User's Manual

MEMS EVOLUTION3 SENSOR

PRODUCT NOTICE

Product name

CAI

MEMS EVOLUTION3

SENSOR

TBA

PRODUCT NAME

MEMS Sensor

PRODUCT DESCRIPTION

The MEMS EVOLUTION3 SENSOR is a battery powered air pressure and air temperature

sensor designed to operate inside tubeless earthmover tires. This information is sent, via a

radio transmitter, to a MEMS EVOLUTION2 TRANSCEIVER unit, which is usually mounted

in the cab of the vehicle.

PAGE 1
MEMS EVOLUTION3 SENSOR PRODUCT NOTICE Product name MEMS EVOLUTION3 SENSOR CAI TBA PRODUCT NAME MEMS Sensor PRODUCT DESCRIPTION The MEMS EVOLUTION3 SENSOR is a battery powered air pressure and air temperature sensor designed to operate inside tubeless earthmover tires. This information is sent, via a radio transmitter, to a MEMS EVOLUTION2 TRANSCEIVER unit, which is usually mounted in the cab of the vehicle.
PAGE 2
FCC / IC CERTIFICATION Model FCC ID IC : RV1.30 : FI5-RV1-30E : 5056A-RV130 “This device complies with part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following 2 conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations.” Warning ! Changes or modifications not explicitly approved by Michelin will invalidate the authorization of this device.
PAGE 3
• Antenna: Internal helical * With duty cycle correction as per FCC part 15.35 Electrical Performance • Batteries: 1 x Li-ion Operating Conditions • Operating temperature range: -40°C to +125°C; -40°F to + 257°F • Operating pressure range: 100kPa to 1400kPa Absolute; 1 bar to 14 bar Absolute; 14.51 psi to 203.14 psi Absolute Storage Conditions • Storage temperature: -40°C to +60°C, -40°F to + 140°F Physical Characteristics • Approximate dimensions: L= 78mm. W= 70mm.