User Manual
Table of Contents Safety Instructions . . . . . . . FCC Information . . . . . . . . . Welcome . . . . . . . . . . . . . Listening for a Lifetime . . . . Getting Started . . . . . . . . . Descriptions and Functions . Getting Connected . . . . . . . Attaching the Rack Mounts . Commonly Asked Questions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Safety Instructions 8. Ventilation - The appliance should be situated so its location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation slots. CAUTION RISK OF SHOCK CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Only refer servicing to qualified service personnel. 9.
FCC Information 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC 1. IMPORTANT NOTICE: DO MODIFY THIS by requirements. Modifications notNOT expressly approved Vocopro mayproduct, void your authority, granted by the FCC, UNIT!: This when installed as indicated in the to use this product. instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by 2.
Welcome And thank you for purchasing the Hybrid-Quad from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches, schools, clubs and individual consumers the opportunity to sound like a star with full-scale club models, in-home systems and mobile units.
Listening for a Lifetime Selecting fine audio equipment such as the unit youʼve just purchased is only the start of your musical enjoyment. Now itʼs time to consider how you can maximize the fun and excitement your equipment offers. VocoPro and the Electronic Industries Associationʼs Consumer Electronics Group want you to get the most out of your equipment by playing it at a safe level.
Getting Started IF YOU PURCHASED THE HYBRID QUAD-H - Hybrid-Quad Receiver (4) Wireless Handheld Microphones (HYBRID-QUAD-H ONLY) (2) Antennas Power Adapter 1/4-to-1/4 Mic Cable (2) Rack Ears (1 Long & 1 Short) Mounting Plate (7) Phillips Head Screws 7
Getting Started WHAT’S IN THE BOX: HYBRID QUAD-B - Hybrid-Quad Receiver (4) Wireless Bodypacks (HYBRID-QUAD-B ONLY) (4) Headset Microphones (HYBRID-QUAD-B ONLY) (4) Lapel Microphones (HYBRID-QUAD-B ONLY) (2) Antennas Power Adapter 1/4-to-1/4 Mic Cable (2) Rack Ears (1 Long & 1 Short) Mounting Plate (7) Phillips Head Screws HYBRID-QUAD HYBRID-QUAD HYBRID-QUAD HYBRID-QUAD 8
Descriptions and Functions RECEIVER - FRONT PANEL 1. ON/OFF Button - Powers the receiver on/off. 2. Mic Volume - Adjusts the volume of their respective microphone channels. 3. RF LEDs - Registers Mic status: LED will shine when associated mic is powered on. 4. AF LEDs - Registers Mic transmission: LED will flash when audio is received. 5. BNC Connectors - Used to mount antennas. RECEIVER - BACK PANEL 1. Unbalanced Mic Out - Outputs all mic signals via the included 1/4” cable to a mixer or amplifier. 2.
Descriptions and Functions HANDHELD MICROPHONE - HYBRID-QUAD-H ONLY 1. Mic Head - Picks up vocals. Note: Please hold within 5-6 inches of your mouth for best sound. 2. Mic ON/OFF Switch - Powers microphone ON/OFF. 3. Mic Battery LED - Indicates battery status. Note: When powered on, the LED will flash once and go out. When battery life is low, LED will flash continuously. 4. Battery Compartment - Insert two (2x) AA batteries to provide power.
Descriptions and Functions BODYPACK HEADSET MICROPHONES - HYBRID-QUAD-B ONLY 1. Antenna - Transmits audio to receiver. 2. ON/OFF - Powers bodypack ON/OFF. 3. Power LED - Indicates battery level. a.) Solid Green LED - Battery level is healthy and good to use. b.) Blinking Red LED - Batteries are low and require changing soon. 4. Mini-XLR Jack - Connect headset and lavalier microphone cables here. 5. Gain - Used to alter the overall volume output of the bodypack.
Getting Connected TO CONNECT TO A MIXER UNBALANCED 1/4” 1. Connect unbalanced 1/4” cable (included) to the unbalanced output from the Hybrid-Quad receiver. 2. Connect the other end of the 1/4” cable to a microphone input channel on a mixer/amplifier. HYBRID-QUAD 13.5V POWER IN MIX OUT CH 4 CH 3 CH 2 CH 1 Rear Panel HYBRID-QUAD Mixer BALANCED XLR (OPTIONAL) 1. Connect 4 balanced XLR cables (not included) to the balanced outputs of the Hybrid-Quad receiver. 2.
Attaching the Rack Mounts ATTACHING THE RACK MOUNTS The Hybrid-Quad is packaged with the rack mounts to attach them inside a standard 19” case. The mounts allow for a single Hybrid-Quad receiver to be installed, or allow up to two to be racked together. INSTALLING ONE RECEIVER 1. Identify the small and large rack mounts included with the system 2. Screw the mounts into to the side of the receiver. • Small and large can be installed on either side. 3.
Attaching the Rack Mounts INSTALLING TWO RECEIVERS 1. Identify the two small mounts and one metal plate included with both systems 2. Fix the metal plate onto the bottom of both receivers, as shown. • Make sure three screws are used to mount the plate to the bottom of each receiver. 3. Screw the two small mounts on either side of the two receivers. 4. Slide the entire assembly into a 19” case and secure with screws.
Commonly Asked Questions Q. What do I do if my mics are cutting in and out? A. Make sure both antennas are firmly attached to their posts. A. Keep the receiver away from fluorescent lights. A. Make sure microphones are being used within the operational range. A. Ensure batteries are not depleted. Q. There’s a thumping noise coming through the speakers, what is it? A. This typically occurs when the batteries are low. A. Less likely, it may be the power supply not providing the correct power.
FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
