FCC ID:BM100
Introducing the Star Mouse (BM100) Before you start using the BM100, be sure to read this manual in its entirety. Product View Batteries Cover Cradle Adapter Pair Button System Requirements • Bluetooth enabled computer (either built-in or with USB dongle) • • Mac OS X v10.2.8 or later Microsoft Windows 98SE/2000/ME/XP Package Content BM100, 2 AAA batteries, charging cradle, adapter, travel bag and quick guide. BM100 Installation 1.
shown above to open the battery cover. Insert 2chargeable* “AAA” batteries (included) and close the cover. * Please DO NOT put non rechargeable batteries in the mouse. Charging can cause explosion, fire and/or personal injuries. 2. Charge the batteries Connecting the cradle to the Adapter. The Cradle has two kinds of LED lights(red and green) to indicate the status. When you connect the Cradle to the Power the two color(red and green) will flash by turns.
When you don’t use the BM100 for a longer period of time, switch it off with the on/off switch on the button of the BM100 to conserve the batteries. Like this you avoid that you run out off battery life in the most crucial moments. When the blue light on the mouse is blinking, which means the batteries are in low level. Charge the batteries soon to avoid running out. *Note for Mac users: The mouse button can be configured in Exposé for specific functions. Please refer to Exposé for detailed instructions.
Use Bluetooth mouse on Windows XP SP2 Bluetooth stack steps. (1) Press the Pair Button in the bottom of the mouse for 3-5 seconds. The mouse will be switched to the standby mode for pairing. Also the scroll in the mouse will turn to light blue colour. Blue Light Pair Button (2) Make sure the Bluetooth function in your PC is active. Click the Bluetooth icon in the tray. (3) Click [Add] button on Bluetooth Devices window.
(4) Check the “My device is set up and ready to be found” and press [Next] button. Then it will start to search the Bluetooth device.
(5) Once it finds out the MIS Mouse device, choose the Mouse device and then click [Next] button. (6)Choose [Don’t use a passkey] and press [next] button.
(7) It will connect to the Bluetooth Device. There is a window pop-up. The OS will find a new Bluetooth HID Device.
(8) Press [Finish] button to finish the installation. The Bluetooth mouse will be active. * Note:If your bluetooth stack are WIDCOMM or IVT or TOSHIBA ,please go to MSI’s WEB WWW.MSI.COM to find the steps.