Installation Guide

ManualsBrandsMetra ManualsAudioMetra Stereo Installation Kit

METRA. THE WORLD’S BEST KITS.™

APPLICATIONS

1-800-221-0932

metraonline.com

INSTALLATION INSTRUCTIONS FOR PART 95-7345B

WIRING & ANTENNA CONNECTIONS (Sold Separately)

Wiring Harness:

• 70-7304 - Hyundai/Kia 2010-up

Antenna Adapter:

• Not Required

Panel Removal Tool • Phillips Screwdriver • Socket Wrench

TOOLS REQUIRED

Kia Optima 2011-up

95-7345B

B CA

• A) DDIN Brackets • B) Trim Panel • C) (3) #8 x 3/8” Phillips Pan Head Screws

KIT FEATURES

KIT COMPONENTS

• Double DIN head unit provision

• Painted matte black to match factory finish

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-7345B APPLICATIONS Kia Optima 2011-up 95-7345B KIT FEATURES • Double DIN head unit provision • Painted matte black to match factory finish KIT COMPONENTS • A) DDIN Brackets • B) Trim Panel • C) (3) #8 x 3/8” Phillips Pan Head Screws A B C WIRING & ANTENNA CONNECTIONS (Sold Separately) Wiring Harness: • 70-7304 - Hyundai/Kia 2010-up Antenna Adapter: • Not Required TOOLS REQUIRED Panel Removal Tool • Phillips Screwdriver • Socket Wrench METRA.
PAGE 2
95-7345B Table of Contents Dash Disassembly – Kia Optima 2011-up 3-4 Kit Assembly – Vent transfer – ISO DIN head unit provision with pocket Caution 5 6 Metra recommends disconnecting the negative battery terminal before beginning any installation. All accessories, switches, and especially air bag indicator lights must be plugged in before reconnecting the battery or cycling the ignition. *NOTE: Refer also to the instructions included with the aftermarket radio.
PAGE 3
95-7345B Dash Disassembly 1. Unsnap and remove trim from around top center to passenger side dash. (Figure A) 2. Unsnap panel from outside edge of driver’s side dash. (Figure B) 3. Remove two screws from knee panel and pull top of panel back so it doesn’t overlap the instrument cluster. (Figure C) 4. Remove two screws from the driver’s side vent trim and remove.
PAGE 4
95-7345B Dash Disassembly 5. Remove five screws from instrument cluster and remove. (Figure E) 6. Remove four screws from the climate controls and remove. (Figure F) 7. Remove six screws securing the radio trim panel and remove. (Figure G) 8. Remove four screws securing the factory radio chassis and remove it.
PAGE 5
95-7345B Kit Assembly 1. Remove three screws and remove the vent from the factory radio panel. (Figure A) 2. Using the supplied #8 x 3/8” pan head phillips screws, install the vent to the kits trim panel.
PAGE 6
Kit Assembly 95-7345B Double DIN head unit provisions 1. Mount the radio to the DDIN Brackets with the screws supplied with the unit. (Figure A) 2. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 3. Mount the radio/bracket assembly into the dash. (Figure B) (Figure A) 4.
PAGE 7
Notes
PAGE 8
REV. 9/07/11 INSTALLATION INSTRUCTIONS FOR PART 95-7345B METRA. THE WORLD’S BEST KITS.™ metraonline.