Micro Device S.r.l. Installer’s guide Dual Band Model Version 1.
Micro Device s.r.l Via Bellini, 31/33 20095 Cusano Milanino (MI) Tel. +39.02.6131001 r.a. Fax. +39.02.66400086 E-mail mdevice@tin.it This document contains proprietary intellectual information exclusively owned by Micro Device S.r.l. Italy. All information contained herein is the exclusive property of Micro Device. It cannot be disclosed to anyone without the written permission of the owner.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it Summary SUMMARY .........................................................................................................................................................3 1. INTRODUCTION ............................................................................................................................................4 1.1. COMPOSITION OF THE STANDARD KIT ......
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 1. Introduction Yacht Controller Dual Band, developed by Micro Device S.r.l., is an electronic wireless remote control, able to easitly control the right and left engines, the bow and the stern thrusters and the anchor winch.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 1.1. Composition of the standard kit The kit of installation of Yacht Controller Dual Band system includes: 1 2 5 4 3 6 Figure 1: Standard installation Kit 1. 2. 3. 4. 5. 6. A receiver A transmitter Connections cables to connect the receiver based on the purchased controls options. A kit of connectors for a quick installation.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 1.2. General transmitter features On the Yacht Controller Dual Band transmitter there are levers and buttons to control the boat functions as described in figure 2. It is normal that the levers and the buttons of the transmitter correspondent to options not purchased do not work because the receiver is configured just with the electronic boards requested.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 1.3. General features of the Receiver The receiver acquires the commands of the transmitter and activates the functions of the boat accordingly. The command of the outputs occours with the activation of the switches on the transmitter.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 2. Installation and connection 2.1. Installation environment The receiver MUST be installed far away from devices (i.e. electric engines or electric lines of power) which can produce an electromagnetic field that can disturb the radio signal issued by the transmitter.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it Normally the receiver must be installed nearby the chosen helm station, which could be in the salon or on the fly according to the habits of the customer. WARNING: it is compulsory to install the receiver with the aerials upward.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 2.2.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 2.2.2 Connection of the power supply wires Choose the helm station for the installation and the space suitable to contain the receiver. WARNING: Before connecting or disconnecting the electric cables of the receiver, check that the power supply is not present and that the helm station interested in the connections is not active.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 2.2.3 Connection of the command wires of the engines WARNING: The installation of Yacht Controller Dual Band with some types of control head needs particular instructions, given as attached to the manual. Before proceeding with the installation therefore, verify the possible presence of enclosures.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 2.2.4 Connection of the command wires of the bow thruster (optional) Identify the cables coming from the joystick of command of the bow thruster and connect them in parallel to the correspondents cables of the receiver. Joystick or command switches of the bow thruster Bow thruster left BOW THRUSTER Connector Common Common Bow thruster right .
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it WARNING: Do not connect the command outputs of the receiver directly to the engines of the propeller, but always connect them to the command joystick. Verify that the necessary current doesn't overcome the 3 Adc to avoid breakups of the outputs of the receiver. 2.2.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it Acoustic signaller + External acoustic signaller 12 V 30 mA max Connector Acoustic signaller - . Figure 12: Connection scheme of the external acoustic signaller. IMPORTANT: Pay attention to the polarity of the acoustic signaller during the connection operations.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 3. Functional test IMPORTANT: If installed correctly, Yacht Controller Dual Band, does not need trims. Once connected and checked the wires, it is possible to proceed with the functional test.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it • Each activation of the outputs is signalled by the lighting of the correspondent green leds associated to each command modules on the receiver. The red leds of each module, if flashing, they signal the correct operation of it. WARNING: From now on the system is operating.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it • In order to verify the correct directional command and the identification of the engines, with the boat moored and equipped with mooring shock-absorbers, lengthen the lines of stern of at least 1-2 meters and give short commands of activation of the engines forward and reverse.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 3.1. Programming instructions The receiver in the kit is already arranged to receive the commands from the associated transmitter WARNING: The programming procedure described here must be used only to qualify the receiver for receiving commands from a further transmitter or in case of replacement of the original transmitter.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 5. Turn ON the transmitter that you want to tune in and activate the necessary combination of switches to acquire the code from the receiver. The combination foresees the contemporary activation of two switches: right engine forward and left engine forward.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 3.1.2 Cancellation of the receiver memory Sometimes deleting the memory of the receiver is needed. For example, in the case in which the transmitter has been broken or lost, or if the memory of the receiver is full and you want to change the list of the transmitters. The procedure for the cancellation of the memory of the receiver is the following: 1. 2.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 4. Expansion of the system The system Yacht Controller Dual Band allows in any moment to modify the orignal configuration. The options not initially purchased, in fact, can be ordered in a second time and installed simply inserting in the special lodgings, additional boards.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it - Cut out with a cutter the contour of the hole related to the module to insert. Figure 18 - Remove the nut of fixing from the connector of the board. Insert, then, the board in its lodging, paying attention that the male connectors on the inferior edge, perfectly enter the female connectors of the base.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it - Press the board just inserted to perfectly fit the female connectors of the base. Figure 20 - Screw the nut of fixing to the connector of the board just inserted. Figure 21 - Connect again the cables of connection. - Proceed to the installation of the new module as described in the paragraph of the chapter "Installation and connection" of the this manual.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it Figure 22 - When the acoustic signaller stop to emit, put the Dip Switch 2 OFF. - At this point the procedure has been finished.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 5. Troubleshooting This section describes some problems and malfunctions that could happen during the installation, with the probable cause and - where possible - the countermeasures to be undertaken for their solution. Problem Possible causes Remedy The receivers does not turn There is no tension to the ON. receiver. Check if the receiver has its power supply.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it Problem The acoustic signaller emits a continuous beep of 5 secs follow by a variable number of beeps. Possible causes The receiver is in alarm. Remedy The type of alarm is identified by the number of beeps emitted: 1 beep: error of the command board of the output of the engines. Contact the reseller.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it Problem Possible causes Remedy Commands of the stern thruster right and left are inverted. Wrong identifications of the wires of the joystick of the stern thruster. Invert the connection on the wires coming from the joystick. Commands up and down of the anchor winch are inverted. Wrong identifications of the wires of the anchor winch.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 6. Technical Characteristics 6.1. Transmitter Power Supply: 3 batteries 1,5V di tipo AAA (LR03) Absorption: max 40mA in trasmission Box: In ABS with protection degree IP68. Number of Channels: max 10 Transmission Code: digital at 16 bit Dimensions (LxHxW) 70 x 123 x 43 mm Weight: 145 g batteries included Frequencies: 433.92 MHz and 868.
Micro Device S.r.l. Via Bellini, 31/33 20095 Cusano Milanino (MI) ITALY Tel. +39.02.6131001 r.a. Fax +39.02.66400086 e-mail mdevice@tin.it 7. Warranty Each Yacht Controller Dual Band system is warranted for 24 months, as from the date of sale to the first user . The warranty on the Micro Device S.r.l.’s devices is for all the possible defects of material and breakdowns not caused by the customer. Regarding the installation and the possible maintenance operations, these are responsibility of the installer.
Micro Device srl Via Bellini, 31/33 20095 Cusano Milanino (MI) Tel. +39.02.6131001 r.a. Fax. +39.02.66400086 Email mdevice@tin.it Test and recording form Send by fax to Micro Device S.r.l., +39-02-66400086, to activate the warranty.
Micro Device srl Via Bellini, 31/33 20095 Cusano Milanino (MI) Tel. +39.02.6131001 r.a. Fax. +39.02.66400086 Email mdevice@tin.it 8. FCC - CE Mark 0051 YACHT CONTROLLER DUAL BAND IS A SYSTEM IN COMPLIANCE WITH THE FOLLOWING CE DIRECTIVES: DIRECTIVE R&TTE • EN 300 220-1 V2.1.1 • EN 301 489-1 (V1.8.1) + EN 301 489-3 (V1.4.
Micro Device srl Via Bellini, 31/33 20095 Cusano Milanino (MI) Tel. +39.02.6131001 r.a. Fax. +39.02.66400086 Email mdevice@tin.it FCC ID: R86TX001YCDB YACHT CONTROLLER DUAL BAND IS A SYSTEM IN COMPLIANCE WITH THE FCC DIRECTIVE. Position of the FCC mark on the receiver (above) and on the transmitter (right) Verification according to § 15.19 (a) (3): This device complies with Part 15 of the Rules.
Micro Device srl Via Bellini, 31/33 20095 Cusano Milanino (MI) Tel. +39.02.6131001 r.a. Fax. +39.02.66400086 Email mdevice@tin.it YACHT CONTROLLER DUAL AND IS A SYSTEM IN COMPLIANCE WITH CE DIRECTIVES FOR TRANSMITTERS IN NAUTICAL ENVIRONMENTS AND THE DIRICTIVES FOR ELECTOMAGNETIC COMPATIBILITY AND IMMUNITY TO ELECTOMAGNETIC DISCHARGES Conformity Declaration The manufacturer: Micro Device S.r.l.