MTI RU-888-1 RFID USB Dongle User Manual Version 5.0 MTI Group Proprietary Information Any unauthorized use, duplication, reproduction, or disclosure of this document may be considered as infringement of MTI Group’s intellectual property rights, the infringer may be accused and liable applicable legal penalties.
Content 1. User Set Up 2. Start Demo SW 3. Advanced Reader Setting 4. Inventory Run 5. Advanced Tag Setting MTI Group Proprietary Information 台揚集團智慧財產Any unauthorized use, duplication, reproduction, or disclosure of this document may be 任何未經授權逕予複製、重製、公開或使用本文之行為,將 被視為侵害considered as infringement of MTI Group’s intellectual property rights, the infringer may 台揚集團之智慧財產權,將可因此負擔法律責任。 legal penalties.
Page 4 of 11 1. User Set Up Once you get this product, you just connect MTI USB Dongle directly to your electrical products with USB and download the Demo SW from our CD.
Please must plug two connectors once the output power is up 17dBm. 2. Start Demo DW 2.1 Double click the icon as in Fig.1 Fig.1 2.2 Plug Antenna and USB cable you could see the Demo SW shown Fig.2 Fig.
3. Inventory Run 3. 1 Please press “ Start Scan “ to start the inventory run as shown in Fig.3 and Fig.4. Fig.3 Fig.
4. Advanced Tag Setting 4.1 Please right-click on the tag that you would like to change the setting as shown in Fig.5. Fig.5 4.2 You could set EPC, Password, Lock, or Kill the selected tag in this window as shown in Fig. 6. Fig.
4.3 Option function : Memory Bank Read/Write Function. You could read Reserved, EPC, TID, and User Bank at Memory Column. Choose the one you would like to know the information and press the Read Button as shown in Fig.9. Fig. 7 a. You could see this kind of picture as in Fig. 8 if MTI module could get complete information from the tag.
Fig. 8 b. You could see this kind of picture as in Fig. 9 if MTI module couldn’t get complete information from the tag. Fig. 9 MTI Group Proprietary Information 台揚集團智慧財產Any unauthorized use, duplication, reproduction, or disclosure of this document may be 任何未經授權逕予複製、重製、公開或使用本文之行為,將 被視為侵害considered as infringement of MTI Group’s intellectual property rights, the infringer may 台揚集團之智慧財產權,將可因此負擔法律責任。 legal penalties.
11 4.4 Please read user bank if you would like to write any information into user bank. Write the information into the byte you would like to modify and press Set button as shown in Figure 10. Fig. 10 GUI would shown pass message as shown in Fig. 11. Fig.
FCC Warning statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.