Owner's Manual

POWER OUTLET RELOCATOR

Installation Instructions

$63:5/2'%/

KIT CONTENTS:

HOLE SAW

FISH TAPE

(10FT)

IN-WALL POWER CABLE (9FT)

SCREWS

(4)

POWER CABLE (6FT)

IN-WALL HOUSINGS

FASCIA HOUSINGS

FEMALE

CROWN

MALE

CROWN

TOOLS NEEDED:

TAPE

MEASURE

PENCIL

TAPE

PHILLIPS

SCREWDRIVER

LEVEL

Check plug size

from your TV

Center between studs

Measure and mark the

location for holes with pencil

9FT/2.7M

MAX

Drill holes with

provided Hole Saw

Use Fish Tape to snake the In-Wall Power Cable into the wall

with the Female Tip at the top and the Male Tip at the

bottom. Use tape to secure the Fish Tape if needed.

NOTE: Snake any additional

cables at this time.

Coax cable not included.

MALE

TIP

FEMALE

TIP

PAGE 1
$6 3:5/2'%/ POWER OUTLET RELOCATOR Installation Instructions KIT CONTENTS: TOOLS NEEDED: FISH TAPE (10FT) PENCIL FEMALE CROWN MALE CROWN TAPE MEASURE IN-WALL HOUSINGS HOLE SAW TAPE PHILLIPS SCREWDRIVER SCREWS (4) FASCIA HOUSINGS IN-WALL POWER CABLE (9FT) 1 Check plug size from your TV 2 POWER CABLE (6FT) Center between studs 3 LEVEL Measure and mark the location for holes with pencil X 9FT/2.
PAGE 2
POWER OUTLET RELOCATOR $6 3:5/2'%/ Installation Instructions continued 6 At the top, insert Female Tip into the back side of an In-Wall Housing unit. Repeat at the bottom with the Male Tip. 7 Snap on Female Crown over the Plug Tip and secure with screws. Repeat at the bottom with the Male Tip and Male Crown. = 8 Fold in Dog Ears and slide Housing into wall. Repeat at the bottom with the Male Housing. 9 Level and screw Dog Ears until Housing is secure. Repeat at the bottom with the Male Housing.