Operating Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Machine description
- Controls and indicators
- Operation
- Miele@home
- Before first use
- Filling the water tank
- Filling the coffee bean container
- Switching on and off
- Cup heating
- Adjusting the coffee dispensers to the cup height
- Preparing beverages
- Expert Mode
- Grinder setting
- Parameters
- Profiles
- MobileStart
- Settings
- Cleaning and care
- Overview of cleaning intervals
- Clean by hand or in dishwasher
- Unsuitable cleaning agents
- Drip tray and grounds container
- Cleaning the drip tray cover
- Water container
- Removing and cleaning the water container filter
- Dismantling and cleaning the main dispenser
- Cleaning the steam jet
- Cleaning the milk pipework and rinse valve
- Cleaning the milk siphon
- Cleaning the milk flask
- Bean container and ground coffee chute
- Cleaning the casing
- Accessing the Maintenance menu
- _
- Rinsing the milk pipework
- Cleaning the milk pipework (maintenance program)
- Degreasing the brew unit and cleaning the interior
- Descaling the appliance
- Frequently Asked Questions
- Transport
- Service and warranty
- Accessories
- Saving energy
- Electrical connection
- Installation
- Appliance dimensions
- Technical data
Preparing beverages
32
Milk preparation
Milk or milk alternatives (e.g., soy
milk) containing added sugar can
clog up the milk pipe and the rest of
the milk pipework. Residues from
unsuitable liquids can interfere with
milk preparation.
The milk used must not contain any
additives.
Only use pasteurized cow's milk.
If you have not made any milk drinks
for a while, rinse the milk pipework
thoroughly before making the first
drink.
Tip: Using cold cow's milk
(<50°F/10°C) with a protein content of
at least 3% will produce the perfect
milk froth.
You can select milk with a fat content
according to your personal preference.
With whole milk (at least3.5% fat), the
milk froth will be slightly creamier than
with low-fat milk.
You can prepare milk with the milk
siphon or milk flask (included,
depending on the model).
There is one connecting piece
(included) which can be inserted either
into the milk siphon or into the milk
flask lid.
The appliance is supplied with the
connecting piece either enclosed
separately or inserted into the milk flask
lid (depending on the model). The
connecting piece is easy to push out
from the inside of the milk flask lid.
The “seam” on the milk pipework and
on the main dispenser makes it easier
to assemble it correctly.