Miccus® Home RTX WIRELESS MUSIC TRANSMITTER & RECEIVER www.miccus.
Contents Quick Start Guide 2 Pairing 3 About the Miccus® Mini-jack RTX 4 What’s in the Box? 5 System requirements 6 Detailed Instructions for Use 6 Connecting Audio Cables 7 Pairing the Home RTX with another device 8 Factory Reset 9 FAQ and Troubleshooting 10 Specifications 11 Support 11 Quick Start Guide: • Attach the antenna: on the back of the RTX, remove the red rubber connector cover and attach the supplied antenna to the antenna terminal (turn clockwise until snug).
Out”. Some devices may require an additional audio adapter or cable which is not included. • Power on/off: Connect to USB power and hold the power button (the front center button) for 3 seconds until the indicator light turns on and begins blinking. To power off, hold the power button for 3 seconds until the indicator light turns off. Pairing: 1. Use as a transmitter (TX Mode) • Power on your headphones or other receiving device and engage Bluetooth® pairing mode, then place it near the Home RTX.
STATUS LED (Indicator Light) Pairing Mode (TX or RX) alternate flashing red and blue TX Mode connecting flashing red TX Mode connected solid red RX Mode connecting flashing blue RX Mode connected solid blue Not connected/ searching red flashing (TX mode) or blue flashing (RX mode) For detailed instructions and troubleshooting please continue reading the Home RTX user guide or visit www. miccus.com for instructional videos and helpful hints.
Add Bluetooth® wireless technology to your existing television or stereo equipment. What’s in the Box? • Miccus® Home RTX (BBRTX-01) • Dipole Antenna • AC USB Wall Adapter • USB mini cable • RCA to 3.5mm stereo Y Cable • RCA to RCA Cable • User Manual If contents are missing or damaged contact the merchant or contact us at support@miccus.com receive transmit dipole antenna power RCA audio output left/right 3.5mm audio output Mini-USB power input RCA audio input left/right 3.
System requirements Transmit Mode (TX): use the Home RTX with any device capable of receiving a Bluetooth® wireless audio signal (Bluetooth® profiles refer to this feature as A2DP). Such capable devices include Bluetooth® enabled headphones/speakers or adapters such as the Miccus® Home RTX, Mini-jack AX4, or SR-71 Stealth Headphones. Receive Mode (RX): use the Home RTX with any device capable of transmitting a Bluetooth® wireless audio signal (Bluetooth® profiles refer to this feature as A2DP).
For optimal performance, always use the provided USB cable with your Home RTX. Since the RTX is a long range device and may be susceptible to RF interference, the USB cable with ferrite core can help reduce potential interference during operation. Note: Leave the Home RTX continuously powered on to automatically reconnect when the last paired device is within range. In order to maintain memory of the last paired device, the Home RTX must remain continuously connected to USB power.
• In RX mode the Home RTX receives a wireless stream of music/audio from a transmitting device such as a Smartphone or tablet and connects to your home stereo or speaker system for music output. In RX mode the cable being used must be connected to the appropriate output: either RCA (red and white) to the “RX Audio Out” or 3.5mm (mini-plug) to the “Line Out”. Use the included cable that is best for your application.
Receive (RX mode): Pairing with a Bluetooth® transmitter • Power on the RTX: press and hold the power button (3 seconds) until the indicator light begins flashing. • Press and hold the RX button 3 seconds; the indicator light will flash red and blue. • Power on your A2DP Bluetooth® profile transmitting device and engage pairing mode. • When pairing is complete, the RTX indicator will light a solid blue.
FAQ and Troubleshooting Problem Solution Home RTX does not turn on. Check the USB power connection. Audio breaks up or wireless range is too low. Make sure the antenna is attached securely and positioned correctly. No sound/audio output Check the cables to make sure they are connected to the correct jacks. Make sure you press and hold the power button for at least 3 seconds. Move the RTX away from other 2.4 GHz equipment such as Wi-Fi routers and microwaves.
Specifications • Bluetooth v2.1 + EDR (Extended Data Rate) • Supports the A2DP Bluetooth® profile • Audio Codec Support: SBC • Operating Range: (Transmitter) up to150ft, (receiving) up to 45ft • Operating Frequency: 2.402 GHz to 2.480 GHz • USB Power: DC 5V @ 500mA or higher • Size: 4.37 x 3.48 Inches Weight: 5.22 oz Support Further details and answers to common questions are found at http://www.miccus.com/help.
Federal Communications Commission (FCC) Statement: This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Tested to comply with FCC standard: FOR HOME OR OFFICE USE. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or in conjunction with any other antenna or transmitter. © 2016 Miccus, Inc. All rights reserved.
