User Manual

The following diagrams provide you a basic installation

for your PC11B2 (MS-6828), which is suitable for most

desktop PCs. For more information about the PCI slot,

please refer to the user’s manual of your mainboard.

Remove the computer cover. Locate the available PCI

slot on your mainboard.

Step 1.

NOTE: Turn off your

system and disconnect

the power cable before

installing the PC11B2

(MS-6828).

PCI slot

Put the PC11B2 (MS-6828) directly over the PCI slot and

press it into the slot firmly.

Step 2.

Do not hold the PC11B2

(MS-6828) on the golden

finger while installing;

doing this may cause

interference or damage.

Hardware Installation

PAGE 1
Hardware Installation The following diagrams provide you a basic installation for your PC11B2 (MS-6828), which is suitable for most desktop PCs. For more information about the PCI slot, please refer to the user’s manual of your mainboard. Step 1. Remove the computer cover. Locate the available PCI slot on your mainboard. NOTE: Turn off your system and disconnect the power cable before installing the PC11B2 (MS-6828). PCI slot Step 2.
PAGE 2
Step 3. Replace the computer cover after securing the PC11B2 (MS-6828) with a bracket screw. Step 4. Connect the external antenna to the connector on the PC11B2’s (MS-6828) bracket. Connecting the external antenna If your are not skilled at installing the PCI adapter, please ask the vendor or an experienced technician for help.