Tracker Prime ME User Manual Revision: 1.
Contents 1 Introduction....................................................................................................................................3 2 Product Overview ..........................................................................................................................3 2.1 Appearance..........................................................................................................................3 2.2 Buttons/Micro USB Interface Description...............................
1 Introduction Prime-ME is a powerful GPS locator which is designed for vehicle, pets and assets tracking. With superior receiving sensitivity, fast TTFF and GSM frequencies 850/900/1800/1900, and WiFi hotspot aiding position function. Its location can be real time or schedule tracked by backend server or specified terminals.
Micro USB interface Connect a 5V DC adapter can power on Prime-ME and charge the internal battery Backend server developer or administrator can use the data cable to configure Prime-ME Reset Key Click the key will turn off internal VBAT when OS is abnormal, and then press Power Key to restart Prime-ME. 2.3 LED Description Figure 1-2 There are three LED lights in Prime-ME device, the description as following.
3 Getting Started 3.1 Parts List Name Picture Remark Prime-ME Locater The GSM/GPRS/GPS locator. AC-DC Power Adapter It is used to charge the internal battery of Prime-ME. Prime-ME Data and charger Cable It the USB data cable which can be used for firmware upgrading and configuration. It also includes the charger interface on the Prime-ME. 3.2 Battery Charging The following items are suggestion for battery charge, please pay more attention. Please connect AC-DC power adapter with Prime-ME device.
3.3 Prime-ME Data Cable Prime-ME Data Cable is a cable with a Micro USB connector. The USB data cable is used for data download, which will be used for firmware update or configuration and can be used for charging at the same time. Figure 2-1 3.4 Power on/Power off Figure 2-2 Power on: Press the Power key at least 3 seconds and release it to power on Prime-ME device. Note that, the three LED lights will flash in turn.
4 Trouble shooting and Safety info 4.1 Trouble shooting Trouble Possible Reason Solution Messages can’t be reported to the backend server by Mobile network. The IP address or port of the backend server is wrong. Make sure the IP address for the backend server is an identified address in the internet. Battery can not be charged The battery has not been used for too long time and has been locked. Using a external power source with 3.6V to 4.
FCC Notice: NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protec tion against harmful interference in a residential installation. Th is equipment generates us es and can radiate radio frequency energy and, if not install ed and used in accordance with the instructions, may ca use harmful interference to radio communication s.
WARNINGS: BATTERY AND CHARGERS: Unplug the charger from the electrical plug and the device when not in use. Use the AC power s upply defined in the specifications of the charger. An improper power voltage may cause a fire or a malfunction of the charger. If the power cable is damaged (for example, the cord is exposed or broken), or the plug loosens, stop using the cable at once. Otherwise, it may lead to an electric shock, a short circuit of the charger, or a fire.
EU Regulatory Conformance Hereby, we dedares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Certification Information (SAR) This devic e meets guidelines for exposur e to radio waves. Your device is a low-power radio transmitter and receiv er. As recommended by international guidelines, the device is designed not to exceed the limits for exposure to radio waves.
