Owner's Manual

ManualsBrandsMetra ManualsAudio & Video AccessoriesMetra 99-6514B Single/Double DIN Installation Kit for Select 2011-Up Dodge Charger Vehicles

CAUTION!

All accessories, switches, climate

controls panels, and especially air bag indicator

lights must be connected before cycling the

ignition. Also, do not remove the factory radio

with the key in the on position, or while the

vehicle is running.

The World’s Best Kits.



INSTALLATION INSTRUCTIONS

99-6514B

KIT FEATURES

• ISO DIN radio provision with pocket

• ISO DDIN radio provision

• Included interface retains factory screen

• Painted matte black to match factory ﬁnish

Note: Reference the Troubleshooting section for factory items known

to be no longer functional.

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Pocket • D) (4) #8 x 3/8” Phillips screws • E) (2) Plastic panel clips • F) (2) Metal panel clips

• Axxess interface and harness (not shown)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• T-30 Torx screwdriver

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Assembly

– ISO DIN radio provision with pocket .................3

– ISO DDIN radio provision ....................................3

Axxess Interface Installation .............................4-8

WIRING & ANTENNA CONNECTIONS

Wiring Harness: Interface and harness included

Antenna Adapter: 40-EU10*

Steering wheel control interface: ASWC-1*

Backup camera retention: AX-CHRYCAM-1*

* Sold separately

A B C D E F

Dodge Charger 2011-2014

Summary of content (16 pages)

PAGE 1
99-6514B I N S TA L L AT I O N I N S T R U C T I O N S Dodge Charger 2011-2014 KIT FEATURES • ISO DIN radio provision with pocket • ISO DDIN radio provision • Included interface retains factory screen • Painted matte black to match factory finish Note: Reference the Troubleshooting section for factory items known to be no longer functional.
PAGE 2
DASH DISASSEMBLY 1. For vehicles with an 8 speed transmission: 2. Unclip and remove the shifter trim panel. (Figure C) Unclip and remove the top of the shift knob assembly. Next, remove the (1) exposed T-30 Torx screw from the shift knob and then pull up on the knob to remove. (Figure A) 3. Remove (2) Phillips screws securing the pocket below the climate controls then unclip and remove the pocket. (Figure D) For vehicles without an 8 Speed transmission: 5.
PAGE 3
KIT ASSEMBLY ISO DIN radio provision with pocket ISO DDIN radio provision 1. Attach the provided clips to the radio trim panel (metal clips at top and plastic at the bottom). (Figure A) 2. Secure the pocket to the radio brackets with the (4) #8 x 3/8” Phillips pan head screws supplied. (Figure B) Clip locations (Figure A) 3. Remove the metal DIN sleeve and trim ring from the aftermarket radio. 1. Attach the provided clips to the radio trim panel (metal clips at top and plastic at the bottom).
PAGE 4
AXXESS INTERFACE INSTALLATION INTERFACE FEATURES • Provides accessory power (12-volt 10-amp) • Retains R.A.P. (retained accessory power) • Used in amplified or non-amplified systems • Provides NAV outputs (parking brake, reverse, and speed sense) • Prewired ASWC-1 harness (ASWC-1 sold separately) • Retains balance and fade • Ability to add an aftermarket backup camera or additional video input • Retains the factory display screen • Micro “B” USB updatable TABLE OF CONTENTS Connections......................
PAGE 5
CONNECTIONS From the 16-pin harness with stripped leads to the aftermarket radio: • Connect the Red wire to the accessory wire. Note: If also installing an ASWC-1 (sold separately), there will be a Red wire on the 6514 harness to connect as well. • Connect the Orange/White wire to the illumination wire, if applicable. • If the vehicles equipped with a factory amplifier, connect the Blue/White wire to the amp turn-on wire.
PAGE 6
INSTALLATION Attention! For models with a 8-inch screen, update the interface via the Axxess Updater available at axxessinterfaces.com. Select “8-inch screen” once prompted to. Instructions to update the interface are available at the end of this instruction booklet. With the key in the off position: 1. Connect the 16-pin harness with stripped leads, and the 6520 harness, into the interface. 2.
PAGE 7
VIDEO OPTION SCREEN 1. The settings screen provides access to some of the factory settings retained, and also the options available with the kit. Select Customize to access options available. (Figure A) 2. Once in the Customize menu, select Video Input 2 to select a desired source. Please note that Video Input 1 is not available with this kit. Press About to view the current software of the kit, and also the VIN of the vehicle.
PAGE 8
99-6514B I N S TA L L AT I O N I N S T R U C T I O N S UPDATING Attention: In order to update the Axxess interface, the interface must have power from the vehicle. • Download and install the Axxess Updater from axxessinterfaces.com. • Connect the USB-MINI-CAB update cable (sold separately) between the interface and the computer. The cable will connect into the micro-B USB port inside the interface. • Remove the main connector from the vehicle. This will remove power from the interface.
PAGE 9
9-6514B I N S T R U C C I O N E S D E I N S TA L AC I Ó N Dodge Charger 2011-2014 CARACTERÍSTICAS DEL KIT • Provisión de radio ISO DIN con cavidad • Provisión de radio ISO DDIN • La interfase incluida conserva la pantalla de fábrica • Pintura negro mate para igualar el acabado de fábrica Nota: Consulte la sección Solución de Problemas para conocer los artículos de fábrica que ya no funcionan..
PAGE 10
DESMONTAJE DEL TABLERO 1. Para vehículos con transmisión de 8 velocidades: Desenganche y quite la parte superior del ensamble de la perilla de la palanca de velocidades. A continuación, quite (1) tornillo Torx T-30 de la perilla de la palanca de velocidades, luego jale la perilla hacia arriba para quitarla.
PAGE 11
ENSAMBLE DEL KIT Provisión de radio ISO DIN con cavidad Provisión de radio ISO DDIN 1. Una los ganchos proporcionados al panel de la moldura del radio (ganchos metálicos en la parte de arriba y plásticos en la parte de abajo). (Figura A) 2. Atornille la cavidad en los soportes del radio con los (4) tornillos Phillips de cabeza troncocónica #8 de 3/8” suministrados. (Figura B) Ubicación de clips (Figura A) 2.
PAGE 12
INSTALACIÓN DE LA INTERFASE AXXESS CARACTERÍSTICAS DE LA INTERFASE • Provee corriente de accesorios (12 voltios 10 amperes) • Retiene R.A.P.
PAGE 13
CONEXIONES Del arnés de 16 pins con conectores pelados al radio de mercado secundario: • Conecte el cable rojo al cable de accesorios. Nota: Si también instala un ASWC-1 (se vende por separado), también se conectará un cable rojo en el arnés 6514. • Conecte el cable anaranjado/blanco con el cable de iluminación, si aplica. • Si los vehículos están equipados con un amplificador de fábrica, conecte el cable azul/ blanco al cable de encendido del amplificador.
PAGE 14
INSTALACIÓN Attention! For models with a 8-inch screen, update the interface via the Axxess Updater available at axxessinterfaces.com. Select “8-inch screen” once prompted to. Instructions to update the interface are available at the end of this instruction booklet. MONTAJE FINAL 1. Asegure el ensamblaje de radio completado al tablero usando el hardware de fábrica. 2. Vuelva a armarlo al revés de como lo desarmó usando el panel de moldura del radio 99-6514B. With the key in the off position: 1.
PAGE 15
PANTALLA DE OPERACIÓN DE VIDEO 1. La pantalla de configuración proporciona acceso a algunas de las configuraciones de fábrica retenidas, y también a las opciones disponibles con el kit. Seleccione Customize para acceder a las opciones disponibles. (Figura A) 2. Una vez en el menú Customize, seleccione Video Input 2 para seleccionar la fuente deseada. Tenga en cuenta que la entrada de video 1 no está disponible con este kit.
PAGE 16
99-6514B I N S T R U C C I O N E S D E I N S TA L AC I Ó N ACTUALIZACIÓN Atención: Con el fin de actualizar la interfaz Axxess, la interfaz debe tener alimentación desde el vehículo. • Descargue y instale Axxess Updater de axxessinterfaces.com. • Conecte el cable de actualización USB-MINI-CAB (se vende por separado) entre la interfaz y el ordenador. El cable se conectará en el puerto USB micro-B dentro de la interfase. • Retire el conector principal del vehículo. Esto eliminará la energía de la interfase.