PA31 User Manual Revision: 1.00 Document Title Version Finale Date Status 1.
Contents 1 Introduction .................................................................................................................................... 3 2 Product Overview .......................................................................................................................... 3 2.1 Appearance .......................................................................................................................... 3 2.2 Buttons Description..............................................
1 Introduction PA31 is a rescue device with voice function.It works on LTE B2 / B4/B5/B12/B13 network with superior receiving sensitivity. Based on the embedded wireless tracking protocol, PA31 can communicate with the backend server through LTE network, and transfer emergency reports. 2 Product Overview 2.1 Appearance Figure 1-1 2.2 Buttons Description Button /12PIN Interface Description KEY/interface Description Energy query Key Query How much energy left.
2.3 LED Description To be added Figure 1-2 There are 2LED lights in PA31 device, the description as following.
3 Getting Started 3.1 Parts List Name Picture Remark Rescue device charging Dock charging for the device 3.2 Battery Charging The following items are suggestion for battery charge, please pay more attention. The red LED of charging Dock will be steady light no matter rescue device is charging or not. Charging will last about 1.5 hours. Note: If the Rescue device is firstly used, please make sure the battery is fully charged, which will make the life of battery much longer.
3.3 Charging Dock Charging Dock is a base with an AC Adapter. The charging dock is used for device charging , which can be used for charging at any time ( by end user).. Figure 2-2 3.
Power on: Press the SOS key at least 3 seconds and release it to power on rescue device. Power off: Rescue device is auto power off and user can’t turn off the machine by itself. 4 Frequency LTE CATM:Band2、Band4、Band5、Band12、Band13 WIFI:2.4GHz 5 Trouble shooting and Safety info 5.1 Trouble shooting Trouble Possible Reason Solution Messages can’t be reported to the backend server by Mobile network. APN is wrong. Some APN can not visit the internet directly.
5.2 Safety info The following items are suggestion for safety use, please pay more attention. Please do not disassemble the device by yourself. Please do not put the device on the overheating or too humid place, avoid exposure to direct sunlight. Too high temperature will damage the device or even cause the battery explosion. Please do not use the device on the airplane or near medical equipment. FCC Caution. § 15.19 Labelling requirements. This device complies with part 15 of the FCC Rules.
During the product certification period,according to this standard report test, the highest SAR value reported to the FCC when the device is in use It is 1.082w/kg. This device was tested for typical body-worn operations with the edge of the device kept 5mm from the body.To maintain compliance with FCC RF exposure requirements, use accessories that maintain a 5mm separation distance between the user’s body and the edge of the device.