Installation Guide

ManualsBrandsMetra ManualsAudioKia Sorento Car Stereo Installation Kit

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 11/7/2013 INST95-7355B

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

INSTALLATION INSTRUCTIONS FOR PART 95-7355B

• Double DIN radio provision

• Painted matte black

• A) Radio Housing Trim Panel • B) Brackets • C) (2) #6 x 3/8” screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7304 harness/HYBL-04 premium sound and Bluelink interface

Antenna Adapter: • Not required

• Panel removal tool • Phillips screwdriver • Socket wrench

TOOLS REQUIRED

Kia Sorento 2014-up

(excluding factory NAV equipped vehicles)

95-7355B

B C

Dash Disassembly

– Kia Sorento 2014-up ............................................ 2

Kit Assembly

– Double DIN radio provision ................................... 3

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-7355B APPLICATIONS Kia Sorento 2014-up (excluding factory NAV equipped vehicles) 95-7355B Table of Contents Dash Disassembly – Kia Sorento 2014-up ............................................ 2 Kit Assembly – Double DIN radio provision ................................... 3 KIT FEATURES • Double DIN radio provision • Painted matte black KIT COMPONENTS • A) Radio Housing Trim Panel • B) Brackets • C) (2) #6 x 3/8” screws REV.
PAGE 2
95-7355B Dash Disassembly 3. Remove the four screws securing the factory radio and remove it from the dash. (Figure D) 1. Using soft panel tools, unsnap and remove the center dash panel surrounding the radio, disconnecting the necessary harnesses. (Figure A) Continue to kit assembly 2. Remove two screws from the two vents surrounding the factory radio and remove them both.
PAGE 3
95-7355B Kit Assembly Double DIN radio provision 1. Attach the brackets to the radio housing trim panel using the (2) #6 x 3/8” screws supplied. (Figure A) 2. Slide the double DIN radio into the bracket/radio housing trim panel assembly and secure with the screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. (Figure A) (Figure B) 4.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 95-7355B KNOWLEDGE IS POWER REV. 11/7/2013 INST95-7355B Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7355B AplicAciones Kia Sorento 2014 y mas (excluyendo fábrica vehículos equipados NAV) 95-7355B Indice Desmontaje del tablero – Kia Sorento 2014 y mas ....................................... 2 Ensamble del kit – Provisión de radio ISO DIN....................................
PAGE 6
95-7355B Desmontaje del tablero 3. Quite los cuatro tornillos que sostienen el radio de fábrica y quítelo del tablero. (Figura D) 1. Utilizando herramientas blandas para el panel, desenganche y quite el panel del tablero central que rodea el radio, desconectando los arneses necesarios. (Figura A) Continúa en la página siguiente 2. Quite los dos tornillos de las dos rejillas que rodean el radio de fábrica y quítelas.
PAGE 7
95-7355B Ensamble del kit Provisión de radio doble DIN 1. Una los soportes al panel de la moldura de la carcasa del radio con los (2) tornillos #6 x 3/8” suministrados. (Figura A) 2. Deslice el radio doble DIN dentro del ensamble del soporte/moldura de la carcasa del radio y sujételo con los tornillos suministrados con el radio. (Figura B) 3. Ubique el arnés de cableado de fábrica y el conector de la antena en el tablero.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-7355B EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 11/7/2013 INST95-7355B Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.