Operating and Installation Instructions Coffee System To prevent accidents and appliance damage read these instructions before installation or use. en - US, CA M.-Nr.
Contents IMPORTANT SAFETY INSTRUCTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Guide to the coffee system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 First steps to use . . . . . . . . . . . . . . . .
Contents Editing drinks for a profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Creating a drink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 Changing a drink: Changing the portion size, drink parameters and name . . . . . . 37 Deleting a drink . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 MyMiele . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents Cleaning and care . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Rinsing the system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Milk pipework . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances basic safety precautions should always be followed, including the following: Read all instructions before installation or use of the coffee system. Children in the household Please read these instructions carefully to prevent accidents and machine damage. This appliance complies with current safety requirements. Improper use of the appliance can cause personal injury and material damage.
IMPORTANT SAFETY INSTRUCTIONS Technical safety ~ Installation work and repairs must only be performed by a trained technician in accordance with national and local safety regulations. Repairs and other work by unauthorized persons could be dangerous and may void the warranty. ~ A damaged coffee system can be dangerous. Before installing the coffee machine, check for externally visible damage. Do not operate a damaged unit.
IMPORTANT SAFETY INSTRUCTIONS ~ Never open the outer casing of the appliance. Tampering with electrical connections or components and mechanical parts is dangerous and may cause machine damage. ~ Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or has been damaged in any manner. Contact Miele. ~ Always attach the cord to the appliance first, then plug it into the wall outlet. To disconnect, turn the machine off, then remove the plug from the wall outlet.
IMPORTANT SAFETY INSTRUCTIONS ~ Please note the following regarding water: – Only fill the water container with cold, fresh tap water. Hot water or other liquids can damage the coffee machine. – Change the water every day to prevent a build-up of bacteria. – Do not use mineral water. Mineral water will cause serious lime scale deposits to build up in your coffee machine and damage it. – Do not use water from reverse osmosis units. The machine could be damaged.
IMPORTANT SAFETY INSTRUCTIONS – Descale the coffee machine regularly with the appropriate number of Miele descaling tablets for the water hardness level in your area. Descale the machine more frequently in areas with very hard water. – Degrease the brew unit regularly with the supplied Miele cleaning tablets. Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. ~ The main dispenser connector cap is lubricated with silicone grease.
Guide to the coffee system Front view a On/Off K sensor b Touch display c "Back" sensor d Door handle e Hot water dispenser f Drip tray g Main dispenser, with automatic height-adjustment and lighting h Milk container with lid 10
Guide to the coffee system Interior view i Ground coffee chute cover j Brew unit k Ground coffee chute l Grind control slide m Coffee bean container n Water container o Drip tray p Waste unitr q Drip catcher r Main dispenser connector s Service cover 11
Accessories Included accessories Optional accessories – Coffee scoop for measuring ground coffee Miele offers a range of useful accessories, as well as cleaning and conditioning products for your coffee machine.
Operation Touch display The coffee system is operated by a finger touch. If your fingers are cold, the touch display may not react to your finger contact . Do not use pointed or sharp objects, e.g. pens, to operate the touch display. This can damage the surface! The touch display will not react if you tap it with such objects. Do not let water get behind the display. Display The screen is divided into three areas: The top line shows you where you are in a menu.
Operation Using the touch display Each finger touch of an available option changes the respective field to orange. Selecting or calling up a menu ^ Touch the respective field once. Scrolling ^ Swipe the screen, i.e. place your finger on the touch display and swipe it in the desired direction. You can scroll to the right or the left. Some menu options allow you to scroll up and down too. ^ Touch the V and W arrows to scroll to the left or right.
Operation The numerical keypad appears. ^ Touch the desired numbers. When you enter a valid number, the "OK" field will go green. ^ Touch "OK". Entering letters Profile names or the names for your own drinks are entered using a keyboard. ^ Touch the desired letters or characters. ^ Touch "Save".
Operation The following symbols may appear in addition to the text and drinks symbols: P P P P G G GM 16 Settings such as the brightness of the display or the volume of the audio signals are selected via a bar chart. : Indicates information and instructions about operating the coffee system. Confirm the messages with "OK". 0 The system lock is active (see "Settings - Locking the coffee system (System lock 0)"): The coffee system cannot be operated.
First steps to use Before the first use Setting the language ^ The appliance must be correctly installed and connected before the first use. See the "Installation instructions". ^ Touch the desired language and then "OK". ^ Remove any protective coverings. Clean the coffee machine thoroughly (see "Cleaning and care") before filling it with water and coffee beans.
First steps to use Display Water hardness You can choose from the following options: Water hardness is an indication of the amount of minerals dissolved in water. The higher the mineral content, the harder the water. And the harder the water, the more often the coffee machine will need to be descaled. – On: The display will always show the date and time even when the system is turned off. – Off: The display is dark when the system is turned off.
First steps to use Checking water hardness level You can check the water hardness level using the supplied test strips. ^ Dip the test strip into your tap water for about one second. Then shake off any excess water. The result will be visible after about one minute. You can now set the water hardness level for the coffee system. Setting the water hardness ^ Touch "Settings" %. ^ Swipe the display until "Water hardness" appears, and then touch it. ^ Touch the hardness level you want and then "OK".
Filling the water tank ,Change the water daily to prevent bacteria growth. Before using the coffee system for the first time, clean the appliance. See "Cleaning and Care". Only fill the water tank with cold, fresh tap water. ^ Open the appliance door. Hot or warm water or other liquids can damage the coffee machine. Do not use mineral water to fill the water tank. Mineral water will cause serious lime scale deposits to build up in your coffee machine and damage it.
Filling the coffee bean container You can make coffee or espresso from roasted whole coffee beans that the coffee machine will grind fresh for each portion. Add fresh beans to the coffee bean container. Alternatively, you can make coffee or espresso from ground coffee (see "Coffee beverages prepared from ground coffee"). Tip: Raw coffee can be used if ground in a mill used for nuts or seeds. These mills generally have a rotating stainless steel blade.
Turning the coffee machine on and off Turning on When the machine is turned on, it heats up and rinses out the pipework. This cleans and heats the pipework to ready the machine for coffee preparation. If the coffee machine still has an operating temperature higher than 140°F (60°C), rinsing will not take place. Turning off for longer periods of time If you will not be using the coffee machine for a while: ^ Empty out the drip tray, the waste unit and the water tank. ^ Tap the On/Off button K.
Dispenser adjustment The main dispenser cannot be adjusted manually. The coffee system senses the height of the cup or glass being used. When a drink has been selected, the main dispenser automatically moves to the optimum height before dispensing the drink. Make sure that there is not a spoon or stirrer in the cup. This would prevent the coffee system from sensing the cup height correctly. You can turn off the automatic dispenser adjustment.
Preparing beverages Espresso, Coffee or Lungo coffee From the "Drinks" menu: Preparing two portions You can request two portions of espresso or coffee at once in one cup or in two separate cups simultaneously. From the "Drinks" menu: To fill two cups at the same time: ^ Place a cup under the main dispenser. ^ Touch Espresso ., Coffee / or Lungo coffee /. The chosen coffee drink will now be dispensed.
Preparing beverages Canceling preparation To cancel preparation, ^ Touch "Stop". or You can use the "Coffee pot" function twice in succession. After that, the coffee system will need to cool down for an hour to prevent damage to the appliance. ^ Touch "Cancel". Preparing multiple cups of coffee, one directly after another (Coffee pot ²) You can use the "Coffee pot" function to prepare multiple cups of coffee, one directly after another (max. 1 l), in order to fill a coffee thermos, for example.
Preparing beverages Adding ground coffee Use the scoop supplied with the system to ensure the correct amount of ground coffee is used. Do not add more than one level scoop of ground coffee to the coffee chute. If too much ground coffee is filled into the chute the brew unit cannot process it. Preparing coffee drinks from ground coffee If you want to use ground coffee: ^ Touch "Yes". You can now select which coffee drink you want prepared from the ground coffee. ^ Place a cup under the main dispenser.
Preparing beverages Beverages with milk You can prepare various specialty coffee beverages with milk or Hot milk and Milk froth. The following specialty coffee options are available: Cappuccino H consists of about twothirds milk froth and one-third espresso. Latte macchiato k consists of one-third each of hot milk, milk froth and espresso. a Lid Café latte ± consists of hot milk and coffee. c Milk intake tube Instructions for the milk container The milk is not cooled in the milk container.
Preparing beverages Preparing drinks with milk From the "Drinks" menu: ^ Place a suitable cup or glass under the main dispenser. ^ Swipe the display until the desired drink appears and then touch it. The drink will be prepared. Preparing hot water ,Caution! Danger of scalding and burns! The dispensed water is very hot. Preparing drinks using a profile If you have already created a profile (see "Profiles"), you can select it before preparing a drink. ^ Touch "Profiles" { and select the desired profile.
Customizing your coffee To customize the coffee system to suit your requirements, you can – change the grinder setting, – change the amount of ground coffee, – change the brewing temperature, or – turn on the "Pre-brewing" option. Grinder setting To prevent damage to the grinder: Adjust the coffee grinder one level at a time. Grind the beans again before adjusting another notch. ^ Open the front of the coffee system. You can change the grinder setting to suit the type of coffee you are using.
Customizing your coffee Changing the drink parameters The amount is too much if You can change the amount of ground coffee, the pre-brewing and the brewing temperature for each drink individually. – espresso or coffee just drips into the cup; From the "Drinks" menu: – the crema is dark brown; – the espresso or coffee tastes bitter. ^ Touch "Edit" or swipe the display until "Make drinks" appears and then touch it. Decrease the amount of ground coffee so that a weaker coffee is brewed.
Customizing your coffee Pre-brewing ground coffee When the pre-brewing function is turned on, the freshly ground coffee is first moistened with a little hot water. Then the remaining water is forced through the moistened coffee at high pressure. This helps release the flavor of the coffee. You can select short or long prebrewing or turn off the "Pre-brewing" function. The system is delivered with "Prebrewing" turned off. ^ Swipe the screen in the "Pre-brewing" field until the setting you want appears.
Setting the serving size The flavor of a coffee beverage depends not only on the type of coffee, but also on the quantity of water used. You can adjust the amount of water used for each portion of espresso, coffee or hot water to suit your cup size and the type of coffee used. For beverages prepared with milk, you can also adjust the milk and milk froth ratio in addition to the espresso or coffee size. You can also program the portion sizes of hot milk and froth.
Setting the serving size The coffee system will now start preparing your drink. Portion sizes can be set for each selected ingredient when "Save" is displayed. ^ Touch "Save" when the correct amount of the particular ingredient has been dispensed. ^ Save the portion size for the selected ingredients. The programmed portion size and ingredients will now be dispensed every time that particular drink is selected.
Resetting drinks You can reset the portion sizes and parameters for all drinks back to their factory default setting. From the "Drinks" menu: ^ Touch "Edit". ^ Touch "Reset drinks". "Reset all drinks to default?" appears in the display. ^ Touch "Yes".
Profiles If the coffee system is used by several people with different coffee preferences, you can create individual user profiles. You can choose the serving size of each coffee beverage for each profile (see "Setting the serving sizes"). The name of the current profile is shown at the top left of the display. Accessing profiles ^ Touch { in the main menu or "Profiles" in the drinks menu. Creating a user profile ^ Touch "Create profile". The editor will open in the display.
Profiles Changing a profile You can customize the system so that after preparing each beverage it automatically reverts to the standard Miele profile or retains the most recently selected custom profile. ^ Touch "Edit". ^ Touch "Change profile". You can now choose between: – Manually: The system retains the selected profile until another profile is selected. – After each use: After each beverage is dispensed, the system automatically reverts to the standard Miele profile.
Editing drinks for a profile You can create your own beverages for each profile and set the portion size and parameters, e.g. amount of coffee, brewing temperature, for each beverage individually. You can also change the names of the drinks and delete any unwanted drinks from the profile. A profile can contain a maximum of nine drinks. ^ Enter a name for the newly created drink (maximum of 8 characters) and touch "Save". The newly created drink will appear in the profile.
MyMiele Frequently prepared drinks, drinks from profiles and preferred maintenance programs can be displayed on the MyMiele screen. Deleting entries ^ Touch "Edit". ^ Touch "Delete entry". You can select the MyMiele screen as your starting screen (see "Settings Starting screen"). This screen is displayed each time you turn your coffee system on. ^ Select the entry you want to delete and confirm with "OK". Accessing MyMiele ^ Touch "Edit". ^ In the main menu, touch "MyMiele" .
Settings The "Settings" menu allows you to customize the coffee system for your personal needs. Accessing the "Settings" menu Changing and saving settings ^ Touch "Main menu" or the "Back" sensor. ^ Touch "Settings" % . You are in the "Drinks" menu. ^ Swipe the display until the setting you want appears and then touch it. ^ Touch "Main menu" or the "Back" sensor. ^ Swipe the display until the option you want appears and then touch it. ^ Touch "Settings" % . The setting is now saved.
Settings Overview of the Setting options The factory default for each setting is displayed in bold.
Settings Option Available settings Water hardness Soft 1 Medium 2 Hard 3 Very hard 4 Brightness Set Volume Audio signals Keypad tone Dispenser adjustment On / Off Showroom program Demo mode (On / Off) Factory default settings Settings MyMiele 41
Settings Language Clock type You can select your language and country for all the displayed text. The time can be displayed as Tip: If you have accidentally selected the wrong language, follow the flag icon F to return to the "Language" option. Time You can customize the time display, the time format and the time of day. Analog or Display (Time of day) You can choose from the following options: – On: The time of day is always displayed even when the system is turned off. Digital .
Settings Timers There are two timers with the following functions: The coffee system – turns on at a particular time, e.g. in the morning for breakfast ("Turn on at"). – turns off at a particular time ("Turn off at"). – turns off automatically after a certain amount of time if no sensor is touched or no drink is prepared ("Turn off after"; only available for Timer 1). You can also assign the timer functions to individual days of the week.
Settings Assigning week days Eco mode Select the day of the week you want. The selected weekday is marked as 9. The eco mode is a power-saving mode. The steam system will only heat up once a coffee beverage or steam for hot milk and milk froth is requested. When all desired weekdays are checked: ^ Touch "OK".
Settings Lighting Info (displaying information) The following options are available: In the "Info" option, the number of portions prepared for each individual drink can be displayed. – Adjust the brightness of the lighting while the system is turned on. – Adjust the brightness of the lighting while the system is turned off. – Specify when the lighting should turn off ("Turn off after").
Settings Water hardness You will find the information on water hardness in "First steps to use". Brightness You can set the brightness of the display in the bar chart. Volume You can adjust the volume of the audio signals and keypad tones in the bar chart. Adjusting the dispensers You can find the information on dispenser adjustment in "Dispenser adjustment". Factory default settings You can reset the settings back to the ones which were set when the coffee system was delivered.
Cleaning and care Overview ,The coffee system must be cleaned regularly to prevent a build-up of bacteria.
Cleaning and care Danger of burns! Let the unit cool down before you clean it, especially the water in the drip tray. Do NOT use a steam cleaner to clean this unit. Doing so will damage the unit. Never use cleaning products that contain sand, cleaning soda, acids, or chlorides! They will corrode the surface. To avoid bacteria growth and odors it is important to clean the machine regularly. The main dispenser connector cap is lubricated with silicone grease.
Cleaning and care Rinsing the system After a coffee beverage has been prepared, the coffee system rinses itself before turning off. This removes any remaining coffee residue. You can also rinse the system manually. ^ Touch "Main menu" or the # sensor. ^ Touch "Maintenance" y. ^ Touch "Rinse the appliance". The pipework will now be rinsed. The water used for rinsing will run out of the main dispenser. Milk pipework Make sure that the milk pipework is cleaned regularly and thoroughly.
Cleaning and care Cleaning the milk pipework using the milk line cleaner Make sure that the milk pipework is cleaned regularly and thoroughly. Milk contains natural bacteria that will multiply if the pipework is not sufficiently clean. Contamination of the system can be a health risk. The milk pipework must be cleaned about once a week. The coffee system will remind you at the correct time. "Clean the milk pipework in 3 days" is displayed three days before the due date.
Cleaning and care Milk container with lid Ensure that the neck and lip of the container are kept clean (both when filling and when moving the container). Contamination can cause the system to malfunction. ^ Fill the water tank with lukewarm water up to the 8 mark and stir the solution. ^ The milk container (glass) can be cleaned in the dishwasher or by hand with warm water and liquid dish soap. After cleaning, dry the milk container.
Cleaning and care Main dispenser Clean the cover of the main dispenser by hand only, using warm water and liquid dishsoap. All other components are dishwasher safe. The main dispenser must be in the maintenance position for cleaning. Otherwise you will not be able to remove the parts. If there is a container underneath the main dispenser, remove it so that the main dispenser can move into the maintenance position.
Cleaning and care ^ Turn the top connecting piece a and pull it up and off. Then pull the bottom connecting piece b up and off. ^ Pull off the dispensing nozzles c. Do not remove the Y-piece. ^ Thoroughly clean all components. ^ Now reassemble the dispensing unit in the reverse order. Make sure that the upper connecting piece a clicks into place. Push the dispensing nozzles b firmly onto the dispensing unit. ^ Reinsert the dispensing unit. ^ Replace the cover.
Cleaning and care Cleaning the milk valve Sensor cover You should clean the milk valve once a week to ensure good quality milk froth. The sensor cover for the cup protection shut-off is located under the main dispenser. If the automatic dispenser adjustment sensors do not clearly recognize a container, the cup protection shut-off stops the main dispenser. ^ Touch "Main menu" or the # sensor. ^ Touch "Maintenance" y. ^ Touch "Clean the main dispenser".
Cleaning and care Water tank Waste unit Change the water every day to prevent a build-up of bacteria. After a certain time, the coffee system displays a message indicating that the waste unit needs to be emptied. At this point the container must be cleaned. However, it is best to clean the waste container daily. Coffee grounds can become moldy. Typically there will also be some water in the waste container, left over from the brewing and rinsing processes.
Cleaning and care Drip tray Clean the drip tray daily to prevent odors and mold. The coffee system displays a message when the drip tray is full and needs to be emptied. At this point the drip tray must be emptied. ,Risk of burns! If the coffee system has just been rinsed, wait a while before removing the drip tray. Rinse water runs out of the dispensers. ^ Open the front door and carefully remove the drip tray. The grid in the drip dray helps keep the water in place while you move the full drip tray.
Cleaning and care Drip tray cover Main dispenser connector ^ Remove the drip tray cover. A connecting piece between the brew unit and the main dispenser is located on the inside of the front. ^ The drip tray cover can be cleaned in the dishwasher or by hand using warm water and liquid dish soap. ^ Dry the drip tray cover thoroughly. ^ Replace the cover onto the drip tray. Make sure that the front of the cover is flush with the drip tray.
Cleaning and care Interior and front door ^ Clean the interior and the front door with warm water and liquid dish soap once all removable parts have been removed. Tip: Use a vacuum cleaner to remove dry coffee grounds. In the lower part of the inside of the front door there is a drip catcher. Brew unit Clean the brew unit by hand only using warm water. Do not use soap. The moving parts of the brew unit are lubricated. Detergents will damage the brew unit. Clean the brew unit once a week.
Cleaning and care If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (see "Frequently asked questions"). When the brew unit has been pulled out, do not alter the position of the brew unit handle. This would shift the brew unit and it would not fit back into the coffee system. To replace the brew unit, repeat the previous steps in the reverse order: ^ Push the brew unit back into the coffee system, making sure it is straight.
Cleaning and care Degreasing the brew unit Depending on the natural oil content of the coffee used, the brew unit can become blocked quite quickly. Use the supplied cleaning tablets to clean the brew unit. When the display prompts you to "Place a cleaning tablet in the ground coffee chute and close the chute": ^ Remove the ground coffee chute cover and open the chute lid. These cleaning tablets were specially formulated for use in the coffee system. They are available from Miele.
Cleaning and care Exterior The surfaces can become discolored or otherwise altered if soiling is not cleaned promptly. Remove any soiling immediately. Make sure no water can penetrate the display! All external surfaces are susceptible to scratching. On glass surfaces, scratches can lead to breakage. All surfaces can become discolored if they are cleaned with unsuitable products. Make sure to immediately wipe away any spills during descaling! ^ Touch the On/Off sensor K to turn the coffee system off.
Descaling Limescale builds up in the coffee system during use. The limescale buildup in the system depends on the hardness of your local water supply. Limescale must be removed regularly. The system guides you through the descaling process. Various instructions appear in the display, e.g. you are prompted to empty the drip tray or fill the water tank. Descaling is absolutely necessary and takes approximately 20 minutes.
Descaling The descaling program is now complete and drinks can be prepared again. When descaling the system, be sure to wipe off any splatters of descaling agent immediately! These could damage the surfaces. ^ Fill the water tank to the F mark with lukewarm water. ^ Add two descaling tablets to the water. Please observe the mixing ratio for the descaling tablets. It is important that you fill the water tank to the mark. Too little water can cause the descaling program to stop prematurely.
Frequently asked questions ,Repairs to electrical appliances should only be carried out by a suitably qualified person in accordance with local and national safety regulations. Repairs and other work by unqualified persons could be dangerous. The manufacturer cannot be held responsible for unauthorized work. Display messages ^ To address the "fault", follow the instructions on the display. ^ If the fault message still appears on the display, contact Miele Technical Service.
Frequently asked questions Fault Possible cause and solution ^ The brew unit cannot reset to the correct position or it is Fault 73 clogged and the ground coffee cannot be processed. or "Check brew unit" ^ See if you can remove the brew unit (see "Cleaning and care – Brew unit"). ^ If you can remove the brew unit, clean it (see "Cleaning and care – Brew unit"). Push the coffee ejector of the brew unit into the standard position (see illustration). ^ Reinsert the waste container and the water tank.
Frequently asked questions Fault Possible cause and solution Fault 234 The cup protection shut-off has been triggered three times since the coffee system was turned on. The cups or glasses being used are not clearly recognized by the automatic dispenser adjustment. ^ Use only cups or glasses that can be recognized by the automatic dispenser adjustment. The automatic dispenser adjustment is malfunctioning. ^ Touch the On/Off sensor K to turn off the coffee system.
Frequently asked questions Unusual behavior of the coffee system Problem Possible cause and solution The lighting does The lighting has been turned off. not come on when ^ Turn on the lighting (see "Settings – Lighting"). the coffee system is turned on. The lighting is defective. ^ Contact Technical Service. The display remains dark when the coffee system is turned on using the On/ Off sensor K. The On/Off sensor K was not touched long enough.
Frequently asked questions Problem Possible cause and solution The coffee system does not turn on at the programmed time even though "Turn on at" is activated. System lock is activated. ^ Deactivate system lock (see "Settings – System lock"). No days of the week have been selected. ^ Check the timer settings and adjust if necessary (see "Settings – Timers"). The coffee system was not used after being automatically turned on three times in a row (see "Settings – Timers").
Frequently asked questions Problem Possible cause and solution The display shows The milk container lid may be soiled, causing the sensors to the message "Fill malfunction. and insert milk ^ Thoroughly clean the lid and milk container (see "Cleaning container" clogged milk pipework"). although the milk container is full and in place. "Empty drip tray" appears in the display even though the drip tray is empty. The drip tray is not inserted correctly. ^ Slide the drip tray all the way into the unit.
Frequently asked questions Problem Possible cause and solution The cup or glass being used is repeatedly not recognized by the automatic dispenser adjustment. The main dispenser moves to the rim of the cup and triggers the cup protection shutoff. Use only cups or glasses which can be recognized by the automatic dispenser adjustment. The cup protection shut-off is malfunctioning. The main dispenser moves to the rim of the cleaning or other container, jamming it in.
Frequently asked questions Unsatisfactory results Problem Possible cause and solution The consistency of The milk temperature is too high. Good milk froth can only the milk froth is be prepared with cold milk (< 55°F/13°C). unsatisfactory. ^ Check the milk temperature in the milk container. The milk pipework or the air intake hose is clogged. ^ Follow the instructions in chapter "Cleaning clogged milk pipework".
Frequently asked questions Problem Possible cause and solution There is no proper The grind level is too coarse or too fine. crema on the ^ Set the grinder control to a coarser or finer setting (see coffee or "Adjusting the grinder setting"). espresso. The brewing temperature is too high for the type of coffee being used. ^ Set a lower brewing temperature (see "Brewing temperature"). The coffee beans are no longer fresh. ^ Add fresh beans to the coffee bean container.
Cleaning clogged milk pipework If the quality of the milk froth is unsatisfactory, the air intake hose may be clogged. Follow the instructions in "Step 2: Cleaning the air intake hose and angled section in the door." Step 1: Cleaning the milk pipework in the lid of the milk container If no milk comes out of the main dispenser, only steam, please follow the instructions in Steps 1 to 3. First check if the milk in the milk container has spoiled. This can clog the milk pipework.
Cleaning clogged milk pipework To reassemble the lid: ^ First put the seal in the lid. Then insert the milk intake pipe into the seal. Make sure not to slide the beveled end of the milk intake hose into the seal. Step 2: Cleaning the air intake hose and angled section in the front door Do not use a needle or similar sharp item. They can damage the parts. ^ First detach the air intake hose a from the opening c. Then pull off the angled section b. ^ Pull both hoses out of the angled section.
Cleaning clogged milk pipework ^ Slide the hoses back onto the angled section and reinsert it. ^ Insert the brush into the milk valve. Move the brush back and forth. ^ Reinsert the air intake hose into the opening c. ^ Remove and disassemble the dispensing unit as described in "Cleaning and care – Main dispenser". Step 3: Cleaning the milk valve and the milk pipework in the main dispenser ^ Touch "Main menu" or the "Back" sensor. ^ Touch "Maintenance" y. ^ Touch "Clean the main dispenser".
After sales service In the event of a fault which you cannot easily fix yourself, please contact the Miele Technical Service Department at the contact information on the back of this booklet. When contacting the Technical Service Department, please quote the model and serial number of your appliance given on the data plate inside the appliance.
Installation instructions Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information. Leave these instructions with the appliance for the consumer/user. Information is subject to change. Please refer to our website to obtain the most current product specification, technical & warranty information.
Caring for the environment Disposal of packing material Disposal of an old appliance The cardboard box and packing materials protect the appliance during shipping. They have been designed to be biodegradable and recyclable. Please recycle. Old appliances may contain materials that can be recycled. Please contact your local recycling authority about the possibility of recycling these materials. Ensure that any plastic wrappings, bags, etc. are disposed of safely and kept out of the reach of children.
Electrical connection Make sure that the power to the machine is OFF before installing or performing maintenance or repairs. WARNING: THIS APPLIANCE MUST BE GROUNDED Important All electrical work should be performed by a qualified electrician in strict accordance with national and local safety regulations. Installation, repairs and other work by unqualified persons could be dangerous. The coffee system comes equipped with a 6 ft (1.
Installation Installation and combination options The system is designed to be built into cabinetry.
Installation It is also possible to combine it with other built-in Miele appliances. If the coffee system is to be built in above another appliance, there must be a full-width, closed shelf between them (exception: installation with a warming drawer).
Installation Ventilation When installing the coffee system, make sure that it is sufficiently ventilated at the back so that steam and hot air can escape. The ventilation openings in the surrounding cabinets and the space below the ceiling must be at least 78 3/4"² (200 cm²). Otherwise condensation can form, causing damage to the coffee system or the surrounding cabinets. Installation Make sure no power is supplied to the unit.
Installation Tip: A place to set down the coffee system at the level of the installation recess is helpful. This makes it easier for you to install the system's connections. ^ Open the front door and partially tighten the screws. ^ Unscrew the four feet on the underside of the unit by about 1/16" (2 mm) using the larger Allen wrench. The feet can be unscrewed by up to 3/8" (10 mm).
Installation Adjusting the door hinges If the door cannot be opened or closed easily after installation, you will have to align the door (TX 20): ^ To adjust the door flush with the front of the cabinet, turn screw a. ^ To adjust the door horizontally and vertically, turn screw b.
RemoteVision (optional accessory) Miele's RemoteVision Wi-Fi technology creates a 'virtual link' between your appliance and our monitoring center. If a fault occurs, Miele's client service center will be notified and contact you, or another trusted individual identified on your call roster, in order to gain access to your appliance to fix the problem. For information on set-up and installation of the RemoteVision module see the "Installation" section of this manual.
Copyright and licenses Miele uses software to operate and control the coffee system. This product contains Adobe® Flash® Player software under license from Adobe Systems Incorporated, Adobe Macromedia Software LLC. Adobe and Flash are registered trademarks of Adobe Systems Incorporated. The proprietary rights of Miele and other relevant software suppliers (e.g. Adobe) must be respected. Miele and its suppliers reserve all rights to the software components.
Please have the model and serial number of your appliance available before contacting Technical Service. U.S.A. Canada Miele, Inc. Importer Miele Limited National Headquarters 9 Independence Way Princeton, NJ 08540 Phone: 800-843-7231 609-419-9898 609-419-4298 Fax: www.mieleusa.com Technical Service & Support Nationwide Phone: 800-999-1360 888-586-8056 Fax: TechnicalService@mieleusa.com Headquarters and Miele Centre 161 Four Valley Drive Vaughan, ON L4K 4V8 www.miele.
CVA 6800 en - US, CA M.-Nr.
