User Manual

ManualsBrandsMetra ManualsAutomotiveMetra 95-5819 Double DIN Installation Dash Kit for 2009 Ford F-150 (Black)

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 2/12/2014 INST95-5819

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 95-5819

• A) Double DIN radio housing • B) Double DIN brackets

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness:

• 70-5520 - Ford 2003-up

Antenna Adapter:

• 40-CR10 - Chrysler 2002-up

• Cutting tool • Phillips screwdriver

• Socket wrench

TOOLS REQUIRED

A B

• Double DIN radio provision

KIT FEATURES

Ford F-150 2009-up (only XL models without plus package)

95-5819

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-5819 Ford F-150 2009-up (only XL models without plus package) 95-5819 KIT FEATURES • Double DIN radio provision WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: • 70-5520 - Ford 2003-up Antenna Adapter: • 40-CR10 - Chrysler 2002-up TOOLS REQUIRED • Cutting tool • Phillips screwdriver • Socket wrench REV.
PAGE 2
95-5819 Dash Disassembly 95-5819 Table of Contents Ford F-150 2009-up (only XL models without plus package) Dash Disassembly 1. Unclip and remove the switch panel to the right of the cigarette lighter then remove the (1) 9/32” screw exposed. (Figure A) – Ford F-150 2009-up (only XL models without plus package) .................................. 2-3 Kit Assembly – Double DIN radio provision ..................................................................................3 2.
PAGE 3
Dash Disassembly 95-5819 Kit Assembly 95-5819 Ford F-150 2009-up Double DIN radio provision (only XL models without plus package) 1. Slide the appropriate side bracket over the mounting legs of the double DIN trim plate aligning the holes in the trim plate and the bracket and rotate inward. 4. Unclip and pull the side panels containing the A/C vents away from the radio trim panel. (Figure C) Note: The notch in the housing should be on top.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 95-5819 Double DIN radio provision 3. Cut and remove half of the top (2) mounting legs with the brackets attached. (Figure C) Cut here TopLEG leg ONLY only CUT HERE -- TOP 4. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. CUT Cut Cut Top LEG leg only ONLY CUThere HERE- TOP CUT Cut 5.