User Manual

ManualsBrandsMetra Electronics ManualsCar & Vehicle ElectronicsMetra Ford/Lincoln/Mercury Installation Dash Kit for Single DIN/Double DIN/ISO Radios

INSTALLATION INSTRUCTIONS FOR PART 99-5815

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 9/17/2013 INST99-5815

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

• DIN radio provision with pocket

• ISO mount radio provision with pocket

• Double DIN radio provision

• Stacked ISO mount unit provision

• A) Radio housing (DIN and ISO DIN) • B) ISO brackets • C) ISO trim plate • D) Side brackets • E) Radio

housing (Double DIN and stacked ISO DIN) • F) Double DIN brackets • G) (4) Screws • H) (8) Spacers

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness:

• Please visit www.metraonline.com for specific

interface applications

Antenna Adapter:

• 40-CR10 - Chrysler antenna adapter 2002-up

• Cutting tool • Panel removal tool

• Phillips screwdriver • Socket set

TOOLS REQUIRED

Ford/Lincoln/Mercury 2004-2012

99-5815

See application list inside

B CA D E F

Summary of content (24 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 99-5815 APPLICATIONS See application list inside WIRING & ANTENNA CONNECTIONS (sold separately) Wiring Harness: • Please visit www.metraonline.
PAGE 2
99-5815 Applications Ford 500 ................................... 2005-2007 E-Series................................. 2009-up Edge ................................. 2007-2010 Expedition ......................... 2007-2012 Explorer ............................ 2006-2010 Explorer Sport Trac ........... 2006-2010 F-150 ............................... 2004-2008 F-Series Super Duty .............. 2005-up Focus ............................... 2005-2007 Freestar ............................ 2004-2007 Freestyle ..
PAGE 3
Dash Disassembly 99-5815 Ford F-150 2004-2008/ Edge 2007-2009/ Expedition 2007-2012, Lincoln Mark LT 2005-2008 1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) 2. Remove (4) 9/32” screws to remove the factory radio. (Figure B) Continue to kit assembly (Figure A) Ford Mustang 2005-2009 1. Remove the small rectangular shifter lever trim panel if equipped. (Figure A) 2.
PAGE 4
Dash Disassembly 99-5815 Ford 500 2005-2007/ Taurus 2008-2009, Mercury Montego 20052007/Sable 2008-2009 5. Remove (4) 9/32” screws from the radio to remove. (Figure E) Continue to kit assembly Ford Fusion 2006-2009 Mercury Milan 2006-2009 1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) Ford Freestyle 20052007/Taurus X 2008-2009 Continue to kit assembly 2. Remove (4) 9/32” screws to remove the factory radio.
PAGE 5
Dash Disassembly 99-5815 Ford Focus 2005-2007 1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) 2. Remove (4) 9/32” screws to remove the factory radio. (Figure B) Continue to kit assembly Ford Explorer/Explorer Sport Trac/Mercury Mountaineer 2006-2010 2. Remove dash panel surrounding radio to access the factory radio screws. (Figure B) 1. Unsnap and remove entire panel surrounding the radio and climate controls. (Figure A) 3.
PAGE 6
Dash Disassembly 99-5815 Lincoln Navigator 2007-2012 1. Unclip and remove the panel surrounding the shifter. (Figure A) 2. Remove (2) 9/32” screws from the bottom of the radio/climate control trim panel. (Figure B) 3. Unclip and remove the entire panel surrounding the radio and including the climate controls. (Figure B) 4. Remove (4) 9/32” screws securing the radio. Unplug and remove the radio. Kit Assembly 99-5815 Lincoln MKX 2007-2009 1.
PAGE 7
Kit Assembly 99-5815 DIN radio provision with pocket ISO mount radio provision with pocket 2. Slide the DIN cage into the radio housing and secure by bending the metal locking tabs outward. (Figure A) 1. (a) For the Ford Edge 2007-2010, Expedition 2007-2012, Fusion 2006-2009, and the Mustang 2005-2009 attach the included spacers to the back of the radio housing mounting tabs. (Figure 1A) Note: Use the screws supplied with this kit to mount the radio housing in the vehicles that require the spacers.
PAGE 8
Kit Assembly 99-5815 ISO mount radio provision with pocket 2. Mount the ISO brackets to the head unit with the screws supplied with the unit. (Figure A) 3. Slide the head unit into the radio opening until the side clips engage. (Figure B) 4. Snap the trim plate into the radio housing. (Figure B) 5. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the unit for proper operation. 6.
PAGE 9
Kit Assembly 99-5815 Double DIN radio provision Stacked ISO mount unit provision 3. Attach the double DIN brackets to the radio housing. Note: The notch in the housing should be on top. (Figure 3A, 3B) 4. Slide the double DIN radio into the radio housing/bracket assembly and secure the radio to the assembly using the screws supplied with the radio. (Figure C) 1.
PAGE 10
Kit Assembly 99-5815 Stacked ISO mount unit provision Notes 3. Attach the double DIN brackets to the radio housing. Note: The notch in the housing should be on top. (Figure 3A, 3B) 4. Slide the ISO mount units into the radio housing/bracket assembly and secure the units to the assembly using the screws supplied with the units. (Figure C) (Figure 3A) 5. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS.
PAGE 11
99-5815 Notes 11
PAGE 12
INSTALLATION INSTRUCTIONS FOR PART 99-5815 KNOWLEDGE IS POWER REV. 9/17/2013 INST99-5815 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.
PAGE 13
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-5815 APLICACIONES Lista de aplicaciones dentro CABLEAdO Y CONEXIONES dE ANTENA (se venden por separado) Arnés de cableado: • Vea www.metraonline.com para las aplicaciones de la interfaz específica Adaptador de antena: • 40-CR10 - Adaptador de antena Chrysler 2002 y mas Ford/Lincoln/Mercury 2004-2012 99-5815 REV.
PAGE 14
99-5815 Aplicaciones Ford 500 ................................... 2005-2007 E-Series................................. 2009-up Edge ................................. 2007-2010 Expedition ......................... 2007-2012 Explorer ............................ 2006-2010 Explorer Sport Trac ........... 2006-2010 F-150 ............................... 2004-2008 F-Series Super Duty .............. 2005-up Focus ............................... 2005-2007 Freestar ............................ 2004-2007 Freestyle ..
PAGE 15
Desmontaje del tablero 99-5815 Ford F-150 2004-2008/ Edge 2007-2009/ Expedition 2007-2012, Lincoln Mark LT 2005-2008 1. Quite a presión y retire todo el panel que rodea el radio y los controles de clima. (Figura A) 2. Retire (4) tornillos de 9/32 in para retirar el radio de fábrica. (Figura B) Continuará al ensamble del kit (Figura A) Ford Mustang 2005-2009 1. Retire el panel de terminación pequeño rectangular de la palanca de velocidades, si corresponde. (Figura A) 2.
PAGE 16
Desmontaje del tablero 99-5815 Ford 500 2005-2007/ Taurus 2008-2009, Mercury Montego 20052007/Sable 2008-2009 4. Desenganche y retire el panel central. (Figura D) 5. Retire (4) tornillos de 9/32 in del radio para retirarlo. (Figura E) Continuará al ensamble del kit Ford Fusion 2006-2009 Mercury Milan 2006-2009 1. Quite a presión y retire todo el panel que rodea el radio y los controles de clima. (Figura A) Continuará al ensamble del kit 2.
PAGE 17
Desmontaje del tablero 99-5815 Ford Focus 2005-2007 1. Quite a presión y retire todo el panel que rodea el radio y los controles de clima. (Figura A) 2. Retire (4) tornillos de 9/32 in para retirar el radio de fábrica. (Figura B) Continuará al ensamble del kit (Figura A) Ford Explorer/Explorer Sport Trac/Mercury Mountaineer 2006-2010 Ford E-Series 2009 y mas/F-Series Super Duty 2005-y mas 2. Retire el panel del tablero que rodea el radio para tener acceso a los tornillos del radio de fábrica.
PAGE 18
Desmontaje del tablero 99-5815 Lincoln Navigator 2007-2012 1. Desenganche y retire el panel que rodea la palanca de velocidades. (Figura A) 2. Retire (2) tornillos de 9/32 in de la parte inferior del panel de terminación del radio/de control de clima. (Figura B) 3. Desenganche y retire todo el panel que rodea el radio y que incluye los controles de clima. (Figura B) 4. Retire (4) tornillos de 9/32 in que sujetan el radio. Desenchufe y retire el radio. Ensamble del kit 99-5815 Lincoln MKX 2007-2009 1.
PAGE 19
Ensamble del kit 99-5815 Provisión de unidad central DIN con bolsillo Provisión de unidad central ISO con bolsillo 1. (a) Para el Ford Edge 2007-2010, Expedition 2007-2012, Fusion 2006-2009, y el Mustang 20052009 coloque los espaciadores incluidos en la parte posterior de las lengüetas de montaje del alojamiento del radio. (Figura 1A) Nota: Use los tornillos suministrados con este kit para montar el alojamiento del radio en los vehículos que requieren los espaciadores.
PAGE 20
Ensamble del kit 99-5815 Provisión de unidad central ISO con bolsillo 2. Monte los soportes ISO en la unidad central con los tornillos suministrados con la unidad. (Figura A) 3. Deslice la unidad central dentro de la abertura del radio hasta que se enganchen los ganchos. (Figura B) 4. Coloque a presión la placa de terminación en el alojamiento del radio. (Figura B) 5. Ubique el arnés del cableado de fábrica en el tablero. Metra recomienda usar el adaptador de acoplamiento adecuado de Metra o AXXESS.
PAGE 21
Ensamble del kit 99-5815 Provisión de unidad central doble DIN Provisión de unidad central ISO vertical 1. Para el Ford Edge 2007-2010, Expedition 2007-2012, Explorer/ Fusion/Mercury Milan 20062009, F-150 2004-2008, Ford 500/Freestyle/Mercury Montego 2005-2007, Mustang 2005-2009, y el Lincoln Mark LT 2005-2008, corte y retire las lengüetas de montaje traseras de los soportes DIN dobles. Si su vehículo no se incluyó antes, continúe con el paso 2. 2.
PAGE 22
Ensamble del kit 99-5815 Provisión de unidad central ISO vertical 3. Coloque los soportes DIN dobles en el alojamiento del radio. Nota: La muesca del alojamiento debería estar en la parte superior. (Figura 3A, 3B) 4. Deslice las unidades de montaje ISO en el conjunto del alojamiento del radio/soporte y sujete las unidades en el montaje usando los tornillos suministrados con las unidades. (Figura C) 5. Ubique el arnés del cableado de fábrica en el tablero.
PAGE 23
99-5815 Notas 11
PAGE 24
INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 99-5815 EL CONOCIMIENTO ES PODER KMejore NOWLEDGE ISinstalación POWER sus habilidades de y fabricación REV. 9/17/2013 INST99-5815 Enhance your installation and fabrication skills by enrolling in the most inscribiéndose enrecognized la escuelaand derespected dispositivos mobile electronics school in our industry. electrónicos móviles más reconocida y respetada de Log onto www.installerinstitute.com or call nuestra industria.