BM71 Regulatory Compliance Information BM71 Regulatory Compliance Information Revision 0.4 Dec’ 2015 Advance Information Revision 0.
BM71 Regulatory Compliance Information This document covers the Regulatory Compliance information which is part of the BM71 Module datasheet and related documents shared with customers. Advance Information Revision 0.
BM71 Regulatory Compliance Information 1.0 ANTENNA 1.1 Antenna Characteristics 1.1.1 CERAMIC CHIP ANTENNA The BM71 module contains an integral ceramic chip antenna. The Figure 1-1 illustrates the antenna performance of the module. FIGURE 1-1: BM71 ANTENNA RADIATION PATTERN Frequency Max Gain Efficiency 2442 MHz 0.1 dBi 42.7% Advance Information Revision 0.
BM71 Regulatory Compliance Information APPENDIX A: CERTIFICATION NOTICES Note: This device has no been au orized as required by the rules of the ederal Communications Commission This device is no and may not be, offered or sale or leas or sold or leased, until au orization is obtained BM71 module regulatory approval status: • BT SIG/QDID:74246 • United States/FCC ID: A8TBM71S2 • Canada/IC ID: 12246A-BM71S2 HVIN: BM71BLES1FC2 • Europe/CE: In Progress • Japan/MIC: 005-101150 • Korea/KCC: MSIP-CRM-mcp-BM71B
BM71 Regulatory Compliance Information A user's manual for the finished product should include the following statement: is equipment has been tested and found o comply wi he limi for a Class B digi l device pursuan o pa 15 of the FCC Rule These limi s are designed provide reasonable protection agains ha ul in erence in a residential ins allation.
BM71 Regulatory Compliance Information A.2 Canada The BM71 module certification is in progress for use in Canada under Industry Canada (IC) Radio Standards Specification (RSS) RSS-247 and RSS-Gen. Modular approval permits the installation of a module in a host device without the need to recertify the device. Certification details: IC Certification Number: 12246A-BM71S2 HVIN: BM71BLES1FC2 A.2.1 LABELING AND USER INFORMATION REQUIREMENTS Labeling Requirements for the Host Device (from Section 3.
BM71 Regulatory Compliance Information A.2.2 RF EXPOSURE Note: All transmitters regulated by IC must comply with RF exposure requirements listed in RSS-102 - Radio Frequency (RF) Exposure Compliance of Radio communication Apparatus (All Frequency Bands). A.2.3 HELPFUL WEB SITES Industry Canada: http://www.ic.gc.ca/ A.
BM71 Regulatory Compliance Information TABLE A-1: Certification Safety EUROPEAN COMPLIANCE TESTING Standards Article EN60950-1:2006/A11:2010/A1:2010/ A12:2011/A2:2013 Health EN62479:2010 EMC EN301489-1 V1.9.2 Laboratory 3(1)(a) 3(1)(b) TUV Rheinland Report Number Date 10053210 001 - 10053433 001 - 10052964 001 - 10053433 001 - - - EN301489-17 V2.2.1 Radio EN300328 V1.9.1 Notified Body A.3.
BM71 Regulatory Compliance Information A.5.1 LABELING AND USER INFORMATION REQUIREMENTS The label on the final product which contains the BM71 module must follow KC marking requirements. The integrator of the module should refer to the labeling requirements for Korea available on the Korea Communications Commission (KCC) website. The BM71 module due to the limited size(9.0 x 11.5mm) the KC mark and identifier is displayed in the Datasheet only and cannot be displayed on the module label. .
BM71 Regulatory Compliance Information Appendix B: Labelling Considerations BM71 module, due to the module dimension limitation, could not add the certificate ID on module directly, we would like to apply for your permission to add the certificate ID on the Datasheet and alternatively on the shipping package instead of on module. : Description 1. BM71 Module dimension 2 Area A: 1.5X8.5mm 2 Area B: 7.7X6.1mm , this is a shielding case with a label for BT address and date code 2 Area C: 3.5X8.
BM71 Regulatory Compliance Information Appendix B-1 There is an anti-static bag outside the module tray, we suggest adding the certificate ID on the bag, it is very clear for the custom and government to check the ID, and we will also add the certificate ID information in the module user manual to avoid any possible confusion by the user. Advance Information Revision 0.