Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation information
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation space
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the appliance
- Securing the appliance in the niche
- Securing the base cover plate and the baseboard
- Aligning the appliance doors
- Adjusting the door opening angle (optional accessory)
- Electrical connection
- Water connection
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Water filter
- Technical Service
- Declaration of conformity
- Leere Seite
Water connection
44
Installing the water hose to the
appliance
Before establishing the plumbed-wa-
ter connection, ensure that the appli-
ance is disconnected from the power
supply.
When installing the water hose, make
sure that it is neither kinked nor dam-
aged.
By this time, the installation niche
should already have been prepared so
that the appliance needs only to be
pushed into it.
Position the appliance slightly in front
of the installation niche so that the
shut-off valve can still be accessed.
2
The water connection of the appli-
ance is ready for connection at the
rear of the appliance.
Install the water hose onto the wa-
ter connection at the rear of the
appliance. Ensure that the connec-
tions are tight and leak-proof.
7/16"
2
Connect the water hose to the
shut-off valve.
Ensure that it is properly screwed into
position.
Slowly open the shut-off valve in the
water supply line and check the
whole water system for leaks.
The appliance can now be installed in
the niche (see “Installation”).
The appliance can now be connected
to the power supply (see “Electrical
connection”).