size can be
programmed for each type of drink.
Dispensing stops once this has been
reached. The maximum possible
portion size is then saved by the
appliance for this type of drink.
If the water container becomes empty
while making a drink, the coffee
machine will stop programming the
portion size. The portion size will not
be saved.
Changing the portion size
Place a cup under the main
dispenser.
Select Portion size and confirm
withOK.
The desired drink will be made and Save
will appear in the display.
When the container is filled to the
desired level, tapOK.
If you want to change the portion size
for coffee with milk, the ingredients of
the drink are saved one after the other
during preparation.
When the quantity for each ingredient
reaches the desired level, tapOK.
The programmed portion size will now
be dispensed every time that particular
drink is selected.