Installation Guide

ManualsBrandsMetra ManualsAudioJeep Liberty Stereo Installation Kit

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 5/14/2015 INST95-6524B

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 95-6524B

• DoubleDINradioprovision

• Painted matte black

•A)Radiotrimpanel•B)Brackets

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS(soldseparately)

WiringHarness:•70-6502

AntennaAdapter:•40-CR10

•Phillipsscrewdriver•Panelremovaltool

•Socketwrench•Dremelorcuttingtool

TOOLS REQUIRED

Jeep Liberty 2002-2007

95-6524B

A B

Dash Disassembly

– JeepLiberty2002-2007...................................... 2

Kit Assembly

– Double DINradioprovision................................... 3

Table of Contents

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-6524B APPLICATIONS Jeep Liberty 2002-2007 95-6524B Table of Contents Dash Disassembly – Jeep Liberty 2002-2007 ...................................... 2 Kit Assembly – Double DIN radio provision ................................... 3 KIT FEATURES • Double DIN radio provision • Painted matte black KIT COMPONENTS • A) Radio trim panel • B) Brackets REV.
PAGE 2
95-6524B Dash Disassembly 1. Remove ashtray and remove one Phillips screw exposed. (Figure A) 2. Unclip and remove radio/climate control trim panel. 3. Remove (4) Phillips screws securing radio. Disconnect and remove radio. 1 4. Remove the factory climate controls. 5. Unclip and remove the 12-volt power plug. 2 3 4 Remove this area POWER OUTLET (Figure A) (Figure B) 6. Remove the factory panel clips and save for kit assembly. 7.
PAGE 3
95-6524B Kit Assembly Kit preparation 1. Attach the factory panel clips to the Metra radio trim panel. (Figure A) Double DIN radio provision 2. Attach the factory climate control to the Metra radio trim panel. (Figure A) 1. Mount the radio to the double DIN brackets with screws included with radio. (Figure A) 3. Attach factory 12-volt power plug to the Metra radio trim panel. (Figure A) 2. Locate the factory wiring harness and antenna plug in the dash.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 95-6524B KNOWLEDGE IS POWER REV. 5/14/2015 INST95-6524B Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 5
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-6524B Jeep Liberty 2002-2007 95-6524B Indice Desmontaje del tablero – Jeep Liberty 2002-2007 ...................................... 2 Ensamble del ki – Provisión de radio doble DIN.................................. 3 CaraCterístiCas del kit • Provisión de radio doble DIN • Pintura negro mate Componentes del kit A) • Panel de moldura para radio • B) Soportes REV.
PAGE 6
95-6524B Desmontaje del tablero 1. Retire el cenicero y retire un tornillo Phillips expuesto. (Figura A) 2. Desenganche y quite el panel de la moldura del radio/control de clima. 1 2 3 4 Quitar esta área 3. Quite los (4) tornillos Phillips que sostienen el radio. Desconecte y quite el radio. POWER OUTLET 4. Quite los controles del clima de fábrica. 5. Desenganche y quite el enchufe de 12 voltios. (Figura A) (Figura B) 6. Quite los ganchos del panel de fábrica y guárdelos para el ensamble del kit.
PAGE 7
95-6524B Ensamble del kit Preparación del kit 1. Coloque los ganchos del panel de fábrica en el panel de la moldura del radio Metra. Provisión de radio doble DIN 2. Coloque el control del clima de fábrica en el panel de la moldura del radio Metra. 1. Monte el radio en los soportes doble DIN con los tornillos que vienen con el radio. (Figura A) 3. Coloque el enchufe de 12 voltios de fábrica en el panel de la moldura del radio Metra. 2.
PAGE 8
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-6524B EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 5/14/2015 INST95-6524B Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.