Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation information
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation space
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the appliance
- Securing the appliance in the niche
- Securing the base cover plate and the baseboard
- Aligning the appliance doors
- Adjusting the door opening angle (optional accessory)
- Electrical connection
- Water connection
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Water filter
- Technical Service
- Declaration of conformity
- Leere Seite
Selecting additional settings
75
Switching on theDisplay Active Air-
Clean Filter
If theDisplay Active AirClean Filter has
been switched off once, it must be
switched on again if required.
In settings mode, use the and
arrow buttons to selectDisplay Active
AirClean Filter and selectOK to confirm
your selection.
Use the and arrow buttons to
selectOn and touchOK to confirm
your selection.
TheDisplay Active AirClean Filter has
been switched on.
Switching off theDisplay Active Air-
Clean Filter
If you do not require theDisplay Active
AirClean Filter, you can switch it off.
In settings mode, use the and
arrow buttons to selectDisplay Active
AirClean Filter and selectOK to confirm
your selection.
Use the and arrow buttons to
selectOff and touchOK to confirm
your selection.
TheDisplay Active AirClean Filterhas
been switched off.
Resetting theDisplay Active AirClean
Filter
TheDisplay Active AirClean Filter must be
reset each time the filter is replaced, so
that it is displayed again after 6months.
In settings mode, use the and
arrow buttons to selectDisplay Active
AirClean Filter and selectOK to confirm
your selection.
Use the and arrow buttons to
selectReset and touchOK to confirm
your selection.
The Change Active AirClean Filtermessage
disappears from the display.
The Display Active AirClean Filter has
been reset.