User's Manual

ManualsBrandsMicro Star International ManualsComputers & AccessoriesWIRELESS 11B CARDBUS CARD

Specifications

Form Factor CardBus

Operation voltage 3.3 V

Standard IEEE802.11b

Frequency Range 2.4GHz to 2.4835GHz

Data Rate and IEEE 802.11b(Auto-Fallback):

Modulation Types - CCK @ 5.5 and 11 Mbps

- DQPSK @ 2Mbps

- DBPSK @ 1 Mbps

Operating Channels - 11

Media Access Protocol CSMA/CA

Security / Encryption 64-/128-bit WEP

Range Open Space:

- 170m @ 11 Mbps

Indoor:

- 120m @ 11 Mbps

Antenna Internal diversity

Operating system Microsoft

Windows

98SE/

ME/2000/XP

>>> 1.3

Summary of content (6 pages)

PAGE 1
>>> 1.3 Specifications Form Factor CardBus Operation voltage 3.3 V Standard IEEE802.11b Frequency Range 2.4GHz to 2.4835GHz Data Rate and Modulation Types IEEE 802.11b(Auto-Fallback): - CCK @ 5.
PAGE 2
Environmental Operating Temperature: 0 ~ 55OC Operating Humidity: 0 ~ 95%, non-condensing EMI Compliance FCC, CE, BSMI, DGT Dimensions (WxDxH) 115 X 54 X 7mm Weight 38.
PAGE 3
>>> 1.4 System Requirements Before installing the CB11B2 (MS-6829), your PC should meet the following: Notebook PC with PC Card slot, or desktop PC with PC Card slot module. Windows® 98SE/ME/2000/XP operating system. Minimum 5MB free disk space for installing the driver and utilities. CD-ROM drive, double speed or higher. >>> 1.5 Package Contents Unpack the package and check all the items carefully. If any item contained is damaged or missing, please contact your local dealer as soon as possible.
PAGE 4
>>> 1.6 Product View Power LED - Solid BLUE, indicating that the CB11B2 (MS-6829) is power on. Golden Finger Link LED - BLUE, indicating the networking status by: ON CB11B2 (MS-6829) is connected. Flash - CB11B2 (MS-6829) is searching for available Access Point or receiving/ transmitting data over the wireless network.
PAGE 5
Hardware Installation The following diagrams provide you a basic installation for the CB11B2 (MS-6829), including how to install and remove the CardBus adapter. >>> 2.1 Connecting the CB11B2 (MS-6829) Locate the PC card slot on your notebook computer. If there is the dummy card in the slot, remove it first; then, insert the CB11B2 (MS-6829) into the slot (usually with its label facing up) and push it until it is firmly seated.
PAGE 6
>>> 2.2 Removing the CB11B2 Press the Eject Button to make it stretch out. Push the Eject Button and the CB11B2 (MS-6829) will slide out slightly. Then, pull it out of the slot. Eject Button Remove the CB11B2 (MS-6829) Before removing the CB11B2 (MS6829), you should stop the device in Windows operating system.