Installation Instructions

ManualsBrandsMetra ManualsAudioFord E-Series Cutaway 2021 Car Kit

Metra. The World’s Best Kits.

INSTALLATION INSTRUCTIONS

95-5860G

Attention! With the key out of the ignition,

disconnect the negative battery terminal

before installing this product. Ensure that all

installation connections are secure before

cycling the ignition to test this product.

KIT FEATURES

• Textured trim panel designed to cover minor dash modiﬁcations.

• DDIN brackets provide stable mounting points

• Painted gray

KIT COMPONENTS

• A) Radio trim panel • B) Radio brackets • C) Speed clips (4) • D) Panel clips (4) • E) #10 x 3/4” Phillips screws (4)

TOOLS REQUIRED

• Panel removal tool • Phillips screwdriver

• Socket wrench • Cutting tool

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Preparation .......................................................2

Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

(sold separately)

Visit metraonline.com for audio and steering

wheel interface options.

Antenna adapter: 40-EU10

A B C D E

Ford E-Series Cutaway 2021

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle

speciﬁc applications

Summary of content (4 pages)

PAGE 1
95-5860G I N S TA L L AT I O N I N S T R U C T I O N S Ford E-Series Cutaway 2021 Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications KIT FEATURES • Textured trim panel designed to cover minor dash modifications.
PAGE 2
DASH DISASSEMBLY 1. Place the (4) speed clips into the sub dash. (Figure A) 1. Remove the radio using the Metra 86-9001 radio removal tools. If you do not have removal tools, the factory dash panel can be removed with the radio attached and then the radio can be removed from the dash. 2. Unsnap and remove the dash panel. (Figure A) KIT PREPARATION 2. Attach the (4) supplied panel clips to the radio trim panel. (FigureB) Continue to Kit Assembly (Figure A) 3.
PAGE 3
KIT ASSEMBLY 1. Attach the radio brackets to the radio using screws supplied with the radio. (Figure A) 2. Locate the factory wiring harness and antenna connector in the dash, and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/ or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation. 4.
PAGE 4
95-5860G I N S TA L L AT I O N I N S T R U C T I O N S Having difficulties? We’re here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.