Operating and Installation Instructions Fridge-freezer Combination To prevent accidents and machine damage, read these instructions before installation or use. en - US, CA M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS ................................................................ 5 Caring for the environment ................................................................................ 13 How to save energy............................................................................................. 14 Guide to the appliance ........................................................................................ 16 Control panel ...................................................
Contents Changing the size of the ice cubes ....................................................................... 32 Storing food in the refrigerator section............................................................. Different storage zones ......................................................................................... Food which is not suitable for storage in the refrigerator section ......................... Notes on buying food................................................................
Contents Causes of noises ................................................................................................. 64 Technical Service................................................................................................. 65 Contact in case of fault ......................................................................................... 65 Warranty ................................................................................................................ 65 Water connection .......
IMPORTANT SAFETY INSTRUCTIONS This appliance complies with all statutory safety requirements. Please note that inappropriate use can lead to personal injury and damage to property. To avoid the risk of accidents and damage to the appliance, please read these instructions carefully before using it for the first time. They contain important notes on installation, safety, use and maintenance. Miele cannot be held liable for non-compliance with these instructions.
IMPORTANT SAFETY INSTRUCTIONS This appliance is not suitable for storing and keeping cool medicines, blood plasma, laboratory preparations or other such materials or products. Incorrect use of the appliance for such purposes can cause deterioration of the items stored. The appliance is not suitable for use in areas where there is a risk of explosion. Miele cannot be held liable for damage resulting from improper or incorrect use of the appliance.
IMPORTANT SAFETY INSTRUCTIONS Technical safety The refrigerant system is tested for leaks. This appliance complies with statutory safety requirements. This appliance contains the refrigerant Isobutane (R600a), a natural gas which is environmentally friendly. Although it is combustible, it does not damage the ozone layer and does not increase the greenhouse effect. The use of this refrigerant has, however, led to a slight increase in the noise level of the appliance.
IMPORTANT SAFETY INSTRUCTIONS The electrical safety of the appliance can only be guaranteed when correctly grounded. It is essential that this standard safety requirement is met. If in any doubt please have the electrical installation tested by a qualified electrician. Reliable and safe operation of this appliance can only be assured if it has been connected to the electricity supply.
IMPORTANT SAFETY INSTRUCTIONS Unauthorized installation, maintenance, and repairs, or a faulty fresh water connection can cause considerable danger for the user. Installation, maintenance, and repairs, installation work on the fresh water connection, and all repairs on the ice/water outlet must only ever be carried out by a Miele authorized technician. The ice cube maker must only be connected to a cold water line.
IMPORTANT SAFETY INSTRUCTIONS Do not operate any electrical equipment (e.g. an electric ice cream maker) inside the appliance. DANGER of sparking and explosion. Do not store cans or bottles containing carbonated drinks or liquids which could freeze in the freezer section. The cans or bottles could burst, causing injury or damage. Never handle frozen food or the metal parts of the appliance with wet hands. Your hands may freeze to the frozen food or to the metal.
IMPORTANT SAFETY INSTRUCTIONS Cleaning and maintenance Do not use any oil or grease on the door seals. They can cause the seals to deteriorate over time. Never use a steam cleaner to clean the appliance. The steam can reach the electrical components and cause a short circuit. Sharp edged or pointed objects will damage the evaporator, causing irreversible damage to the appliance. Do not use sharp edged or pointed objects to – remove frost or ice, – separate frozen foods or remove ice trays.
IMPORTANT SAFETY INSTRUCTIONS DANGER of electric shock! – Cut the plug off the power cord. – Cut the power cord off the old appliance. Dispose of them separately from the appliance. Ensure that the appliance is not stored in the vicinity of gasoline or inflammable gases and liquids during and after disposal. Make sure that the coolant pipework is not damaged during disposal to avoid uncontrolled leakage of oil and coolant (see data plate for coolant type).
Caring for the environment Disposal of packaging material Disposal of your old appliance The packaging is designed to protect the appliance from damage during transportation. The packaging materials used are selected from materials which are environmentally friendly for disposal and should be recycled. Electrical and electronic appliances contain valuable materials.
How to save energy Installation/Maintenance Temperature setting Normal energy consumption Increased energy consumption In a well-ventilated room. In an enclosed, poorly ventilated room. Protected from direct sunlight. In direct sunlight. Away from heat sources (radiator, range/oven). Near a heat source (radiator, oven). Where the ideal room temperature is approx. 68°F (20°C). Where the ambient room temperature is above 77°F (25°C). Ventilation gaps unobstructed and dusted regularly.
How to save energy Normal energy consumption Use Increased energy consumption The drawers, and shelves are arranged as they were when the appliance was delivered. Only open the door when necessary and for as short a time as possible. Store food in an organized way. Frequent opening of the door for long periods will cause a loss of coldness. The appliance will try to cool down and the compressor will run for longer periods.
Guide to the appliance Control panel Sensor buttons for the refrigerator section settings area f Display LEDs (see “Display LEDs” table for explanation) a For turning the ice cube maker on and off g Display with temperatures and symbols (symbols only visible during use; see “Symbols on the display” table b For turning the Automatic SuperCool for explanation) function on and off c For turning the refrigerator section on Sensor buttons for the freezer section settings area and off h For setting the temper
Guide to the appliance Display LEDs and symbols on the display Display LED Meaning Automatic SuperCool (left)/SuperFrost (right) The function can be selected depending on the section (see “Using Automatic SuperCool and SuperFrost”).
Guide to the appliance a Control panel with display b Fan c Interior lighting d Bottle rack e Egg tray/door shelf f Holder with carbon filter (Active AirClean) g Adjustable shelf h Fruit and vegetable drawers i Bottle shelf with bottle holder j NoFrost module k Ice cube drawer with automatic ice cube maker l Freezer drawers For easier installation, there are transport handles on the back at the top of the machine and transport wheels underneath.
Accessories Accessories supplied Bottle holder Egg tray Butter dish Attach the bottle holder to the bottle shelf. Bottle rack The bottle holder can be moved left or right. This way you can be sure that the bottles will be more secure when the appliance door is opened and closed. KKF-FF carbon filter with holder (Active AirClean) Bottles can be stored horizontally in the refrigerator section using the bottle rack to save space.
Accessories Cool pack Optional accessories A range of useful Miele accessories and care products are available for your appliance. KKF-RF Active AirClean replacement filters The cool pack prevents the temperature in the freezer rising too quickly in the event of a power outage. This can help prolong the storage time. Replacement filters to fit the Active AirClean holder are available. We recommend replacing the carbon filters every 6 months.
Before first use Before first use Packaging material Remove all packaging material from the inside of the appliance. Removing the protective film The stainless steel strips on the door shelves and adjustable shelves have a layer of protective film to prevent damage during transportation. The machine doors, and side panels where applicable, have a layer of protective film too. Do not remove the protective film until the machine has been installed in its final location.
Switching on and off Operating the machine A light touch of the finger on the sensor buttons is all that is required to operate this machine. Switching on the refrigerator The Freezer Zone and the Fridge Zone can be switched on at the same time using the two On/Off buttons. To enable the temperature to get sufficiently cold inside the refrigerator, allow it to run for approx. 3–5 hours (depending on the ambient temperature) before placing food in it.
Switching on and off Switching off the entire appliance Turning off for longer periods of time Touch the right-hand On/Off button until all of the displays go off. If you go away for a prolonged If this does not work, the safety lock is activated (see “Selecting additional settings – Activating and deactivating the safety lock”). The refrigerator section interior lighting will go out and the cooling process will be turned off.
The correct temperature It is very important to set the correct temperature for storing food in the appliance. Bacteria will cause food which is not stored at the correct temperature to deteriorate rapidly. Temperature influences the growth rate of these bacteria. Reducing the temperature reduces their growth rate. ... in the refrigerator section We recommend a temperature of 39°F (4°C) in the refrigerator section.
The correct temperature Temperature display In normal operation, the upper temperature display shows the current average refrigerator section temperature and the lower temperature display shows the highest freezer section temperature currently being recorded within the machine. Depending on the ambient temperature and the temperature setting, it can take the machine a few hours to reach the temperature required and for this temperature to then be shown as a constant temperature on the display.
Using Automatic SuperCool and SuperFreeze The following functions are available depending on the section: – Refrigerator section Automatic SuperCool – Freezer section SuperFrost SuperFrost function For best results, turn on the SuperFrost function before putting fresh food into the freezer. Fresh food will be frozen quickly, so that the nutritional value, vitamin content, appearance, and taste are maintained. Exceptions: – Placing food in the freezer that is already frozen. – Only freezing up to 4.
Using Automatic SuperCool and SuperFreeze Turning a function on or off Touch the sensor button for the function you want. – The display LED next to the corresponding symbol will light up and the function will be turned on. – The display LED next to the corresponding symbol will go out and the function will be turned off. After a power failure, any function that was previously turned on will be turned off.
Temperature and door alarm Your machine is equipped with a warning system to ensure that temperature increases in the freezer section do not go unnoticed and it also prevents energy from being wasted when machine doors are left open. Temperature alarm An alarm will sound if the temperature in the freezer section becomes too warm. The display LED flashes.
Selecting additional settings Selecting additional settings Settings overview In Settings mode, certain settings can be adjusted and functions selected, allowing you to adjust the machine to suit your requirements. Turning Sabbath mode on and off Setting the display brightness See the following pages for more information on these settings.
Selecting additional settings Ensure that the appliance doors are properly closed, as audio and visual alarms are turned off. Any power failure during this time will not be shown on the display. After a power failure, the appliance will start up in Sabbath mode. Danger of food contamination! Any power failure during Sabbath mode will not be shown on the display. After a power failure, the appliance will restart in Sabbath mode.
Selecting additional settings Changing the temperature unit (°F/°C) Activating and deactivating the safety lock The temperature can be displayed in either Fahrenheit (°F) or Celsius (°C). The safety lock can be activated to prevent the appliance being switched off by mistake. Touch the SuperFrost button to the right-hand side of the display for approx. 5 seconds. MENU lights up on the display and flashes. Settings mode has now been activated.
Selecting additional settings Changing the size of the ice cubes MENU lights up on the display and flashes. The size of the ice cubes depends on the quantity of water being taken in. You are able to set this quantity according to your wishes. To make larger ice cubes, increase the amount of water being taken in by the ice cube maker. Touch the On/Off button to exit Settings mode. The amount of water is set to (medium) at the factory.
Storing food in the refrigerator section Do not load more than a maximum of 35 lb (16 kg) of food in the appliance door. Risk of fire from electrical appliances. Operating electrical devices in the appliance can cause sparks to form. Do not operate any electrical devices inside the appliance. Risk of explosion due to flammable mixes of gases. Electrical components can cause flammable mixes of gases to ignite. Do not store any explosive materials or products containing flammable propellants (e.g.
Storing food in the refrigerator section Coldest area The coldest area in the refrigerator section is directly above the fruit and vegetable drawers and at the back. Use these areas to store all delicate and highly perishable food, e.g.
Storing food in the refrigerator section Notes on buying food Storing food correctly The freshness of food when first placed in the appliance is an important factor in determining how long it stays fresh, and how long it can be kept in the appliance. Take into account the use-by date and the correct storage temperature. Time out of the refrigerator, e.g., transporting food in a warm car, should be kept to a minimum. Ensure that food stored in the refrigerator section is in packaging or covered properly.
Adjusting the interior fittings (refrigerator section) Moving the adjustable shelves Adjusting the bottle rack The shelves can be adjusted according to the height of the food. The bottle rack can be placed at different positions in the appliance. Lift the shelf slightly at the front, pull it forward a little, lift the recess over the shelf supports, and move the shelf up or down.
Adjusting the interior fittings (refrigerator section) Removing fruit and vegetable drawers on rollers The fruit and vegetable drawers are on rollers and can be fully pulled out for filling and emptying. Adjusting the door shelf/bottle shelf Danger of injury! Only move the door shelves/bottle shelves in the door when they are empty. Lift the clip-in container up and out of the stainless steel frame to remove. Push the stainless steel frame up and remove it by pulling it forward.
Adjusting the interior fittings (refrigerator section) Adjusting the bottle holder Moving the carbon filter The bottle holder can be moved left or right. This way you can be sure that the bottles will be more secure when the machine door is opened and closed. When you are storing very strongsmelling food (e.g., cheese): The bottle holder can be removed completely, for example for cleaning. To do this, push the front edge of the bottle holder up and disengage it.
Freezing and storing food Always observe USDA food safety guidelines. reabsorb it during the defrosting process, and very little water collects around the defrosted food. Risk of fire from electrical appli- Storing frozen food ances. Operating electrical devices in the appliance can cause sparks to form. Do not operate any electrical devices inside the appliance.
Freezing and storing food Home freezing Only freeze food that is fresh and in good condition. Tips for home freezing – The following types of food are suitable for home freezing: fresh meat, poultry, game, fish, vegetables, herbs, fresh fruit, dairy products, baked goods, leftovers, egg yolks, egg whites, and a range of precooked meals. – The following types of food are not suitable for freezing: lettuce, radishes, sour cream, mayonnaise, whole eggs in their shells, onions, whole raw apples and pears.
Freezing and storing food Before placing food in the freezer When freezing more than 4.4 lbs (2 kg) of fresh food, turn on the SuperFrost function for some time before placing the food in the freezer (see “Using SuperFrost, Automatic SuperCool, and DynaCool – SuperFrost function”). This helps food which is already stored in the freezer to stay frozen. Placing food in the freezer The following maximum loads must not be exceeded: – freezer drawer = 55.1 lbs (25 kg) – glass plate = 77.
Freezing and storing food Storage time for frozen food The storage life of food is very variable, even at a constant temperature of 0°F (-18°C). Decomposition processes also take place in frozen food, albeit at a very reduced speed. Fat can become rancid from contact with oxygen in the air, for example. This is why lean meat can be stored approx. twice as long as fatty meat. The storage times quoted are guide values for the storage life of different food groups in the Freezer Zone.
Freezing and storing food Cooling drinks quickly Using accessories Risk of injury from broken glass! Using the cool pack Bottles and cans of drinks, particularly carbonated drinks, can burst when frozen. Do not freeze any drinks in bottles or cans. The cool pack prevents the temperature in the freezer zone from rising too quickly in the event of a power outage. This can help prolong the storage life.
Making ice cubes For the automatic ice maker to operate, it must be connected to a water supply (see “Water connection”). CAUTION The first three batches of ice cubes made after the ice maker is started up must not be consumed, as the water will have been used for the initial rinse through the water supply line. This applies to the initial commissioning as well as when using the appliance again after it has been turned off for a long while.
Making ice cubes Making a large quantity of ice cubes Changing the size of the ice cubes The amount of ice cubes made by the machine depends on the temperature in the freezer section. The lower the temperature, the more ice cubes are produced within a given time. With a set temperature of 0°F (-18°C), around 100– 120 ice cubes will be produced within 24 hours. The size of the ice cubes depends on the quantity of water being taken in. You are able to set this quantity according to your wishes.
Making ice cubes Turning off the ice cube maker The ice cube maker can be turned off independently of the freezer section if you do not want to make any ice cubes. Tip: If the ice cube maker is turned off, the ice cube drawer can be used as an extra drawer for freezing fresh food and storing frozen food. Touch the sensor button for turning the ice cube maker on and off so that the display LED goes out.
Defrosting WARNING! DANGER of injury Freezer Zone and damage! Do not use any mechanical or other types of aids which are not recommended by the manufacturer to accelerate the defrosting process. The appliance is equipped with a “NoFrost” system. The freezer defrosts automatically. Refrigerator section The refrigerator defrosts automatically. Condensate and frost can build-up on the back wall of the refrigerator when the compressor is running. There is no need to remove it.
Cleaning and care WARNING! DANGER of electric shock! Unplug the appliance or trip the circuit breaker. WARNING! Fire hazard! Do not damage the coolant pipework. Do not let water get into the electronic unit or the lighting. Steam from a steam cleaning appliance could reach the electrical components and cause a short circuit. Do not use a steam cleaner! Cleaning water must not get into the drain hole. The data plate located inside the appliance must not be removed.
Cleaning and care We recommend treating the stainless steel surfaces of the refrigerator with the Miele stainless steel conditioning agent (see “Optional accessories”). This product contains substances that are gentle to stainless steel surfaces and, unlike stainless steel cleaners, it does not contain polishing agents. Soiling is gently removed and each time the Miele stainless steel conditioning agent is used, it forms a protective film against dirt and water.
Cleaning and care Dismantling an adjustable shelf Before cleaning the adjustable shelf, remove the white protective strip at the back of the shelf. Proceed as follows: Place the shelf on a worktop covered with a soft material (e.g., a tea towel). Cleaning the interior and accessories Clean the appliance at least once a month. Clean up any spills, stains or food immediately. Do not allow them to dry and stick to the appliance.
Cleaning and care The following parts can be cleaned in the dishwasher: The maximum temperature of the dishwasher program selected must not exceed 131°F (55°C). Contact with natural dyes from carrots, tomatoes, and ketchup, etc. may discolor the plastic parts in the dishwasher. This discoloration does not affect the stability of the parts.
Cleaning and care Appliance front The appliance front has a special highquality finish (Clean Touch Steel). This is resistant to soiling and is very easy to clean. Do not use stainless steel cleaning agent on these surfaces, as it will damage the finish. Do not use Miele stainless steel conditioning agent on these surfaces, as it will cause noticeable smearing.
Cleaning and care Replacing the carbon filters Replace the carbon filters in the holder around every 6 months. Replacement KKF-RF carbon filters can be obtained from the Miele Technical Service, from your dealer, or from Miele's website. Tip: The carbon filter holder is dishwasher safe. Pull the carbon filter holder upward to remove it from the adjustable shelf. Remove both carbon filters and place the new filters with the surrounding edge pointing downward in the holder.
Frequently Asked Questions With the help of the following guide minor faults in the performance of the machine, some of which may result from incorrect operation, can be remedied without contacting the Service Department. This guide may help you to find the reason for the fault, and how to correct it. To prevent cold from escaping, open the appliance doors as little as possible until the fault has been corrected.
Frequently Asked Questions Problem Possible cause and solution After a while, the temperature will return to normal by itself. If a thick layer of ice has already formed, this will affect cooling and increase energy consumption. Defrost the machine and clean it. The ambient temperature is too high. The higher the ambient temperature, the longer the compressor has to run. See the information in the section on “Installation – Installation location”. The temperature setting is too low.
Frequently Asked Questions Problem Possible cause and solution Ice or condensation has The door seal has come out of its groove. built up inside the appli- Check that the door seal is correctly positioned in ance. the groove. The door seal is damaged. Check whether the door seal is damaged.
Frequently Asked Questions Messages in the display Message Possible cause and solution DEMO is shown on the display. The machine does not get cold, but the machine controls are working. Demo mode is activated. This allows the machine to be presented in the showroom without the cooling system being turned on. Do not activate this setting for domestic use. Contact the Service department.
Frequently Asked Questions Message Possible cause and solution The display LED is lit up and an alarm is also sounding. The temperature alarm has been activated (see also “Temperature and door alarm”). The temperature in the freezer section has risen above or fallen below the temperature set. This could be due to, e.g.
Frequently Asked Questions Message Possible cause and solution The display LED is lit up and an alarm is also sounding. The temperature display for the freezer section is flashing. There is a power failure: The temperature in the appliance over the last few days or hours has risen too high because of a power failure or interruption to the power supply. The appliance will go back to the last temperature setting when the power is back on. Touch the sensor button.
Frequently Asked Questions Problems with the ice cube maker Problem Possible cause and solution You cannot turn the ice cube maker on. The appliance is not connected to the power supply or is not switched on. Reconnect to the power supply and switch the appliance back on. The ice cube maker is not producing any ice cubes. The machine and/or the ice cube maker is not turned on. Turn on the machine and/or the ice cube maker. The drawer of the ice cube maker is not closed properly.
Frequently Asked Questions Problem Possible cause and solution The ice cube maker is producing only small ice cubes. Several household appliances connected to the fresh water supply are in operation, which has reduced the amount of water being taken in. Avoid using the dishwasher, washing machine, etc. at the same time. The size of the ice cubes depends on the quantity of water being taken in. You are able to set this quantity according to your wishes.
Frequently Asked Questions The interior lighting is not working. Problem Possible cause and solution The interior lighting is not working. The machine has not been turned on. Turn the machine on. Sabbath mode is turned on: The temperature display is out and is shown on the display. You can turn Sabbath mode off at any time (see “Selecting additional settings – Turning Sabbath mode on and off”). To avoid overheating, the interior lighting turns itself off automatically after approx.
Frequently Asked Questions Other problems Problem Possible cause and solution Food has frozen together or to the wall. The food packaging was not dry when loaded in the freezer. Use a blunt instrument (such as a spoon handle) to carefully pry them apart. The external walls of the appliance feel warm. This is not a fault. The warmth created by the evaporator is used to prevent condensation.
Causes of noises Normal noises Cause Brrrrr... A humming noise is made by the motor (compressor). This noise can get louder for brief periods when the motor switches on. Blub, blub... A gurgling noise can be heard when the coolant circulates through the pipes. Click... Clicking sounds occur whenever the thermostat switches the motor on or off. Sssrrrrr... You can sometimes just hear the sound of the fan inside the appliance. Crack...
Technical Service Contact in case of fault In the event of a fault which you cannot remedy yourself, please contact your Miele dealer or Miele Technical Service. Contact information for Miele Technical Service can be found at the end of this document. Please quote the model and serial number of your appliance when contacting Miele. Both pieces of information can be found on the data plate. You will find the data plate inside your appliance.
Water connection Information on the fresh water connection The appliance is only suitable for connection to a cold water supply, which The machine may only be connected to the fresh water supply by qualified technicians. – is directly connected to the water supply in order to ensure a circulation of the water in the cold water line. Disconnect the machine from the power supply before connecting it to the fresh water supply. Avoid using a water line in which the water is allowed to pool.
Water connection Connecting the water supply line Before establishing the fresh water connection, ensure that the machine is disconnected from the power supply. Before the cold water line is used for the first time, it must be vented by a suitably qualified plumber. The fresh water connection is at the back of the machine, at the bottom. The connection parts included with the machine permit the connection of various water lines (water line not supplied).
Water connection Insert the water filter with the depression facing downward toward the adapter . Risk of damage! Do not overtighten the union nut, as this can cause damage. Connect the union nut to the solenoid valve , and tighten it. If you want to divert the water line by 90°, screw on the elbow . In case of a 1/4" water line: Connect the water line (e.g., copper) to the adapter or elbow using the clamping ring and nut .
Electrical connection Danger of electric shock! The appliance must only be switched on when it has been installed in accordance with the installation instructions. Ground the appliance. The appliance must not be grounded via a gas pipe. If in doubt, have a suitably qualified and experienced electrician check that the installation complies with relevant regulations. Do not install a fuse into neutral current or grounding electrical circuit. Do not use extension cords or ungrounded (two prong) adapters.
Electrical connection The outlet must be easily accessible in an emergency so that the appliance can be quickly disconnected from the electrical supply in case of an emergency. The socket must be located so that the upper edge is a maximum 82" (2100 mm) distance from the upper edge of the base of the kitchen cabinet. If the outlet is no longer accessible once the appliance has been installed, an all-pole disconnect device with a contact opening of at least 1/8" (3 mm) must be present on site.
Installation Fire hazard and risk of damage! Installation location Appliances which give off heat, such as toasters, mini-ovens, or double burner hobs, can catch fire. Do not place them on top of this appliance. This appliance should be installed in a dry, well-ventilated room. Fire hazard and risk of damage! Do not place any open flame, such as a candle, on or next to this appliance. WARNING! An appliance that has not been secured may tip forward.
Installation Climate class Installing the appliance The appliance is designed for use within a certain climate range (ambient temperatures) and should not be used outside this range. The climate range of the appliance is stated on the data plate inside the appliance.
Installation Fitting the anti-tip device Danger of injury! Due to the sheer size and weight of the appliance, it needs to be ensured that it cannot tip forward when the door is open and fully stocked. Set up the appliance with the supplied anti-tip devices as described below. Caution! The water line or power supply could get damaged. Please ensure that neither the water line nor the power supply are located in this area, as these could be damaged during installation e.g., by screws.
Installation Prepare the refrigerator for installation as close as possible to its intended installation location. Release the power cord from the back of the appliance. 3/ " 16 (5) Remove any cord clips from the back of the appliance. Connect the refrigerator to the household water supply as described in the section on “Water connection”. Connect the refrigerator to the power supply as described in the section on “Electrical connection”.
Installation Installing the appliance in a run of kitchen units If the ventilation gaps are not left unobstructed, the compressor will turn on more often and will run for longer periods. This causes higher energy consumption and an increased compressor operating temperature, which can result in damage to the compressor. Do not block the ventilation gaps.
Installation 9 Appliance dimensions 76
Installation KFN 13923 DE edt/cs A [in (mm)] B [in (mm)] C [in (mm)] 78 3/4" (2000) 79 3/16" (2012) 79 1/2" (2020) * When the gap between the back of the appliance and the wall is less than 2 " (51 mm), the energy consumption will increase. Please note that a spacer will be required if anti-tip devices are installed.
Changing the door hinges The machine is supplied with right-hand hinging. If left-hand hinging is required, the hinges must be changed. Removing the door handles Always change the door hinging with the assistance of another person. If the door seal is damaged, the machine door may not close properly and cooling performance will be reduced. Condensation will form in the inside and this can cause a build-up of ice. Do not damage the door seal.
Changing the door hinges Removing the upper soft-close mechanism Open the upper machine door. If the door seal is damaged, the machine door may not close properly and cooling performance will be reduced. Condensation will form in the inside and this can cause a build-up of ice. Do not damage the door seal. Push the panel toward the machine and leave it hanging there between the door and machine to start with.
Changing the door hinges Push the pin up and out from below using a flat-headed screwdriver. Remove the cover . Now the soft-close mechanism and the machine are no longer connected. Remove the panel . Push the soft-close mechanism bracket as far as it will go toward the handle side. Loosen the screw in the soft-close mechanism and spacer. Lever out the casing together with the soft-close mechanism using a flatheaded screwdriver in the middle.
Changing the door hinges Removing the upper appliance door Danger of injury when removing the upper appliance door! As soon as the hinge pin is located in the upper appliance door rather than in the middle hinge plate, the lower appliance door is not secure and could fall off. Ensure that the hinge pin remains located in the middle hinge plate and in the lower appliance door. Carefully lift the upper appliance door up and off, and put it to one side.
Changing the door hinges Removing the lower soft-close mechanism Open the lower appliance door. If the door seal is damaged, the appliance door may not close properly and cooling performance will be reduced. Condensation will form in the inside and this can cause a build-up of ice. Do not damage the door seal. Push the panel toward the appliance and leave it hanging there between the door and appliance to start with.
Changing the door hinges Tip the appliance back slightly, with the help of another person if required. Push the pin up and out from below. Now the soft-close mechanism and the appliance are no longer connected. Remove the panel . Push the soft-close mechanism bracket as far as it will go toward the handle side. Loosen the screw in the soft-close mechanism and spacer. Lever out the casing together with the soft-close mechanism using a flatheaded screwdriver in the middle.
Changing the door hinges Removing the lower appliance door Attach the cover on the opposite side. Close the lower appliance door. Danger of injury when removing the lower appliance door! As soon as the hinge pin has been removed from the lower appliance door in the following instructions, the door is no longer secure. The appliance door must be held by a second person. Lift the plugs for the two appliance doors out of the door bushing and reinsert them on the opposite side.
Changing the door hinges Refitting the lower appliance door Important! Screw the adjustable foot into the hinge pin as far as it will go. Reinsert the hinge pin complete with washer and adjustable foot . Important! The lug on the hinge pin must point to the back again. Place the lower appliance door on the hinge pin from above. Close the lower appliance door. Pull the hinge pin complete with washer and adjustable foot upward to remove. Remove the plug .
Changing the door hinges Inserting the lower soft-close mechanism Remove the cover from the panel , turn it 180°, and reinsert it on the other side. Use the screw to secure the spacer and soft-close mechanism in place. Attach the panel onto the softclose mechanism bracket . Hook the spacer into the latch (A) on the handle side. Hook the soft-close mechanism into the latch (B) on the appliance side. Push both parts out so that they are firmly engaged.
Changing the door hinges Refitting the upper appliance door Fit the upper appliance door onto the hinge pin in the middle of the appliance. Close the upper appliance door. 0 Replace the panel onto the softclose mechanism from above, clicking it back into place first at the bottom and then at the top. 2 3 Close the lower appliance door. Fit the hinge plate on the opposite side and secure it in place using the screws . Tip: Drill the holes for the screws.
Changing the door hinges Inserting the upper soft-close mechanism Remove the cover from the panel , turn it 180°, and reinsert it on the other side. Use the screw to secure the spacer and soft-close mechanism in place. Attach the panel onto the softclose mechanism bracket . Hook the spacer into the latch (A) on the handle side. Hook the soft-close mechanism into the latch (B) on the machine side. Push both parts out so that they are firmly engaged.
Changing the door hinges Firmly tighten all 4 screws . From the appliance side, slide the sidebar into the guide on the mounting plate until you hear it click into place. Replace the panel onto the softclose mechanism from above, clicking it back into place first at the bottom and then at the top. Make sure that the sidebar does not come into contact with the door seal when the door is opened. This would cause permanent damage to the door seal. Close the upper machine door.
Aligning the machine doors The machine doors can be aligned with the machine casing after they have been fitted. To align the upper machine door, use the outer slots in the middle hinge plate: In the following illustration, the machine door is not shown in the closed position to make it easier to see what you have to do. To align the lower machine door, use the outer slots in the lower hinge plate: Slightly loosen both screws . Align the machine door by sliding the hinge plate to the left or right.
Please have the model and serial number of your appliance available when contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com International Headquarters Miele & Cie.
KFN 13923 DE edt/cs en - US, CA M.-Nr.
