FNS37492iE us Product Manual

^ Remove the screws d completely.
^ Place the mounting bracket g on the
opposite side and loosely screw in
the screws d.
^ Remove screws e completely and
loosely screw them in on the opposite
side.
^
If you had inserted pins into the
hinges to limit the door's opening
angle: remove the pins upwards out
of the hinges.
Unscrew the door closing dampers
Attention! When removed from the
unit, the soft-close mechanism
snaps shut. Risk of injury!
^
Place the door with the outer side
downwards on a stable surface.
^ Remove the soft-close mechanism h
from the ball joint.
^ Unscrew the mount i and pull the
soft-close mechanism h towards you
to remove it.
^
Using a screwdriver, remove the ball
joint j and screw it into the adjacent
hole.
Changing the door hinging
74