Tracker AGPS 1000 User Manual Revision: 1.00 Document Title AGPS 1000 User manual Version 1.
1 Introduction ................................................................................................................................... 3 2 Product Overview ........................................................................................................................... 3 2.1 Appearance ......................................................................................................................... 3 2.2 Buttons ...................................................................
1 Introduction AGPS 1000 is a powerful GPS locator which is designed for vehicle, human, pets and assets tracking. It works on LTE B2/B4/B12 with superior receiving sensitivity. Its location can be real time or schedule tracked by backend server or specified terminals.
Reset Key Click the key will turn off internal VBAT when OS is abnormal, and then press Power Key to restart AGPS 1000. TEST Key Long press to make a call 2.3 LED Description Figure 1‐2 There are three LED lights in AGPS 1000 device, the description as following.
3 Getting Started 3.1 Parts List Name Picture Remark AGPS 1000 Locater The LTE/GPS locator. AGPS 1000 charger It used to be charging for the AGPS 1000. 3.2 Battery Charging The following items are suggestion for battery charge, please pay more attention. During the charging process, the Power LED light will slow flash. When the battery is fully charged, the Power LED light will be Ever‐dark. You can charge the battery using charging dock which connects AGPS 1000 device with the Adapter.
Figure 2‐1 3.4 Power on/Power off Figure 2‐2 Power on: Press the Power key at least 3 seconds and release it to power on AGPS 1000 device. Note that, the Power LED light will light for a moment and then turn off. Power off: Press the power key about 3 seconds; Power LED light will light for a moment and then turn off, which indicates that AGPS 1000 device has been powered off. Note: the user can not power off AGPS 1000 if the power key is disabled by protocol.
5 Trouble shooting and Safety info 5.1 Trouble shooting Trouble Possible Reason Solution Messages can’t be reported to the backend server by Mobile network. APN is wrong. Some APN can not visit the internet directly. Ask the network operator for the right APN. The IP address or port of the backend server is wrong. Make sure the IP address for the backend server is an identified address in the internet. Unable to power off AGPS 1000. The function of power key was disabled by AT+GTFKS.
§ 15.21 Information to user. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. § 15.105 Information to the user. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The SAR limit of IC is 1.6W/Kg averaged over one gram of tissue. Product Type:Tracker, model number: AGPS 1000 (IC: 8414B-AGPS4GA) has also been tested against this SAR limit. The device was test for typical body-worn operations and head face up operations keep the Tracker at least 10mm from the face.when worn on body must be correct back clip for this product,Use of non-approved accessories may result in exposure levels which exceed the uncontrolled envirnomental RF exposure limits.
