User Manual

ManualsBrandsMetra ManualsCar & Vehicle ElectronicsMetra 95-6522B Double DIN Stereo Install Dash Kit for Select 2002-2005 Dodge Ram

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 7/3/2014 INST95-6522B

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

Table of Contents

INSTALLATION INSTRUCTIONS FOR PART 95-6522B

• Double DIN radio provision

• Painted matte black

• A) Radio trim panel • B) Brackets • C) Retaining caps (5 large, 2 small) • D) (5) #8 x 1/2” screws • E) (2) #8 x 3/8” screws

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-6502 • CHTO-02

Antenna Adapter: • 40-CR10

• Panel removal tool • Phillips screwdriver

TOOLS REQUIRED

Dodge Ram 1500 2002-2005

Dodge Ram 2500/3500 2003-2005

(sub-dash modifications required)

95-6522B

B C D

Dash Disassembly

– Dodge Ram 2002-2005 ....................................2-3

Kit Assembly

– Double DIN radio provision ................................4-5

Summary of content (16 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-6522B APPLICATIONS Dodge Ram 1500 2002-2005 Dodge Ram 2500/3500 2003-2005 (sub-dash modifications required) Table of Contents Dash Disassembly – Dodge Ram 2002-2005 ....................................2-3 95-6522B Kit Assembly – Double DIN radio provision ................................
PAGE 2
95-6522B Dash Disassembly 1. Unclip the top edge of the trim panel below the steering column (it does not have to be removed). 2. Remove the (1) Phillips-head screw from below the right A/C vent. (Figure A) 3. Unclip and remove the dash trim panel. (Figure A) A/C controller 4. Remove the (4) Philips screws that secure the radio. Disconnect and remove the radio. 5. Remove the (4) Philips screws that secure the a/c controller (save these screws they will be reused). 6.
PAGE 3
95-6522B Dash Disassembly 7. The dash cavity will need to be cut to make room for the aftermarket equipment. Cut and remove the shelf below the factory radio. Don’t cut away the factory radio mounting positions. Rear view with panel removed. 8. Locate the spots where the two dash parts are welded together. Slide a flat head screw driver between the two plastic panels and rotate the screwdriver so that it forces the two plates apart.
PAGE 4
95-6522B Kit Assembly 1. Place the new radio trim panel into the modified factory dash panel. (Figure A) 2. Place the (5) retaining caps over the (5) lower bosses and use the included 1/2” screws to secure. (Figure B) 3. Place the (2) smaller retaining caps over the (2) upper bosses and use the included 3/8” screws to secure.
PAGE 5
95-6522B Kit Assembly ISO DDIN radio provisions 1. Attach the radio to the brackets with the screws supplied with the radio. (Figure A) 2. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 3. Mount the new radio assembly into the dash and reassemble dash in reverse order of disassembly using the 95-6522B radio trim panel.
PAGE 6
Notes 6
PAGE 7
Notes 7
PAGE 8
INSTALLATION INSTRUCTIONS FOR PART 95-6522B KNOWLEDGE IS POWER REV. 7/3/2014 INST95-6522B Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 9
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-6522B AplicAciones Dodge Ram 1500 2002-2005 Dodge Ram 2500/3500 2003-2005 (se requieren modificaciones al sub tablero) Ensamble del kit – Provisión de radio doble DIN...............................4-5 cArActerísticAs del kit • Provisión de radio doble DIN • Pintura negro mate componentes del kit A) • Panel de moldura para radio • B) Soportes • C) Tapas de sujeción (5 grandes, 2 pequeñas) D) (5) tornillos #8 x 1/2” • E) (2) tornillos #8 x 3/8” REV.
PAGE 10
95-6522B Desmontaje del tablero 1. Desenganche el borde superior del panel de la moldura debajo de la columna de dirección (no es necesario quitarlo). 2. Retire el (1) tornillo de cabeza Phillips debajo de la rejilla derecha del aire acondicionado. (Figura A) Control del aire acondicionado 3. Desenganche y quite el panel de la moldura del tablero. (Figura A) 4. Retire los (4) tornillos Phillips que sujetan el radio. Desconecte y retire el radio. Cavidad 5.
PAGE 11
95-6522B Desmontaje del tablero 7. La cavidad del tablero deberá cortarse para hacer espacio para el equipo de mercado secundario. Corte y quite la repisa debajo del radio de fábrica. No corte las posiciones de montaje del radio de fábrica. Vista trasera con el panel retirado. 8. Localice los lugares donde las dos partes del tablero están soldadas. Deslice un destornillador de cabeza plana entre los dos paneles de plástico y gire el destornillador para forzar la separación de las dos placas.
PAGE 12
95-6522B Ensamble del kit 1. Coloque el nuevo panel de la moldura del radio en el tablero central de fábrica modificado. (Figura A) 2. Coloque las (5) tapas de sujeción sobre los (5) pernos inferiores y use los tornillos de 1/2” para sujetarlo. (Figura B) 3. Coloque las (2) tapas de sujeción pequeñas sobre los (2) pernos superiores y use los tornillos de 3/8” incluidos para sujetarlos.
PAGE 13
95-6522B Ensamble del kit Provisiones de radio ISO DDIN 1. Sujete el radio a los soportes con los tornillos suministrados con el radio. (Figura A) 2. Localice el arnés de cables de fábrica en el tablero. Metra recomienda el uso de un adaptador adecuado de acoplamiento de Metra o de AXXESS. Vuelva a conectar la terminal negativa de la batería y pruebe la unidad para verificar que funcione correctamente. 3.
PAGE 14
95-6522B 6
PAGE 15
95-6522B 7
PAGE 16
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-6522B EL CONOCIMIENTO ESOWER PODER K NOWLEDGE IS P Mejore sus habilidades de instalación y fabricación REV. 7/3/2014 INST95-6522B Enhance your installation and fabrication skills by enrolling in the en most recognized and respected inscribiéndose la escuela de dispositivos electrónicos mobile school in our industry. móvileselectronics más reconocida y respetada de nuestra industria. Log onto www.installerinstitute.com or call Regístrese en www.