Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation information
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation space
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the appliance
- Securing the appliance in the niche
- Securing the base cover plate and the baseboard
- Aligning the appliance doors
- Adjusting the door opening angle (optional accessory)
- Electrical connection
- Water connection
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Water filter
- Technical Service
- Declaration of conformity
- Leere Seite
Adjusting the interior fittings
85
Removing the ice cube tray
The ice cube tray can be removed for
cleaning:
Open the lower appliance door as
wide as possible.
Tilt the ice cube tray forwards and
pull it up and out to remove it.
Ice cube production does not stop
when the ice cube tray has been re-
moved. Ice cubes can fall into the
freezer basket underneath.
Only remove the ice cube tray for the
shortest time possible or switch off
the Ice Maker beforehand (see
“Switching off the Ice Maker” in
“Making ice cubes”).