Reference Manual

Table Of Contents

EasyScan USB

for reading and writing RFID tags

Additional languages available online.

u www.mt.com/EasyScan-USB-INI

Installation

Optional: The EasyScan USB can also be used as a laboratory equipment with the LabX interface via

a USB connection to a computer.

For a detailed description of how to use the EasyScan USB (connecting a USB device, using an RFID

reader), see the balance Reference Manual (RM).

u www.mt.com/XPR-analytical-RM

30419764B12/13/2018 3:46 PM- Schema ST4 PDF engine -Layout by Victor Mahler

Installation Instructions

PAGE 1
Installation Instructions EasyScan USB for reading and writing RFID tags Additional languages available online. u www.mt.com/EasyScan-USB-INI 1 Installation 1 2 Optional: The EasyScan USB can also be used as a laboratory equipment with the LabX interface via a USB connection to a computer. For a detailed description of how to use the EasyScan USB (connecting a USB device, using an RFID reader), see the balance Reference Manual (RM). u www.mt.
PAGE 2
Technical Data 2.1 General technical data EasyScan USB Electrical data: 5 V DC, 0.3 A, 1.5 W max.
PAGE 3
4 Compliance Information United States of America This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
PAGE 4
Mettler-Toledo GmbH Im Langacher 44 8606 Greifensee, Switzerland www.mt.com/contact Subject to technical changes.