911 RESPONDER User Guide Revision: 1.00 Document Title 911 RESPONDER User Guide Version 1.
Contents 1 Introduction........................................................................................................................................................................... 2 Product Overview.................................................................................................................................................................. 2.1 Appearance.........................................................................................................................
1 Introduction 911 Responder is a mobile phone which mainly is used for emergency call. With superior receiving sensitivity, fast WCDMA frequencies 850/1900 and GSM frequencies 850/900/1800/1900. Based on the embedded wireless protocol, 911 Responder can communicate with the backend server through WCDMA or GSM/GPRS network, and transfer reports of emergency, low battery, device information etc… 2 Product Overview 2.1 Appearance Figure 1-1 2.
2.3 LED Description Figure 1-2 There are two LED lights in 911 Responder device, the description as following.
3 Getting Started 3.1 Parts List Name Picture Remark 911 Responder 911 Responder AC-DC Power Adapter It is used to charge the internal battery of 911 Responder 911 Responder Data and charger Cable It the USB data cable which can be used for firmware upgrading and configuration. It also includes the charger interface on the Pa23W. 3.2 Battery Charging The following items are suggestion for battery charge, please pay more attention. Please connect AC-DC power adapter with 911 Responder device.
charged, which will make the life of battery much longer. 3.3 911 Responder Data Cable 911 Responder Data Cable is a cable with a Micro USB connector. The USB data cable is used for data download, which will be used for firmware update or configuration and can be used for charging at the same time. Figure 2-1 3.4 Power on/Power off Figure 2-2 Power on: Press the SOS key at least 3 seconds and release it to power on 911 Responder.
4 Trouble shooting and Safety info 4.1 Trouble shooting Trouble Possible Reason Solution Unable to power off 911 Responder. Battery can not be charged The device will power off automatically 5 minutes after the call The battery has not been used for too long time and has been locked. Using a external power source with 3.6V to 4.2V DC power supply to active the battery or apply for after sale help. 4.2 Safety info The following items are suggestion for safety use, please pay more attention.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.