User's Manual

【USER MANUAL】

BT-GPEN01 Overview

Operation

1.Turn on

firstly, flip the power switch to"on",then press

the "on/of" key.The Orange LED is on,automatically off 2 seconds later,and the green LED

flashing,along with the indicated voice.

2. Change the volume

press the "+" key to increase the volume

press the "-" key to decrease the volume

10-class volume in total

3.Spot and talk

To spot the OID to interact the equivalent code content to achieve point reading

function,the green light quick flashing.

4.Bluetooth connection

press the bluetooth button once to enter the video mode,the orange light flashing, users

can connect the pen and the Android device;Press the bluetooth button again,the blue

light flashing,enter the audio mode.Long press the bluetooth button 3S to change to read

mode

5.Turn off

Long press the "on/off"key 3S.The green light flashing with

indicated voice.Flip the power swith to "off"after the voice

PAGE 1
【USER MANUAL】 BT-GPEN01 Overview Operation 1.Turn on firstly, flip the power switch to"on",then press the "on/of" key.The Orange LED is on,automatically off 2 seconds later,and the green LED flashing,along with the indicated voice. 2. Change the volume press the "+" key to increase the volume press the "-" key to decrease the volume 10-class volume in total 3.Spot and talk To spot the OID to interact the equivalent code content to achieve point reading function,the green light quick flashing. 4.
PAGE 2
Specifications ITEM Grolier Genius Pen (G-Pen) Project SN95303+ SD /Sonix OID2 (Index 65535)/Bluetooth 4.0 Shell Environmental protection ABS/Matte/Color: Blue3005C, White Dimension 140.3mm*25.6mm*23.3mm Net Weight ～45g Speaker Mobile speakerΦ17*12mm 8Ω 1.
PAGE 3
and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna.