Operating and Installation Instructions
Table Of Contents
- Contents
- IMPORTANT SAFETY INSTRUCTIONS
- Caring for the environment
- Installation information
- Installation dimensions
- Building in the appliance
- Before starting...
- Tools required
- Aligning the installation niche
- Checking the installation space
- Before installation
- Preparing the installation niche
- Pushing the appliance into the niche
- Aligning the appliance
- Securing the appliance in the niche
- Securing the base cover plate and the baseboard
- Aligning the appliance doors
- Adjusting the door opening angle (optional accessory)
- Electrical connection
- Water connection
- How to save energy
- Guide to the appliance
- Accessories
- Before first use
- Switching on and off
- Selecting additional settings
- The correct temperature
- Using Automatic SuperCool and SuperFreeze
- Temperature and door alarm
- Adjusting the interior fittings
- Storing food in the refrigerator section
- Storing food in the MasterFresh zone
- Freezing and storing food
- Making ice cubes
- Automatic defrosting
- Cleaning and care
- Frequently Asked Questions
- Causes of noises
- Water filter
- Technical Service
- Declaration of conformity
- Leere Seite
Building in the appliance
37
Connect the appliance to the house-
hold water supply (see “Plumbed wa-
ter connection”).
Securing the base cover plate
and the baseboard
Do not cover the vents in the base.
This will damage the appliance!
Remove the film from the base cover
plate .
Secure the base cover plate to the
baseboard.
Click the baseboard onto the bot-
tom of the appliance base.
Aligning the appliance doors
After installation, align the appliance
doors with adjacent cabinetry fronts.
To do this, check the gaps to the adja-
cent cabinetry fronts.
If necessary, use the spacers pro-
vided and place them at the top of
the appliance doors on both sides.