BM62 Regulatory Compliance Information BM62 Regulatory Compliance Information Revision 0.3 May’ 2016 Preliminary Revision 0.
BM62 Regulatory Compliance Information This document covers the Regulatory Compliance information which is part of the BM62 Module datasheet and related documents shared with customers. Preliminary Revision 0.
BM62 Regulatory Compliance Information 1.0 ANTENNA 1.1 Antenna Characteristics 1.1.1 PCB ANTENNA The BM62 module contains an integral PCB antenna. The Figure 1-1 illustrates the antenna performance of the module. FIGURE 1-1: BM62 ANTENNA RADIATION PATTERN Preliminary Revision 0.
BM62 Regulatory Compliance Information APPENDIX A: CERTIFICATION NOTICES Note: devices, computer peripherals, radio receivers, etc.; and to additional authorization requirements for the non-transmitter functions on the transmitter module (i.e., Verification, or Declaration of Conformity) (e.g., transmitter modules may also contain digital logic functions) as appropriate.
BM62 Regulatory Compliance Information neering and Technology (OET) Laboratory Division Knowledge Database (KDB) http://apps.fcc.gov/oetcf/kdb/index.cfm. A.1.3 RF EXPOSURE All transmitters regulated by FCC must comply with RF exposure requirements.
BM62 Regulatory Compliance Information A.2.2 Note: RF EXPOSURE All transmitters regulated by IC must comply with RF exposure requirements listed in RSS-102 - Radio Frequency (RF) Exposure Compliance of Radio communication Apparatus (All Frequency Bands). A.2.3 HELPFUL WEB SITES Industry Canada: http://www.ic.gc.ca/ A.
BM62 Regulatory Compliance Information TABLE A-1: Certification Safety EUROPEAN COMPLIANCE TESTING Standards EN60950-1:2006/A11:2010/A1:2010/ A12:2011/A2:2013 Health EN62479:2010 EMC EN301489-1 V1.9.2 Radio EN300328 V1.9.1 Article Laboratory xxxxxxxx xxx xxxxxxxx xxx 3(1)(a) 3(1)(b) TUV Rheinland EN301489-17 V2.2.1 Notified Body A.3.
BM62 Regulatory Compliance Information A.5.1 第十四條 低功率射頻電機之使用不得影響飛航安全及 干擾合法通信; 經發現有干擾現象時,應立即停用,並改善至無干擾時 方得繼續使用。 前項合法通信,指依電信規定作業之無線電信。 低功率射頻電機須忍受合法通信或工業、科學及醫療用 電波輻射性 LABELING AND USER INFORMATION REQUIREMENTS The label on the final product which contains the BM62 module must follow KC marking requirements. The integrator of the module should refer to the labeling requirements for Korea available on the Korea Communications Commission (KCC) website. The BM62 module is labeled with its own KC mark.