User's Manual
MHD OBD2 Flasher Wifi Enet Module User Manual
1
Overview
MHD OBD2 Wifi Flasher was specially
developed and designed to operate the
Ethernet OBD2 diagnostic and coding
features via wired J2534 port and
wireless via an embedded module
based on the universal serial interface
network standard,built-in TCP / IP
protocol stack, enabling the user serial
port, Ethernet, wireless network (wifi)
interface between the conversions. the
traditional serial devices do not
demand to change any configuration,
data can be transmitted through the
Internet network. Provide a quick solution for the user’s serial devices to transfer data via
Ethernet.This product is for vehicle use only.
Features
• 2.4GHz 802.11b/g/n,compatible
•
Support IEEE 802.3
、
IEEE 802.3u
•
WiFi Client/AP/Router Mode
• Support wps/wds
• The range of baudrate: 1200~500000bps
• Support transparent transmission mode
• Support multiple security authenti-cation mechanisms:
WEP64/WEP128/ TKIP/ AES
WEP/WPA-PSK/WPA2-PSK
• Support wireless roam
• Support multiple network protocols:
PPPOE/TCP/UDP/DDDNS /DHCP/DNS/HTTP/Firewre
• Support AT+ instruction set
• Support two config methods:Serial/WEB
• Device Dimensions 87*47*26mm
•Power supply
:
DC 12V