Installation Guide

ManualsBrandsMetra ManualsAudioMetra Toyota Highlander 2020 (Without Factory 12.3-inch Screen) Kit

Metra. The World’s Best Kits.

INSTALLATION INSTRUCTIONS

109 -TO7

Patent Pending

Attention! Let the vehicle sit with the key

out of the ignition for a few minutes before

removing the factory radio. When testing the

aftermarket equipment, ensure that all factory

equipment is connected before cycling the

key to ignition.

KIT FEATURES

• Speciﬁcally designed for Pioneer 9” modular radios †

† Refer to the radio manufacturer for current models

KIT COMPONENTS

• A) Screen brackets • C) Radio chassis brackets

TOOLS REQUIRED

• Panel removal tool • 10mm socket

• Phillips screwdriver

TABLE OF CONTENTS

Dash Disassembly ..................................................2

Kit Assembly ..........................................................3

WIRING & ANTENNA CONNECTIONS

(sold separately)

Wiring Harness: 70-1765 non-ampliﬁed

See metra-online.com or axxessinterfaces.com

for audio and SWC interface options

Antenna Adapter: 40-LX11

A B

Toyota Highlander

(Without factory 12.3 inch screen)

2020

Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle

speciﬁc applications

Summary of content (4 pages)

PAGE 1
09-TO7 I N S TA L L AT I O N I N S T R U C T I O N S Patent Pending Toyota Highlander (Without factory 12.3 inch screen) 2020 Visit MetraOnline.com for more detailed information about the product and up-to-date vehicle specific applications KIT FEATURES • Specifically designed for Pioneer 9” modular radios † † Refer to the radio manufacturer for current models WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: 70-1765 non-amplified See metra-online.com or axxessinterfaces.
PAGE 2
DASH DISASSEMBLY 1. Unclip and remove the trim behind the radio. Remove (4) 10mm screws exposed. (Figure A) 2. Unclip, unplug, and remove the radio and panel. (Figure B) 3. Remove (4) Phillips screws securing the factory radio to the dash panel. (Figure C) Continue to Kit Assembly 2 (Figure A) (Figure B) (Figure C) 1.800.221.0932 | MetraOnline.
PAGE 3
KIT ASSEMBLY 5. Locate the factory wiring harness and antenna connector in the dash and complete all necessary connections to the radio. Metra recommends using the proper mating adapter from Metra and/or Axxess. Test the radio for proper operation. Note: For steps 1 and 2, reference the installation manual provided with the radio for which hardware to use. The display screen and radio chassis use two different types of screws. 1.
PAGE 4
109-TO7 I N S TA L L AT I O N I N S T R U C T I O N S Having difficulties? We’re here to help. Contact our Tech Support line at: 386-257-1187 Or via email at: techsupport@metra-autosound.com Tech Support Hours (Eastern Standard Time) Monday - Friday: 9:00 AM - 7:00 PM Saturday: 10:00 AM - 7:00 PM Sunday: 10:00 AM - 4:00 PM ® KNOWLEDGE IS POWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.