SmartTVOke Karaoke Mixer with Digital Input & Wireless Microphones o w n e r ’ s m a n u a l
Table of Contents Safety Instructions . . . . . . . . . . . . . . . . . . . FCC Information . . . . . . . . . . . . . . . . . . . . . Welcome . . . . . . . . . . . . . . . . . . . . . . . . . Listening for a Lifetime . . . . . . . . . . . . . . . . Getting Started . . . . . . . . . . . . . . . . . . . . . Getting Connected . . . . . . . . . . . . . . . . . . . SmartTVOke Layout . . . . . .
Safety Instructions 8. Ventilation - The appliance should be situated so its location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation slots. CAUTION RISK OF SHOCK 9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat.
FCC Information CAUTION: READ THIS BEFORE OPERATING YOUR UNIT 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, granted by the FCC, to use this product. 1. To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2.
Welcome And thank you for purchasing the SmartTVOke from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches, schools, clubs and individual consumers the opportunity to sound like a star with full-scale club models, in-home systems and mobile units.
Listening for a Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Association’s Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Getting Started WHAT’S IN THE BOX • SmartTVOke • Wireless Microphones (2) • USB Power Cord with Adapter • 1/8”-to-RCA Cable • 1/8”-to-1/8” Stereo Cable • Optical Cable 8
Getting Connected PLUGGING IN THE INPUT SIGNAL FROM A SMART TV • Connect the optical cable from the Optical Out on the back of the TV into the Optical IN on the SmartTVOke. DIGITAL AUDIO OUT (OPTICAL) FROM A STEREO SOURCE • Connect either the 1/8”-to-1/8” or RCA-to-1/8” cable from the output of the music source into the 1/8” AUDIO IN jack.
Getting Connected SENDING THE OUTPUT SIGNAL TO AN AMPLIFIER • Connect the 1/8”-to-RCA or 1/8”-to-1/8” cable from the AUDIO MIXED OUT jack to an available audio input on the amplifier. Amp (Amp Not Included) TO A POWERED SPEAKER • Connect the 1/8”-to-RCA or 1/8”-to-1/8” cable from the AUDIO MIXED OUT jack into an available audio input on the powered speaker.
SmartTVOke Layout 1. CH. A/B LEDs - Indicates connection status of each microphone. 2. Status LED - Visually confirms all buttons pressed on each of the microphones. • The LED will flash once for every button pressed on either microphone. 3. Power Button/Pair ID - Turns receiver OFF/ON. • This button also toggles the microphone pairing mode. 4. Microphone Out - Provides microphone output only. 5. Optical Input - Accepts digital audio from music sources (PCM only).
Microphone Button Layout 1. FN - Toggles between Left-Mono, Right-Mono, and Stereo. 2. Mute - Mutes ALL audio output, both Mic and music. 3. Mic EQ - Toggles through Mic EQ presets. - Low-End (accentuates Bass frequencies) - Middle (accentuates Middle frequencies) - High-End (accentuates High frequencies) 4. Mic Echo - Toggles through the Echo Level presets - Off - Low - Medium - High - Maximum 5. Music Vol +/- Raises and lowers Music volume. 6. Mic Vol +/- Raises and lowers the Mic channel volume. 7.
Pairing the Microphones If the Microphones experience signal loss or drop outs, the microphones should be resynced to the receiver. In doing so, the receiver will automatically change the operational frequency of each mic. FOLLOW THE STEPS BELOW TO RESYNC THE MICROPHONES WITH A NEW FREQUENCY CHANNEL. 1. Power the receiver on - Press power button once (1x). 2. Select which Mic channel to be paired: Note: The flashing receiver LED denotes which Mic channel to be paired. A. Selecting Mic 1 to pair i.
Commonly Asked Questions 1. What is PCM Audio? • PCM stands for Pulse-Code Modulation and it is a direct digital representation of an analog signal . It means the digital signal does not contain any algorithm or implement compression . 2. Why do I hear a strange growling & buzzing noise through the Optical Input? • The strange buzzing noise is what happens when a Dolby audio signal is fed into the SmartTVOke . The audio compression used by Dolby audio signals is incompatible with the SmartTVOke .