User Manual

ManualsBrandsMetra ManualsCar & Vehicle ElectronicsMetra 95-7416G Double DIN Installation Dash Kit for 2000-20003 Nissan Maxima with Bose

INSTALLATION INSTRUCTIONS FOR PART 95-7416G

95-7416G

KIT FEATURES

• DDIN Head Unit Provision

• Painted scratch resistant gray to match

factory dash

A) Double DIN Trim Plate

KIT COMPONENTS

• Socket Wrench • Panel Removal Tool • Phillips Screwdriver

1-800-221-0932

www.metraonline.com

TOOLS REQUIRED:

APPLICATIONS

Nissan Maxima

(w/ Bose and/or comfort and

convienence packages)

2000-2003

WIRING AND ANTENNA CONNECTIONS (Sold Separately)

Harness:

• 70-7550 - Nissan harness 95-up

• 70-7551 - Nissan amp interface harness 95-up

Antenna Adapter:

• 40-NI10 - Nissan antenna adapter 1987-2008

METRA. THE WORLD’S BEST KITS.™

Summary of content (8 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-7416G APPLICATIONS Nissan Maxima (w/ Bose and/or comfort and convienence packages) 2000-2003 95-7416G KIT FEATURES • DDIN Head Unit Provision • Painted scratch resistant gray to match factory dash KIT COMPONENTS A) Double DIN Trim Plate WIRING AND ANTENNA CONNECTIONS (Sold Separately) Harness: • 70-7550 - Nissan harness 95-up • 70-7551 - Nissan amp interface harness 95-up Antenna Adapter: • 40-NI10 - Nissan antenna adapter 1987-2008 A TOOLS REQUIRED: • Socket Wre
PAGE 2
95-7416G TABLE OF CONTENTS Dash Disassembly - Nissan Maxima 2000-2003. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Kit Assembly - DDIN Head Unit Provision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 *Note: Refer also to the instructions included with the aftermarket radio.
PAGE 3
95-7416G DASH DISASSEMBLY NISSAN MAXIMA 2000-2003 A 1 Disconnect the negative battery terminal to prevent an accidental short circuit. 2 Unclip and remove the climate control vent panel. (Figure A) 3 Remove (2) Phillips screws expose behind a/c vents. (Figure A) 4 Remove the ashtray and (1) Phillips screw exposed in the ashtray cavity. (Figure B) B 5 Unclip and remove the gear shift trim panel. (Figure B) 6 Remove (2) Phillips screws exposed behind gear shift trim panel.
PAGE 4
95-7416G KIT ASSEMBLY DOUBLE DIN HEAD UNIT PROVISION *Note: Refer also to the instructions included with the aftermarket radio. A 1 Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 2 Place the 7416 DDIN trim plate over the aftermarket radio and screw the factory climate/ bracket assembly together using the ISO screws supplied with the aftermarket radio.
PAGE 5
95-7416G INSTRUCTIONS NOTES 3
PAGE 6
95-7416G INSTRUCTIONS NOTES 4
PAGE 7
95-7416G INSTRUCTIONS NOTES 5
PAGE 8
06 95-7416G INSTRUCTIONS INSTRUCTIONS METRA. THE WORLD’S BEST KITS.™ 1-800-221-0932 www.metraonline.com REV.