Tracker Pod1 User Manual Revision: 1.00 Document Title Pod1 User manual Version 1.
Contents 1 Introduction .................................................................................................................................... 3 2 Product Overview .......................................................................................................................... 3 2.1 Appearance .......................................................................................................................... 3 2.2 LED Description .................................................
1 Introduction Pod1 use primary batteries. it is a powerful GPS locator which is designed for vehicle, and assets tracking . With superior receiving sensitivity, Its location can be real time or schedule tracked by backend server or specified terminals.
2.2 LED Description Figure 2-2 There is one tricolour LED lights in Pod1 device, the description as following.
3 Getting Started 3.1 Parts List Name Picture Remark Pod1 The LTE/GPS locator. 3.2 How GPS position Fix Your device has an unobstructed view of the sky,lying face up,so it can obtain the initial GPS Fix Figure 3-1 3.3 Disassemble Introduction 1.
2.Machine appearance： Figure 3-2 3.Unscrew cover Figure 3-3 3.4 Insert SIM Card Figure 3-4 3.
3.
5 Trouble shooting and Safety info 5.1 Trouble shooting Trouble Messages can’t be reported to the backend server by Mobile network. Possible Reason APN is wrong. Some APN can not visit the internet directly. Solution Ask the network operator for the right APN. The IP address or port of the backend server is wrong. Make sure the IP address for the backend server is an identified address in the internet. Unable to power off Pod1. The function of power key was disabled by AT+GTFKS.
FCC Caution. §15.19 Labelling requirements. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. § 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.
