Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation information
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation space
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the appliance
- Securing the appliance in the niche
- Securing the base cover plate and the baseboard
- Aligning the appliance doors
- Adjusting the door opening angle (optional accessory)
- Electrical connection
- Water connection
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Water filter
- Technical Service
- Declaration of conformity
- Leere Seite
Building in the appliance
39
Remove the nuts and washers
from the threaded bolts of the top
and bottom appliance door.
Align the height and sides of the ap-
pliance doors using the threaded
bolts.
If necessary, also align the depth of
the appliance doors via the gaps in
the angle trims.
Close the appliance doors and check
the distance between the door and
adjacent cabinetry fronts again.
Then re-tighten all screws and .
Place the washers and nuts back
on the threaded bolts and tighten
the nuts. The appliance doors are
now secured.
Reattach the covers, , and .
Remove the spacers from the ap-
pliance doors.