User's Manual

1
User Manual
Product Specifications
Model number: P3NEC4
Input: 4 x 1.5V Alkaline batteries
Operating temperature: 0°C to 35°C
What’s in the box
Wall clock, Four AA batteries, Drywall screw, Drywall anchor.
Wall mounting instructions
Use a 5.5mm (7/32 inch) drill bit (not included) for optimal wall mounting. Following the mounting steps
below:
Step 1: Drill hole into wall,
Step 2: push plasterboard mount into drilled hole,
Step 3: crew in plasterboard screw,
Step 4: hang the wall clock.
Safety and Compliance Information
Using Your Device Around Other Electronic Devices
The Device generates, uses, and can radiate radio frequency (RF) energy and, if not used in accordance
with its instructions, may cause interference to radio communications and electronic equipment.
External RF signals may affect improperly installed or inadequately shielded electronic operating
systems, entertainment systems, and personal medical devices.
While most modern electronic equipment is shielded from external RF signals, if in doubt, check with
the manufacturer. For personal medical devices (such as pacemakers and hearing aids), consult with
your physician or the manufacturer to determine if they are adequately shielded from external RF
signals.
There are some places where RF signals could constitute a hazard, such as health care facilities, and
construction sites. If you are not sure, look around for signs indicating that two-way radios or mobile
phones should be turned off.
Other Safety Considerations