4G LTE CPE Quick Start
Legal Information Copyright @ 2017. All rights reserved. No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of and its affiliates. reserves the right change or modify any information or specification contained in this manual without prior notice and without any liability. Limitation of Liability Due to the nature of wireless communications, transmission and reception of data can never be guaranteed. Data may be delayed, corrupted (i.e.
1 Introduction of Router Your router is for indoor use only and multiple devices like computer, landline phone or external storage device can be connected to the router to access the Internet, make telephone calls, files sharing and more.
1 2 3 4 5 6 7 Telephone ports LAN ports WAN port Power Input Standard SIM card slot Power button Reset button 8 9 10 11 12 13 14 WPS button SYS indicator RF indicator WiFi indicator ETH indicator NET indicator 4G external antenna ports(Option) Important: Router does not support Micro/Nano SIM card or any other non-standard SIM cards. The maximum gain of external antenna must exceed 2.7 dBi for below 1GHz bands, and 4.8 dBi for above 1GHz bands for RF exposure purposes of 2.1091.
2 Setup your Router Inset a standard SIM card firstly as shown in the following diagram and then connect the power adapter to the power input of the router. Press the Power button to turn on/off the router, and it will search for available mobile networks automatically. Do not inset or remove the SIM card when the router is running, as this may affect performance or damage the SIM card. To shut down the router, press and hold the power button for approximately 3 seconds.
It’s strongly suggested to change the default SSID and password by accessing to the WebUI WiFi management page to prevent unauthorized access to your WiFi network. You need to reconnect to the router’s WiFi network after changing the WiFi password. 5 Access the internet through the WAN port You can connect the router’s WAN port to the wall-mounted Ethernet port by Ethernet cable, and then choose the working mode to be Broadband mode and configure the PPPoE/Static/DHCP parameters to access to internet.
How to deal with the contents displayed issue of the WebUI Manually clear your browser’s cache (for example, open you browser and choose Internet Options > General > Browsing history > Delete.) and re-launch the WebUI page. Why the router does not work after I have finished configuring? 1. Ensure that you have a working standard Sim card inserted properly. 2. Move the router to an open space free from obstructions and make sure there are available mobile networks. 3.
Keep the length of the cable between the router and the phone less than 10 meters. The router is for indoor use only. Do not use the router outside. Do not connect telephone extensions which run outside of the building. These can result in lightning damage to your unit. Cleaning and Maintaining Use an antistatic cloth to clean the router. Do not use chemical or abrasive cleanser as these could damage the plastic case. Turn off your router before you clean it.
