User Manual

ManualsBrandsMetra Electronics ManualsCar & Vehicle ElectronicsMetra Double DIN Installation Kit for 2008-Up Subaru Impreza/WRX Vehicles

APPLICATIONS

METRA. The World’s best kits.

™

metraonline.com1-800-221-0932

REV. 1/21/2014 INST95-8902

CAUTION: Metra recommends disconnecting the

negative battery terminal before beginning any

installation. All accessories, switches, and especially

air bag indicator lights must be plugged in before

reconnecting the battery or cycling the ignition.

NOTE: Refer to the instructions included with the

aftermarket radio.

INSTALLATION INSTRUCTIONS FOR PART 95-8902

• Double DIN radio provision

• A) Radio housing • B) Double DIN brackets

KIT FEATURES

KIT COMPONENTS

WIRING & ANTENNA CONNECTIONS (sold separately)

Wiring Harness: • 70-7552 - Nissan/Subaru 2007-up • 70-8901 - Subaru 1990-up

• 70-8902 - Subaru 2012-up amp interface

Antenna Adapter: • 40-SB10 - Subaru antenna adapter 2005-up

• Small flat blade screwdriver • Panel removal tool • Phillips screwdriver

TOOLS REQUIRED

Subaru Forester/Impreza 2008-up

95-8902

A B

Dash Disassembly

– Subaru Forester (with DVD based NAV) 2009-2013 ......2

– Subaru Forester 2009-2013 ...................................2

– Subaru Impreza WRX 2013-up ...............................2

– Subaru Impreza WRX STI 2008-2012 .....................2

– Subaru Impreza 2008-2011 ....................................2

Kit Assembly

–

Double DIN radio provision....................................3

Table of Contents

Summary of content (4 pages)

PAGE 1
INSTALLATION INSTRUCTIONS FOR PART 95-8902 APPLICATIONS Subaru Forester/Impreza 2008-up 95-8902 KIT FEATURES • Double DIN radio provision REV. 1/21/2014 INST95-8902 Dash Disassembly – Subaru Forester (with DVD based NAV) 2009-2013 ......2 – Subaru Forester 2009-2013 ...................................2 – Subaru Impreza WRX 2013-up ...............................2 – Subaru Impreza WRX STI 2008-2012 .....................2 – Subaru Impreza 2008-2011....................................
PAGE 2
Dash Disassembly 95-8902 Subaru Forester (with DVD based NAV) 2009-2013/Forester 2009-2013/ Impreza WRX 2013-up/Impreza WRX STI 2008-2012/ Subaru Impreza 2008-2011 1. Unclip and remove the trim panel surrounding the factory radio including the A/C vents. (Figure A) 2. Remove (4) Phillips screws securing the radio. Unplug and remove the radio.
PAGE 3
Kit Assembly 95-8902 Double DIN radio provision 1. Snap the double DIN brackets to the inside edge of the radio housing. (Figure A) 2. Slide the double DIN radio into the bracket/radio housing assembly and secure the radio to the assembly using the screws supplied with the radio. (Figure B) 3. Locate the factory wiring harness in the dash. Metra recommends using the proper mating adapter from Metra or AXXESS. Re-connect the negative battery terminal and test the radio for proper operation. 4.
PAGE 4
INSTALLATION INSTRUCTIONS FOR PART 95-8902 KNOWLEDGE IS POWER REV. 1/21/2014 INST95-8902 Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow. Metra recommends MECP certified technicians METRA. The World’s best kits.™ 1-800-221-0932 metraonline.