User's Manual

ManualsBrandsMetroTel Corp of Minnesota ManualsElectronicsCellular Tank Monitor

OVERVIEW

The WESROC

Route Management System has been installed by your

service provider. The tank transmitter measures the tank level and will

transmit the tank level to the Base Unit whenever the level changes. The

Base Unit allows you to observe your tank level from the comfort of your

home, and it will periodically send your tank level to your service

provider.

WESROC

RMS allows your service provider to supply you with the

fastest and most accurate service possible. Never again will you have to

go outside to check your tank level, nor will you wonder if your service

provider knows the level of your tank, because now they do.

The WESROC

Route Management System will not interfere with

other wireless devices in your home.

The BASE UNIT must remain connected AC POWER in order for

WESROC

RMS to provide accurate tank levels to your service

provider.

It is imperative that you DO NOT RELOCATE OR UNPLUG any

WESROC

RMS device without first contacting your service provider

to ensure uninterrupted service.

WESROC

Route Management System (RMS)

Cellular

Base User’s Guide

You’ll Never Run Out of Propane

Tank Transmitter

Cellular Base Unit

Summary of content (8 pages)

PAGE 1
WESROC® Route Management System (RMS) Cellular Base User’s Guide Tank Transmitter Cellular Base Unit You’ll Never Run Out of Propane OVERVIEW ® The WESROC Route Management System has been installed by your service provider. The tank transmitter measures the tank level and will transmit the tank level to the Base Unit whenever the level changes. The Base Unit allows you to observe your tank level from the comfort of your home, and it will periodically send your tank level to your service provider.
PAGE 2
THIS GUIDE COVERS • Safety Instructions • Features • Installation of the WESROC RMS Deluxe Base Unit o Selecting a Location o Connecting Power ® • Operation of the WESROC RMS Deluxe Base Unit o Operational Overview o Power Up o Level Display o Digital Clock Display and Settings o Temperature Display o Display Brightness Adjustment and Temperature Scale Settings ® • Certifications • Specifications • Warranty • Troubleshooting SAFETY INSTRUCTIONS • Read all instructions prior to operation.
PAGE 3
FEATURES • A large, bright display that can be easily read from across the room. The display can be adjusted to the appropriate brightness level for various lighting conditions or an auto-off feature can be selected which will automatically turn off the display after about 4 minutes of no activity. • The Base Unit’s electronics are housed in a durable enclosure, which can be tilted to accommodate different mounting configurations. The Base Unit can sit on a flat surface or be wall mounted.
PAGE 4
® OPERATION of the WESROC RMS DELUXE BASE UNIT Operational Overview • The Base Unit has three pushbutton switches on the top: o The single button on the left-hand side is the MODE button. o The center button is the DOWN ▼ arrow. o The right-hand button is the UP ▲ arrow. • The MODE button toggles the display between Tank Level, Time, and Temperature displays. The UP/DOWN arrow buttons select which tank/transmitter is displayed.
PAGE 5
o The tank level is flashing. This occurs when the tank level has crossed a threshold specified by your service supplier. If more than one tank has crossed its specified threshold, the Base Unit will display a different tank level each minute. To return the Base Unit to its normal display mode, simply press any key. Your service provider has been notified, and they will refill your tank if you have a “keep full” account.
PAGE 6
® OPERATION of the WESROC RMS DELUXE BASE UNIT (cont) • Adjusting the Display Brightness o Press and release the MODE button to advance to the Display Brightness Adjustment. o With BRGT displayed on the right, use the UP/DOWN buttons to adjust the display brightness level shown as a flashing two-digit number on the left. o The Base Unit has seven display brightness levels with “11” being the dimmest and “77” being the brightest.
PAGE 7
Certifications Part 15 of FCC Rules (United States) • The WESROC® RMS 3G Cellular Base Unit has been tested and found to comply with part 15 of the FCC Rules. • FCC ID: RWBMT9103CBU • IC: 115A-MT9103CBU PTCRB • The WESROC® RMS 3G Cellular Base Unit has been certified by a PTCRB approved test lab for use on the GSM/UMTS digital cellular network. Cellular Carrier • The WESROC® RMS 3G Cellular Base Unit has been certified for use on the AT&T GSM (2G) and UMTS (3G) digital cellular networks.
PAGE 8
TROUBLESHOOTING Problem Blank screen Solution - Check that the AC adapter is properly installed, and there is power to the outlet. When power is applied, the Base Unit should return to the mode it was in prior to power loss. If this is the first time power has been applied, the Base Unit will default to the Tank Level Display. Blank Screen, - The auto-off feature might be active or the display Power OK brightness may be set to the minimum level, which could be difficult to see in daylight.