Incubator Monitoring Series Operation and Installation Manual
A3-MT300 [Manufacturer]: Wuhan Huchuang Union Technology Co., Ltd. [Production Address]: No.1 Workshop, 1F, Building B10, Wuhan Hi-Tech Medical Device Park, No. 818 Gaoxin Avenue, East Lake Hi-Tech Development Zone, Wuhan, Hubei, China [After-Sales Service Unit]: Wuhan Huchuang Union Technology Co., Ltd.
A3-MT300 Contents 1 Overview .................................................................................................................................................................3 1.1 Operation Instructions of Manual .................................................................................................................3 1.2 Overview ......................................................................................................................................................3 1.
A3-MT300 1 Overview 1.1 Operation Instructions of Manual 1.1.1 It is not allowed to print or disclose any content of this Manual, including pictures and audio products, under any name without the consent of Huchuang Union; 1.1.2 The equipment operator may copy some sections of this Operation Manual for internal use only, such as for instructing the user how to deal with emergencies. These sections are clearly listed in the catalogue of this manual; 1.1.3 Wuhan Huchuang Union Technology Co., Ltd.
A3-MT300 1.4.3 According to national regulations, the compositions of the main raw materials of MT300 equipment shall be are shown in (Table 1).
A3-MT300 data; If no sensor is connected or data is invalid, "--:--" is displayed. The data is uploaded once every 3 minutes by default. b) Push-type buttons: Set the relevant parameters through button operations. c) Antenna. d) Network port holder: Used to connect MT300S or MT300SP. e) Power interface: Equipped with a 5V/2A power adapter. f) Switch Testing Interface/ Switch Indicator: The two-way 2-pin connection terminal is mainly used to test the switch.
A3-MT300 uploaded. g) Upgrade Debugging Port: Micro USB interface; it has 2 functions: Firstly, it can be used for program upgrade: The special USB cable customized by the company is used for upgrading program; secondly, it is used to modify parameters: The special USB cable customized by the company shall be used for modifying parameters; it needs to work with the modification software of " Huchuang Union Wireless Slaver Debugging Platform.exe".
A3-MT300 2.2 Structure Features of MT300SP a) Connecting wire used to connect with MT300 display terminal b) Temperature/ humidity test port c) Oxygen test port d) Carbon dioxide test port 2.3 Equipment Parameters Table 3 MT300 Parameters Item Overall dimensions Weight Transmission method Working frequency band Transmission distance Parameter 103.
A3-MT300 inside buildings (not shielded by metal objects) under the transmission rate of 10Kbps None Sensor It works with MT300SP to test the temperature, O2 concentration, CO2 concentration and humidity; 1. RJ45 interface External Interface 2. Pluggable terminal block Power failure alarm Audible and visual alarm 1000mAh, providing the power supply for more than Battery 2 hours after power failure in fully charged state Display screen 2.
A3-MT300 Display resolution Temperature test accuracy Temperature test range O2 concentration test accuracy O2 concentration test range CO2 concentration test accuracy CO2 concentration test range Humidity test accuracy ±0.1℃(37℃) 0℃~+50℃ ±0.1% 0%~30% ±0.1% 0%~10% ±2% Humidity test range 0%~100% Power supply mode DC12V/0.2A Data upload frequency 1 second/ time Data transmission mode Wireless transmission working with MT300 Preheating time 3 0.
A3-MT300 a) UP key b) DOWN key c) OK key d) Menu key 3.2.
A3-MT300 OK key: Press it to enter "System information interface"; Menu key: Press it to enter "Parameter setting interface"; 3.2.3 Instructions of Setting Interface Press the "MENU" button on the main interface to enter the "Setting interface" which includes three pages and can flip, as shown in the picture below: Menu Function Description: "1. SET TEMP": Temperature calibration function; "2. SET O2": O2 concentration calibration function; "3. SET CO2": CO2 concentration calibration function; "4.
A3-MT300 UP key: Press this key to move to the previous option; DOWN key: Press this key to move to the next option; "OK" key: Confirm the selection; "MENU" key: The system exits and returns to the main screen (or the system automatically returns to the main screen after 30 seconds) when the button is pressed; 3.2.4 "1.SET TEMP" Select "1.
A3-MT300 UP key: Press this button to add the value by 0.01 ℃ and press and hold this button to add the value by 1 ℃ DOWN key: Press this button to reduce the value by 0.01 ℃ and press and hold this button to reduce the value by 1 ℃ OK key: Start calibration again Menu key: The system returns to the setting interface when this key is pressed (the system will save the calibrated value automatically) Note: 1. Temperature calibration setting range: From 0 ℃ to 50 ℃; 3.2.5 "2.SET O2" Select "2.
A3-MT300 reduce the value by1% OK key: Start calibration again Menu key: The system returns to the setting interface when this key is pressed (the calibration fails and the system does not save the calibrated value) Interface and Operation Instructions Upon Successful O2 Concentration Calibration UP key: Press this button to add the value by 0.1% and press and hold this button to add the value by 1% DOWN key: Press this button to reduce the value by 0.
A3-MT300 UP key: No function DOWN key: No function OK key: The system returns to the setting interface when this key is pressed Menu key: The system returns to the setting interface when this key is pressed Interface and Operation Instructions Upon CO2 Concentration Calibration Failure UP key: Press this button to add the value by 0.1% and press and hold this button to add the value by 1% DOWN key: Press this button to reduce the value by 0.
A3-MT300 RH Calibration Interface: Relative Humidity Calibration Interface and Operation Instructions When MT300SP Is Not Connected UP key: No function DOWN key: No function OK key: The system returns to the setting interface when this key is pressed Menu key: The system returns to the setting interface when this key is pressed Interface and Operation Instructions Upon MT300SP Humidity Calibration Failure UP key: Press this button to add the value by 0.
A3-MT300 2. The humidity calibration is only applicable for MT300SP; 3.2.8 "5. SET DATA FREQ" Select "5.
A3-MT300 Operation Instructions of Buttons: UP key: Press this button to add the value by 1 (in the range from 1~3); DOWN key: Press this button to reduce the value by 1 (in the range from 1~3); "OK" key: The system saves the parameter and returns to the main interface when this key is pressed; "MENU" key: The system does not save parameter and directly returns to the main interface (or the system automatically returns to the main screen after 30 seconds) when the button is pressed; Note: Value 0- Indicati
A3-MT300 pressed; "MENU" key: The system does not save parameter and directly returns to the main interface (or the system automatically returns to the main screen after 30 seconds) when the button is pressed; Note: This delay time affects the switch test sensitivity: The longer the time is, the lower the sensitivity will be; the shorter the time is, the higher the sensitivity will be; the lower the sensitivity is, the better it can filter the alarm signal triggered in a short time to prevent frequent alar
A3-MT300 frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
A3-MT300 Wuhan Huchuang United Technology Co., Ltd. Address: No.1 Workshop, 1F, Building B10, Wuhan Hi-Tech Medical Device Park, No.