Installation Instructions

ManualsBrandsMetra ManualsAudioHyundai Elantra GT (Without NAV) 2013-Up Car Kit

METRA - The World’s best kits

metraonline.com

Installation instructions for part 95-7357HG

CAUTION!

All accessories, switches, climate controls panels, and

especially air bag indicator lights must be connected before cycling

the ignition. Also, do not remove the factory radio with the key in the

on position, or while the vehicle is running.

REV. 9/13/2016 INST95-7357HG

• ISO DDIN radio provision

• Painted high gloss black

• A) Radio housing trim panel • B) Brackets

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7304

Antenna Adapter: • Not required

• Panel removal tool • Phillips screwdriver

TOOLS REQUIRED

Hyundai Elantra GT (without NAV) 2013-up

95-7357HG

Dash Disassembly ................................................. 2

Kit Assembly

– ISO DDIN radio provision ...................................... 3

Table of Contents

Summary of content (8 pages)

PAGE 1
® Installation instructions for part 95-7357HG Hyundai Elantra GT (without NAV) 2013-up 95-7357HG Table of Contents Dash Disassembly.................................................. 2 Kit Assembly –. ISO DDIN radio provision....................................... 3 KIT FEATURES • ISO DDIN radio provision • Painted high gloss black TOOLS REQUIRED • Panel removal tool • Phillips screwdriver KIT COMPONENTS • A) Radio housing trim panel • B) Brackets REV.
PAGE 2
95-7357HG Dash Disassembly 1. Unsnap and remove the vent panels from either side of the radio down to the shifter base. (Figure A) 2. Remove the (4) screws and remove the radio.
PAGE 3
95-7357HG Kit Assembly ISO DDIN radio provision 1. Attach the brackets to the radio housing trim panel. (Figure A) 2. Slide the radio into the bracket/ radio housing assembly and secure with the screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Test the unit for proper operation. (Figure A) (Figure B) 4. Reassemble the dash in reverse order of disassembly.
PAGE 4
® Installation instructions for part 95-7357HG IMPORTANT If you are having difficulties with the installation of this product, please call our Tech Support line at 1-800-253-TECH. Before doing so, look over the instructions a second time, and make sure the installation was performed exactly as the instructions are stated. Please have the vehicle apart and ready to perform troubleshooting steps before calling. KNOWLEDGE IS POWER REV.
PAGE 5
® Instrucciones de instalación para la pieza 95-7357HG Hyundai Elantra GT (sin NAV) 2013 y mas 95-7357HG Ensamble del kit HERRAMIENTAS REQUERIDAS • Herramienta para quitar paneles • Destornillador Phillips COMPONENTES DEL KIT • A) Panel de la moldura para carcasa del radio • B) Soportes REV. 9/13/2016 INST95-7357HG Desmontaje del tablero –. Provisión de radio ISO DDIN...................................
PAGE 6
95-7357HG Desmontaje del tablero 1. Suelte a presión y quite los paneles de las rejillas de cada lado del radio hacia la base de la palanca de velocidades. (Figura A) 2. Quite los (4) tornillos y quite el radio.
PAGE 7
95-7357HG Ensamble del kit Provisión de radio ISO DDIN 1. Coloque los soportes para el panel de ajuste carcasa de radio. (Figura A) 2. Deslice el radio en el soporte/ ensamble de carcasa del radio y sujételo con los tornillos suministrados con el radio. (Figura B) 3. Localice el arnés de cableado de fábrica en el tablero. Metra recomienda que use adaptadores adecuados de acoplamiento de Metra y/o de AXXESS. Pruebe el radio para verificar que funcione correctamente. (Figura A) (Figura B) 4.
PAGE 8
® Instrucciones de instalación para la pieza 95-7357HG IMPORTANTE Si tiene dificultades con la instalación de este producto, llame a nuestra línea de soporte técnico al 1-800-253-TECH. Antes de hacerlo, revise las instrucciones por segunda vez y asegúrese de que la instalación se haya realizado exactamente como se indica en las instrucciones. Por favor tenga el vehículo desarmado y listo para ejecutar los pasos de resolución de problemas antes de llamar.